GSX config for MK-Studios Montreal.
A lot to read and absorb on this one!
All the gates at the main terminal and the Aeroquay satellite has been edited. Did not edit any of the N,W or E stands.
GATES:
Edited vehicle placement
Custom pushbacks
Underground refuelling
Correct handling and catering options. (I researched a little bit).
Because the walkins are edited with both CRJ, ATR (and the E-Jets a little bit) some of the paths look a little strange if you use the CRJ.
This is because the pax have to clear the loader/stairs of the ATR/E-Jets.
All jetway heights adjusted. No heads sticking out!
Aeroquay satelite terminal:
Gate 17 & 21 are walk-in gates for 737 size jets. Gates have jetways but i disabled it so we have a couple of walkins for medium jets.
19, 19A, 19B, 21A, 21B, 23-34 are walk-in gates edited with CRJ/ATR
Terminal East:
1-7, 9, 11, 15 are jetway gates edited with 320/737
8-10-12 are small walk in gates edited with CRJ/ATR
Terminal North:
47-49, 56, 64, 66, 67, 68 are medium jetway gates edited with 320/737
50-55, 57-63, 65 are Heavy gates edited with 787-9 and checked against 747 as well.
Terminal South:
Gates 73-86 are medium jetway gates edited with 320/737
Gates 87-89 are small walk in gates edited with CRJ/ATR
Gates S1-S2-S3-S4 are Heavy cargo gates edited with 737 Cargo and 747 for size reference
Also made 7 de-icing pads on the real life de-icing center.
Lanes 2-4-5-9 are suitable for Heavy jets. 6-7-8 are small/medium.
VDGS:
I prefer GSX VDGS so this one is made primarily using GSX. I started placing them over the NOOL's but because of how these are placed both far from the aircraft and in some cases in the scenery itself, i instead removed it completely. Instructions for doing this below. I highly recommend it!
I made a extra file where i removed parking system on the default NOOL gates and kept GSX options for the rest :)
GATE ORGANIZING & CUSTOM STOP POSITION:
Finally i noticed the way MK-Studios sectioned the gates made it difficult when choosing one on arrival. Terminal gates was in 3 sections. Gate, parking and ramp. I used the python editing available in GSX. The gates i have edited are now in 4 different sections by gate number and location. Much easier to find gate when taxiing. This function also allowes us to set a more precise stop position so that all aircraft types stops at a defined mark on the tarmac.
If you don't want to use this just don't copy the cyul.py file into the gsx folder.
AS ALWAYS REMEMBER TO REPOSITION AT CURRENT GATE WHEN SPAWNING
INSTRUCTIONS:
Place ONE of the .INI files in \Users\\AppData\Roaming\virtuali\GSX\MSFS
Remember to delete or disable other ini files starting with cyul. If you wish copy the cyul.py into the same folder.
To remove NOOL VDGS go to MicrosoftFlightSimulator\Packages\Community\mkstudios-airport-cyul-montreal\SimObjects\Landmarks
or where you have CYUL installed or just search for "noolaero VDGS CYUL". Delete or remove/backup the entire "noolaero VDGS CYUL" folder.
If you have any suggestions to make or errors to report give a comment.
Regards
5 months ago
5 months ago
mortysimmer
Penasco
5 months ago
5 months ago
mortysimmer
bcote689
5 months ago
5 months ago
mortysimmer
danielrds
6 months ago
6 months ago
mortysimmer
frap99
6 months ago
6 months ago
mortysimmer
jayvinette89