Twinotter_Pilot 13 Posted December 17, 2013 Share Posted December 17, 2013 Gents I have installed Seychelles X and was doing one of your pre-saved free flights to FSSF (Frégate Island Airport). After touching down the aircraft digged itself into the earth (see attached picture) with the runway below and surface/trees above the plane. I am confident that FSSF doesnt have a subway nor an underground airstrip - would you therefore kindly check if the error replicated on your side as well. Thank you. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 17, 2013 Deputy Sheriffs Share Posted December 17, 2013 Does this only happen with a presaved flight or also with a "normal" fligfht? Link to comment Share on other sites More sharing options...
Frank Schmidt 1 Posted December 17, 2013 Share Posted December 17, 2013 Hi! You can see more reported (and unsupported) mesh issues with seychelles X in the german scenery forum: http://forum.aerosoft.com/index.php?/topic/76331-seychelles-x/ Regards, Frank Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted December 17, 2013 Aerosoft Share Posted December 17, 2013 And are we 100% sure the mesh settings are as instructed in the manual? Link to comment Share on other sites More sharing options...
Frank Schmidt 1 Posted December 17, 2013 Share Posted December 17, 2013 Hi Mathijs, Using exactly the same settings as instructed in the manual make things better but not even perfect. You can see on ground that the runway is interupted with standard ground texture. Regards, Frank Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 17, 2013 Deputy Sheriffs Share Posted December 17, 2013 Frank, according to your problem, can you exactly describe in which situation this happens? Flight from to... so I can try to reproduce it. Link to comment Share on other sites More sharing options...
Twinotter_Pilot 13 Posted December 19, 2013 Author Share Posted December 19, 2013 I was using the presaved flight. Will do some more testing today and revert back. Link to comment Share on other sites More sharing options...
KAPTEJNLN 237 Posted December 19, 2013 Share Posted December 19, 2013 ok i would have a look at it, i just wounder as those whit this problem show screenshots of the twin otter.. what about other planes? do you use FS Global? Link to comment Share on other sites More sharing options...
Tobus 161 Posted December 19, 2013 Share Posted December 19, 2013 Hi, I have the same issues. Flew with the Carenado C206 and Flight1 BN2 Islander. With the latter i flew from FSIA to FSPP to FSSF. In FSIA all seems to float above ground, like everything, including me, is on a glass plate. Some original scenery can be seen through from time to time. In FSPP no problems. In FSSF exactly the same as described above: I'm falling through the scenery. Toying with the scenery settings does not change things. I do not own FS global. See pics of the entire flight here: https://www.dropbox.com/sh/s592bks8743x08w/EbAiKLnYjs Link to comment Share on other sites More sharing options...
KAPTEJNLN 237 Posted December 19, 2013 Share Posted December 19, 2013 odd.. i would have to get the released version to se if i can se a difference.. for futher support as i hoped the beta was enough, as i dont fly there more.. Link to comment Share on other sites More sharing options...
Frank Schmidt 1 Posted December 20, 2013 Share Posted December 20, 2013 Hi Otto, I did a flight from FSSC to FSPL today with the Twin Otter Extended. All my graphic settings are made as described in the manual. The arrival at FSPL was ok, but I think that the height of the field is not as it should be. You can see on this screenshot that there is a small hill at the end of the runway and there are some palms "flying" nearby the runway. This is the situation after landing in front of the tower, saved in a Flight Simulator situation: And this is the result after restart the Flight Simulator and reload the saved situation: Any ideas? Best regards, Frank Link to comment Share on other sites More sharing options...
KAPTEJNLN 237 Posted December 20, 2013 Share Posted December 20, 2013 Im working on it, i just got the reased version you have installed.. but have you tryeid to deactivate all other airports/terrain programs? if you use terrain program i stongly advise to test whit out it as we all know it can sometimes make problems for another add-on.. as you can see it´s flat at both ends at my system Link to comment Share on other sites More sharing options...
KAPTEJNLN 237 Posted December 20, 2013 Share Posted December 20, 2013 well i have tested the areas you have reported and i can´t, see any thing wrong whit it. Based on the test I made. I also tryeid flyeing between the 2 airports and didentse a problem neither by loading a saved flight.. but im till concerned about the terrain you got.. Link to comment Share on other sites More sharing options...
KAPTEJNLN 237 Posted December 20, 2013 Share Posted December 20, 2013 even in p3d v2 it looks the same way just to test as i have no other terrain program here so i know thats might be like FSX out of the box.. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 20, 2013 Deputy Sheriffs Share Posted December 20, 2013 Can confirm the problems, that's what I see at FSIA: Was definitely not the case after installing the addon and flying there at the first time. Settings are as required. Going to find out what has changed meanwhile (beneath Orbx installs) and will try to do a fresh install. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 20, 2013 Deputy Sheriffs Share Posted December 20, 2013 Just did a fresh install and its fixed. will do a flight now to some islands. EDIT: Did a flight from FSIA to FSPP, saved the flight, closed and opened FSX, loaded the flight and flew to FSSF and everything was fine. Link to comment Share on other sites More sharing options...
KAPTEJNLN 237 Posted December 20, 2013 Share Posted December 20, 2013 so far so good, it confims that whit a fresh install it works more then on my system it seems.. Link to comment Share on other sites More sharing options...
Tobus 161 Posted December 20, 2013 Share Posted December 20, 2013 I have no general terrain addons but utx and gex. Will check for conflicting bgl's coming from mytraffic2013. Will also uninstall and reinstall seychelles x. Link to comment Share on other sites More sharing options...
KAPTEJNLN 237 Posted December 21, 2013 Share Posted December 21, 2013 well i can´t say if it might have a influence but are you sure you have the latest version of UTX as the installler from Flight1 is not the latest it´s 1.1C and the curent is 1.5 so you have to install the 2 latest 1.4 and then 1.5 in order to have the latest.. It seems a bit hidden as normaly flight1 inform you about updates but not in this case and it´s a importan changse in some regions.. update link: http://www.scenerysolutions.com/ut_downloads_FSX.html Then you talk about traffic program that could also be a posiblity as i have seen probles whit some at other add-on.. and perhaps that might explane the different elevation if it use a AFCAD file for airports around the world, and that way fsx ignore the 2 files to prevent this... Link to comment Share on other sites More sharing options...
Tobus 161 Posted December 21, 2013 Share Posted December 21, 2013 Checked: no conflicting utx files. I do have a fsia bgl from mytraffic2013, but renaming that to xxx.old_bgl and restarting fsx solves nothing. Will try uninstall and reinstall of seychelles later today. Link to comment Share on other sites More sharing options...
Tobus 161 Posted December 21, 2013 Share Posted December 21, 2013 Just uninstalled and reinstalled Seychelles X. FSSF still has the problem of having low mesh versus higher textures. FSIA seems ok now. pics still here https://www.dropbox.com/sh/s592bks8743x08w/EbAiKLnYjs As far as I can see, Seychelles X has a mesh problem in at least FSSF, sometimes at FSIA and not at FSPP. Haven't checked the other fields though. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 21, 2013 Deputy Sheriffs Share Posted December 21, 2013 Where in the scenery library is this addon exactly located? Best would be a screenshot of your library. Link to comment Share on other sites More sharing options...
Tobus 161 Posted December 21, 2013 Share Posted December 21, 2013 Right at the top, just below aes, which is #1. I have no other sceneries installed in the library regarding the region. Link to comment Share on other sites More sharing options...
KAPTEJNLN 237 Posted December 21, 2013 Share Posted December 21, 2013 ok i just spend half a day on instaling windows vista (dam im happy im not runnig that anymore z Z z..) as well as FSX to get a clean install of the project. So whit the info given i can´t reproduce it.. and lead to no problem whit the project it´self.. It has to be caused by other add-ons. im quite sure.. but where to look i don´t know as if you disable all other airports and that dosent seem to affect AES as well.. no mater how much i wnt to track the problem down i run out of things i could thing of that might cause it.. but to say there is a problem whit: Seychelles X is not true.. i normaly doesnt say so but now i tested on 3 mashines all seem fine.. can be a specific thing but as i read and try re create it i cant even if i remove some files i know, if they are missing can get a effect like you got but no it stil run whit out them.. Link to comment Share on other sites More sharing options...
Tobus 161 Posted December 21, 2013 Share Posted December 21, 2013 Continuing my search then. Will post if and when I figure it out. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.