TAGGED: -Ansys-Maxwell-electronics, ansys-circuit, ECE-model
-
-
January 21, 2024 at 1:55 pmZhengting WuSubscriber
Hi there,
I tried to use ERE3 and ECER Model to make a current and angle sweep analysis for my 3-Phase,12Poles PMSM Motor.
I want to have a current sweep between 0A and 400A, an angle sweep between 0deg and 10deg.
And the results came out strange.
-for current: I thought I would get a current Interval [-400A,400A], with 100A as a step.
-for Angel: I thought I would get an angle Interval [0deg,10deg] with 5 steps.
As you can see, the results are not what I have set.
What I try to do is the same in this link:https://www.mathworks.com/content/dam/mathworks/mathworks-dot-com/solutions/automotive/files/mac2017/deriving-fast-accurate-pmsm-motor-model-from-finite-element-analysis.pdf
There are some examples of settings on page 26 so I did the same. But the results came differently.
Wu
-
January 24, 2024 at 9:17 pmHDLIAnsys Employee
Hello Zhengting,
For the circuit, please deactivate coils and delete current sources, so we need 3 deactivated coils for 3 phase winding, ECE3, ECER and ground.
Please reviewe the tutorial in ALH if possible, https://jam8.sapjam.com/groups/NA4AXmq6h4aU43Ap36G0uU/documents/slMdBzf6vnLU0adOCR02h2/slide_viewer
Similar circuit in, ECE for SR motor
Thanks.
HDLI
-
- You must be logged in to reply to this topic.
Exploring the Power of HPC and Cloud Computing
Join us for this insightful webinar to discover how HPC and cloud computing unlocks the full potential of engineering simulation. Whether you are an engineer, IT manager, researcher, or technology enthusiast, this webinar provides the knowledge and tools to enhance your simulation workflows and drive innovation in your industry.
The Road to Innovation is Driven by Simulation
Join us for Driven by Simulation, an exciting new video series that shows how simulation enables the rapid innovation transforming the way we move — on the street, off-road, or at the track. Each episode celebrates breakthrough tech that’s paving the way for safer, faster, cleaner, more connected driving experiences.
Tensile Test Simulation Best Practices
It is fascinating to compare experimental and simulation test results for a tensile test specimen. The ability to conduct tests virtually, rather than physically, utilizing virtual simulations for testing not only increases efficiency but also leads to significant cost savings. In this crosstalk, we will address some of the challenges typically encountered in uniaxial tensile simulations.
Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
-
1129803
-
553722
-
354101
-
292839
-
210130
© 2024 Copyright ANSYS, Inc. All rights reserved.