Scenery Packages
11,446 files
-
EDSB Karlsruhe Baden-Baden
By PH20
EDSB Airport Karlsruhe Baden-Baden
Made with libraries you have already installed. I used AIP Germany charts 2018 and other information to get this airport up to date. Not exactly 100% real but detailed enough to have fun.
458 downloads
(1 review)0 comments
Submitted
-
Huey's airfield EDRK Koblenz/Winningen ( X-Plane 11 )
By Huey Pilot
The airfield Koblenz/Winningen is a commercial airfield in Rhineland-Palatinate between Koblenz and Winningen
The installation:
Even if you might have already installed one or the other library, please ''make sure to update the libraries listed below!!!'',
because the developers of the given libraries logically extend their airport parts more and more.
Install the whole and unpacked folder
"EDRK Winningen" into the "Custom Scenery" folder of your X-Plane 11. In the same folder "Custom Scenery"
also the free unpacked Liberarys mentioned here must be installed or already present.
For many users who already have other Free Airfields and Airports
have installed ,
have often already installed a large part,
because most developers use the same free libarys for airfields. So you don't load any unnecessary software into your X Plane.
To be found in the X-Plane Forum:
https://forums.x-plane.org/
Direkt Link
https://forums.x-plane.org/index.php?%2Fforums%2Ftopic%2F90776-master-list-of-libraries%2F&fbclid=IwAR1_1aMlFgydYZ6aPIFOKDEF4ruWhBdNl9KH2C7jA8ausCaIOxybwMA8x54
- MisterX Library and static aircraft extension
https://www.x-plained.com/misterx-library/
- OpenSceneryX
https://www.opensceneryx.com
always download the latest version, because the cereries are updated again and again!
- 3D_people_library
- BS2001 Object Library
- CDB-Library (latest version
)
- flags_of_the_world
- Dense_Forests_Library
- R2_Library
- simHeaven_Forests_Africa
- ruscenery
- The Handy Objects Library
- Europe_RoadTraffic
I wish all users of ''EDRK Koblenz-Winningen'' a lot of fun and break a leg, one is happy about a Like.
Hueypilot would like to thank the air traffic controllers of the airfield ''Koblenz-Winningen GmbH'' and the ''Aero Club-Koblenz'' for their great support.
Greetings Hueypilot
Please read the ''Read me'' text before using the scenery!
!! NOTE: There is a message with a small problem with existing orthophotos installed. A hangar does not stand completely on the ground, who has this problem should post me, we will find a solution.!!
Download: EDRK Koblenz Winningen for X-Plane 12
1,289 downloads
-
Bangkok Scenery
By Crp651
I created the simple buildings & landmarks in downtown area to make Bangkok city a little bit more realistic and colorful. I hope you will enjoy the flights from and to Suvarnabhumi Intl airport (VTBS) or Don Muang Intl airport (VTBD) in Bangkok.
To install this files, please place Bangkok Scenery folder inside xplane11\Custom Scenery
List of Objects included
Buildings
AIA Capital Ratchada (Office) Ananta Samakhom Throne Hall Asiatique the Riverfront (Market) Baiyoke tower Baiyoke tower 2 Bangkok Metropolitan Administration Central Embassy (Department store) Central World (Department store) Chamchuri Square (Department store) Hua Lamphong Railway Station Kasikorn Bank HQ The EmQuartier (Department store) Iconsiam (Department store) King Power Mahanakhon MBK Center (Department store) River City Bangkok (Department store) Siam Center (Department store) Siam Discovery (Department store) Siam Paragon (Department store) Stock Exchange of Thailand Terminal 21 (Department store) Landmarks
Bangkok Art & Culture Centre (Museum) Chinatown Gate Democracy Monument Giant Swing National Stadium Phra Sumen Fort Rama 8 Bridge Rama 9 Bridge Victory Monument Wat Arun Wat Pha Kaew Wat Saket
This below link may be asked to installed but not necessary.
Bangkok, Thailand
Bangkok (กรุงเทพมหานคร) is the capital city of Thailand with more than 8 millions population and more than 1,500 sq.km in area, located in Central Thailand near Chao Phraya river. The name Bangkok are derived from the word "Bang" (village) and "Makok" (Yellow mombin fruit), making the meaning of Bangkok to be "The village of mombin". The capital city is known as "Krung Thep Maha Nakhon" (The city of angels) for the locals. Bangkok is one of the top tourist destinations with more than 38 millions visitor per year. The average temperature in Bangkok is 28 °C and the average rainfall is 1400 mm of precipitation falls.
6,614 downloads
-
New River Gorge Bridge.zip
By John M D
New River Gorge Bridge. WV USA.
Runway 22 points directly at the gorge.
217 downloads
(1 review)0 comments
Submitted
-
.thumb.jpg.c98ba39353735379d98525204c591089.jpg)
ZUXC_Xichang
By Zed Romsson
Xichang Qingshan Airport IATA: XIC, ICAO: ZUXC
The airport is serving Xichang, the capital city of Liangshan Yi Autonomous Prefecture in Sichuan Province, China.
Near this city , about 30 km, there is the Xichang Satellite Launch Center.
The airport is located in high mountain valley above 1500 m and has one runway with unidirectional ILS.
It is surrounded by a lot of agricultural greenhouses, where hardworking Chinese peasants grow a lot of vegetables.
Beautiful sunsets are waiting for you if you arrive here in the evening.
To continue the ILS approach to runway 36, you must perform Hold Position over SB NDB to descend to final approach altitude,
or fly over the airport and turn around at the far end of the valley for VOR DME landing on runway 18.
It is a domestic airport, but nothing prevents you from flying here from where you want.
To improve the impression I recommend to use Ortho4XP and enable RFTC.
Used AutoGate and GroundTraffic plugins, Google ortho.
Necessary libraries:
3D_people_library
BS2001 Object Library
CDB-Library
The_Handy_Objects_Library
JB_Library
MisterX_Library
OpenSceneryX
x_Prefab_Library
ruscenery
Serviced Aircraft North America Part 1
I'm not a genius. If you find some mistakes, let me know.
If you want you can support me:)
paypal.me/justflyavia
Good flights and landings.
Enjoy!
988 downloads
-
Ogliastro Cilento Helipad , E+S Air Base - SA09
Ogliastro Cilento Helipad , E+S Air mainbase
E+S Air is one of the most important helicopter companies in Italy. They work in aerial firefighting, passenger transport and various aerial works.
In the scenery you can find the main base made with custom 3D objects. The helipad is located in Ogliastro Cilento , near Salerno.
Libraries Required
-Swisscreations
-RuScenery
-OpenScenery
-HandyObjects
-CDB Library
-R2 Library
-NAPS Library
Feel free to notify bugs / library problems and more.
188 downloads
-
india VOKN - Kannur International Airport
By Ron Baruah
Kannur International Airport (IATA: CNN, ICAO: VOKN) is an international airport serving the district of Kannur (at Mattanur), one of the northern districts in the state of Kerala, India. The airport spreads about 2,300 acres (930 ha). It is located 25 km (16 mi) east of the city, near the municipality of Mattannur. It is owned and operated by Kannur International Airport Limited(KIAL), a public–private consortium. The airport opened for commercial operations on 9 December 2018.
Installation
Download VOKN.7z Extract the package to custom scenery folder. i.e X-Plane 11/custom scenery Ensure you have the latest updated libraries. Optional
Use Ortho4xp to create +11+075 tile with the source set as GO2 as the other providers don't have imagery for the area.
Features:
Made from scratch. (Note: Even the X-Plane gateway doesn't have this airport yet) Thousands of handplaced objects to match real life scenery. 3-d custom objects wherever needed. Required libraries:
BS2001 CDB Library. Flags of World Library. Flyagi library. MisterX Library. NAPS Library. Open Scenery X. The Handy Objects Library. PP library. RA Library. Credits:
Thanks to @Avinash C for letting me use some of his 3d models which indeed form the core of the airport.
For best immersion you can try the scenery with my Matavia liveries pack.
700 downloads
-
VFR Points for Poland
By kasug
The archive contains a packet of VFR points for Polish communication, aeroclub and military airports. Visualization in the form of chimneys.
The contents of the archive should be unpacked to the Custom Scenery folder and placed at the top of the list in the file scenery_packs.ini.
Textures made by Arek Kwiatkowski - FunPage
Enjoy!
578 downloads
-
UKLR_2 Rivne
By vdfishev
Airport Rivne, Ukraine. Made for own use, but maybe someone will need ...
Libraries used the most popular and commonly available: https://forums.x-plane.org/index.php?/forums/topic/90776-master-list-of-libraries/
209 downloads
-
KBIL - Billings Logan Intl. Airport
By Captnchris
Welcome to Billings, Montana!
I'm proud to release my third project: KBIL - Billings Logan Intl. Airport
I hope everything works fine for everyone. I tried to rebuild this airport as realistic as possible - without custom objects. Only stuff from libraries. Orthophotos in ZL22 are also included.
For correct installation make sure you have all this following librarys in your Custom Scenery Folder:
- Airport Environmend HD by MisterX6 (read installation instructions)
- 3D People library
- BS2001 objects
- CDB-Library
- FJS scenery library
- FlyAgi vegetation
- gt library
- handyobjects
- MisterX library
- NAPS library
- openscenery x library
- PP library
- R2 / RA / RD / RE - library
- ruscenery
Comments and verdicts are highly appreciated. I hope everyone like it!
cheers
Chris
3,822 downloads
-
OING - Grogan International
By Renair2
Iran
Gorgan Airport is an international airport located in the city of Gorgan, Iran. The airport is located 2 km west of the Gorgan-Aq Qala Highway and 6 km north of Gorgan, the capital of Golestan province.
Requires:
NAPS Scenery Library
Mister X Scenery Library
Additional Objects included: Middle Eastern Housing by FSchutzman.
MAKE SURE 'RUNWAY FOLLOWS CONTOURS' IS SET TO ON!!!!
212 downloads
(1 review)0 comments
Updated
-
HTZA Zanzibar Abeid Amani Karume International Airport, Tanzania
By Risuali
Features
Custom ground textures for taxiways and runways
HDR taxiway signs
Optional Static aircraft
Requirements
3D_people_library
CDB-Library
MisterX_Library
FJS_Scenery_Library
THE-FAIB Aircraft Library
The_Handy_Objects_Library
RuScenery library
Installation
Simpy download the version you want and unzip and copy to your custom scenery folder
Credits
Frits Beyer
AXmiha
Pyreguee
MisterX6
Rigolan
2,032 downloads
-
NZFJ Franz Josef
By DazaXIII
This and my other airports are designed to make things to fit with the Lyndiman ortho. It’s good so it’s worth the effort of the download and you can find it here.
https://lyndiman.com/category/flight-simulation/
Video preview.
https://youtu.be/xWI5_LtVlno
Another new airport and this one is NZFJ Franz Josef on New Zealand's South Island. It’s a nice location to have a trip around the mountains and see the glacier plus you're not far from Mt Cook too. I’ve done all my usual missing autogen and adding eye candy type stuff and I quite like the way this came out so it will certainly get some use from me on those days when I’m using X Plane as a flight sim rather than a WED viewer.
Libraries – Firstly, read the “Additional Libraries” bit below. Next, search google for “X Plane Master List” and download the lot of them. I haven’t used all of those libraries in this airport but by the time I finish with New Zealand I may well have done and with other people making nice scenery it’s just useful to have everything.
Additional Libraries.
I don’t think these are part of the master list so you also need this one
https://forums.x-plane.org/index.php?/files/file/32135-world-models-library/
And this one but just the Overlay download part. You don’t need to touch the mesh part of the download if you don’t want to.
http://www.alpilotx.net/downloads/x-plane-10-new-zealand-pro/
I’ve also started using a few trees from this library and it will probably get used a lot in future airports I make
https://forums.x-plane.org/index.php?/files/file/48047-flyagi-vegetation/
I’ve started using stuff from the Puf Library which you can get here
https://forums.x-plane.org/index.php?/files/file/51510-puf-libs/
Installation and Support - Usual stuff, download, unzip, put in Custom Scenery, moan at me if it doesn’t work. Note, I’ve now done lots of airports and it’s harder to keep track of things so if you post a comment and want a response I may miss it. So if I’ve not replied in a day or two then just send me a private message instead. I will notice those and I will always reply and try to help if I can.
Credits - Big thanks to Mr Lyndiman for the ortho, the various freeware library creators, Laminar Research, the creators of WED and Overlay, the permissions I’ve received from Robin Corn and Tim Barnes for their house objects, Royaloak, Lawrie Roache, Chris Norman, Vampire and Peter Lohr for airport modifications, Zlin142’s grass, MisterX‘s hangar, md500f and Ndorfn for the objects … and also thanks to coffee… especially the coffee.
Donations – I don’t have a lot of money but your donation probably isn’t going to be big enough to be life changing for me. So if you feel my efforts are worth a small reward then please give a donation to somebody like Cancer Research instead where your little bit of cash might end up being life changing for somebody else.
375 downloads
-
VSCities - Tampa VFR
By Verticalsim
How to download:
Literally click the download button
NOT COMPATIBLE WITH GRUMPLERS VFR, PLEASE DELETE GRUMPLERS VFR
Features:
Accurate model of the Tampa area Night lighting (lights and LIT textures) DOES NOT COME WITH ORTHOS Installation:
Download and drag over to Xplane11/Custom Scenery folder Requirements:
X-Plane 11.104,074 downloads
-
Europe_Italy_LIAF
By prospero246
Foligno Airport (ICAO: LIAF) is an airport serving the Italian city of Foligno in the Umbria region. It is used for general aviation, school, business jet aviation, charter aviation and cargo. It will be used as national base of Civil defense aviation.
Reference:
Wikipedia 2018
Foligno is a city located along Central Italian region of Umbria and is renowned as an important commercial center and a vital railroad junction. Basically, this city is known for its manufacturing industry that produces paper, textiles, machinery and other transport and machinery items.
Personal comments:
I admit, I know next to nothing about this mountainous region in the heart of Italy but the area is interesting to fly in and not far from large urban centers of Rome to the South and San Marino to the North.The airport itself seems to be "well used" with a few hangars and several empty concrete patches where presumably stood other structures in the past. On the North end are several large manufacturing buildings as well as an aerospace company, all of which have been modeled in this scenery as best as possible.
Elevation is at 222 m / 728 ft and there is a single asphalt runway, 17/35 which is 1,660 m (5,446) long as well as a shorter parallel grass runway. The Adriatic is just over 100 km to the East; the Mediterranean, just slightly further to the West. If you fly almost straight West you would hit the historical island of Elba where Napoleon Bonapart was exiled and from where he escaped in 1815. You could land at LIRJ but make sure you use a GA aircraft and approach from the South to Runway 34 which is a much easier landing.
Enjoy your flight.
Installation:
Put unzipped folder, Europe_Italy_LIAF in X-Plane, Custom Scenery folder. Restart X-Plane. If scenery does not show up, make sure that it is above Global airports and any Mesh Scenery you may be using, in the scenery_packs.ini file. Remember to disable other sceneries of the same airport, if you have any. If the scenery does not look like the pictures, then you must have picked up another scenery in your Custom Scenery folder..
IMPORTANT NOTES:
I upload these sceneries to this site even though they are normally approved and later included in future versions of X-Plane so that users will have a jump start on these airports until they are in fact included in the default X-Plane version. Also, I occasionally update these sceneries and unless the update is big, then I only submit the update on this site. So, if you download any of my Canada_XX_XXXX or other sceneries and find that they are not different from the default, it is because this scenery has already been approved and included in X-Plane. If you receive any error messages during loading, please update X-Plane to the latest version.
I would suggest that if you are happy with the scenery in question, you hang on to it regardless of the fact that the present X-Plane version has the identical (approved) scenery because in later X-Plane versions this might be over-written, for better or for worse, by a different approved version. If you notice trees growing where they shouldn't or other autogen incursions, try disabling your Mesh to see if this is the problem. Please write to me if this happens. This scenery like all the others (I've updated quite a few) should be compatible with HD Mesh V4. Do not be misled by the tiny size (Less than 100 kb) of the file. This is a LEGO-BRICK scenery and uses the megabytes of art assets already included in your installation of X-Plane. It will compare favorably, at times better, to other (much larger sized) sceneries of this area and will probably exceed your expectations. Equally Important
Please take time to rate and leave a short comment or constructive criticism so that I'd know I am on the right track with these sceneries. I understand that one normally doesn't return to the download page after you've installed the scenery but try anyway. Comments do motivate scenery designers!
Also report any bugs or problems you come across while using this particular scenery.
Thank You and Enjoy the scenery!
Be Generous to:
MSF ( Doctors Without Borders/Médecins Sans Frontières )
Like yourself, this organization flies all over the world and they do tremendously good work. If you like this scenery, please consider giving them a small donation. We all win this way!
331 downloads
-
Northern territories of Canada
By Restavr
As you know, in X-Plane 11 Canada's territory from the 73rd parallel and above (North) is absent, solid water. Airports CYRB (RESOLUTE BAY), CJY2 (Little Cornwallis I), CYGZ (Grise Fjord), CJQ6 (TANQUARY FIORD) CYLT (CFS Alert), CYMD (Mould Bay), CYEU (EUREKA) swim in the ocean.
There is a paid script Grand Arctic Scenery V3, costs about $39 without a discount, so it doesn't suit everyone.
I decided to fill this annoying gap and return the stolen territory back to Canada.
The territory is made in the program Orto4XP with zoomlevel 12 (minimum available), roads and facades in the World2Xplane.
Files Packed archiver 7z (compared with zip archive size is less than 30%), you can download it from the website https://www.7-zip.org/.
The installation is standard, the entire archive must be unpacked in ...X-Plane 11\Custom Scenery.
The archive also added the folder "world-models" necessary for the World2Xplane.
The full size of the unpacked script is ~ 60GB. Put all or only the surrounding area to the airport to save disk space you decide.
Since the file size is too large, it is laid out on a third-party resource.
Enjoy my humble work.
Necessary clarification: use default airports, not change them I made only mesh and orthophoto.
769 downloads
-
.thumb.jpg.aabd60af136123988483743d611b6944.jpg)
EDNX Schleissheim
By Lopo44
EDNX Schleissheim is located about 13 miles southwest of Munich Airport.
Since I know well the special airfield Schleissheim, I wanted to create it for X-Plane using a lot of self-made photos.I had to create a lot of objects for the first time. A few
converted objects come from Sketchup's 3D Warehouse. A big thankyou to the creators of these objects.
Especially worth mentioning are the historic Junkers hangars of the Ikarus-Fliegerclub, the 3 castles, Maximilianhof, Herzogshof, the old Flugwerft (historic hangar), the old tower
with the youth meeting place and the 3 beer gardens. The helicopter location of the Federal Police (EDMX), a new addition for helicopter friends, is of interest.
There are readme-files in English and in German in the folder EDNX_Schleissheim.
In any case, read the file completely, because there are many important hints, e.g. what else I recommend regarding Ortho4xp.
I have used the following libraries for the correct function of the scenery:
- X-Europe-2-scenery v.2.1.1 from simHeaven.com
- X-Europe-3-network v.2.1.1 from simHeaven.com
- OpensceneryX v.3.2.0
- MisterX_Library_v1.61
- 3D_people_library v3.9
- CDB Library v2.5
- European Vehicles
- Naps_Lips
- The_Handy_Objects_Library v.6.8
- BS2001 Objects Library
- JB_Library
- RescueX
- RA_Library
- RD_Library v1.3
- pm_Library v2.7
- ruscenery v2.1.7
- gt_Library
- world models
Installation:
Unzip the file and drag the folder into the Custom Scenery folder of your X-Plane.
Credits:
Thanks to the following developers for providing their freeware objects:
Günther Kremp for the New Castle Schleissheim
Chimo (Glider Winch on Trailer)
Christian Gruber for the Maypole
Peter Springborn and Dirk Hillebold from rotorsim for the different helicopter EC135 models (static and hovering)
Golf1502 for the static Transall
Have fun!
Lopo44
1,006 downloads
-
DAMASCUS AIRPORT/SYRIA SIM/ORTHO
By bulb315
HI all,
I have created and converted SYRIA-SIMS Damascus airport.
I had to wait a long time till i got a response from them.
This is by far the longest and hardest scenery I have ever made because this airport didn't have an apt.dat file and i got so many errors in wed(1 month).
love to see people fly to this airport. Syria-sim have made very accurate buildings and nice ortho around the area.
Only a few airlines operate in this airport. Syrian airlines, Cham wings, Fly Baghdad, Al Nasser, Iraqi Airways and a few Iranian airlines operate here such as mahan air (governmental).
I hope one day Syria will be as normal.
Have a good flight!
libraries needed:
Fruitstand
CDB
FAIB
OpensceneryX
gt_library
ruScenery,
The Handy objects library
RE_Library
3D people library
MisterX Library
THE-FRUIT-STAND Aircraft Library
BS2001
NAPS
RA
R2
AUTOGATE
gt-libary
ff-libary
ff-lod
rd
IF you liked it please leave a review.
1,428 downloads
-
O86 - Trinity Center Airport
By Geraldar98
O86 Trinity Center Airport_v2.0.0 (19 May 2019)
California - USA.
Updated my old first version with new library updated tools available till 19 May 2019 in combination with WorldEditor 2.0.0.r4 (WED).
Download this file: O86 Trinity Center Airport_v2.zip and copy/paste it in your custom scenery directory.
(If you have my old version 1, please delete the old version from your custom scenery directory first.)
The ramp and taxiways are now more detailed with PBR overlays from Mister X. Most of the old trees replaced with more detailed FLyAgi vegetation.
Better grass and shrubs from FlyAgi, RA Library and from PuF_Libs.
The rocks and gravel are from RA-Library.
Required Libraries:
Openscenery X 3d People Library FF-Library_extended LOD FF-Library Ruscenery CDB-Library Ground Services TW NAPS Library R2-Library RE-Library JB-Hangars JB-Houses Vehicle Library Extension For the New version v.2.0.0 also needed:
Mister X library RA-Library PuF Libs FlyAgi_vegetation So if you miss some details or files, please download the libraries.
A good starting point is over here (it is an old forum subject but it will put you in the right directions):
Not included the Ortho4xp, but I recommend you to do that. (you can create and download it via tools like Ortho4XP_v120.)
One detail: I switched off in Xplane the follow terrain, because for me it created a small not natural bump in the runway.
Have fun with it and remember we all like flying with Xplane as real as possible and therefor we all spent our private time for creating more detailed airports for FREE and sharing it. So if something is not working well for you, be respectful to others as well. We all are doing our best. 🙂
I am not always checking reactions, but I will try when possible.
Check out also my recently created airport KDEQ:
Information from my old version 1.0 which is still available via scenery search:
For Xplane 11 and created with WED & photoscenery at 15 Dec 2017.
I prefer to create as realistic as possible airports, by using a photo overlay and try yo place the right objects on the right place. Although I put also some own ideas in the scenery to make it more interesting. For example this airport doesn't have appron lights, so I included it.
To get a nice surrounding I used G2XPL photoscenery, but is not included. Also in my screenshots is Photoscenery (g2XPL) switched off.
I use a lot Libraries which I downloaded from Xplane.org and by searching on internet.
Just to make sure that you have everything, below is the list.
Required:
Openscenery X 3d People Library FF-Library_extended LOD FF-Library Ruscenery CDB-Library Ground Services TW NAPS Library R2-Library RE-Library JB-Hangars JB-Houses Vehicle Library Extension Have fun and please feel free to update it or create AI-traffic..
Note: more small airports for North California are coming soon.. (for example, almost ready airport: 2O1 - Quincy Gasner Field.)
460 downloads
- california
- xplane11
- (and 1 more)
-
Pista Jaramillo, Quevedo (SEJL) - Ecuador
By Sandro Rota
Pista Jaramillo is a private airstrip located outside Quevedo, Los Ríos Province, Ecuador. It is located 1.2 NM E from Quevedo's Río Cenepa Airport (SEQE). This airstrip is the base for AgroAéreo, a cropdusting company. This airstrip is home to 7 crop dusters and is located on kilometer marker 5 on the Quevedo - Valencia road (E30).
Nearby you can find other airstrips such as El Guayabo (SEEG), Ana María (SEAN), scenery packages which will be available for download soon.
This paved runway is 670 meters long. However, due to the nearby edifications and vegetation, landings can only be done on runway 02, and takeoffs from runway 20. There are no visual aids or navaids.
Beware: A dirt road crosses the runway, and you can expect locals to cross it by foot, bike or with vehicles.
Real airstrip coordinates: S 0° 59' 12.0292", W 79° 26' 38.7331"
ICAO CODE: SEJL
ELEVATION: 151 FT
FREQUENCY: SEGU FIR 128.30.
TO INSTALL:
Unzip the file and drag the folder into the Custom Scenery folder of your X-Plane.
LIBRARIES REQUIRED:
CDB-Library
OpenSceneryX
FlyAgi_Vegetation
MisterX Library
NAPS_Library
The_Handy_Objects_Library
PPLibrary
PM (Paulmort) Library
RescueX_Library
3D_people_library
Special thanks: Sir Hofma whose photos are published here to show the real airport.
Developed by Sandro Rota - Ecuador Aviation Photography.
www.ecuavphoto.net - [email protected]
120 downloads
(0 reviews)0 comments
Submitted
-
X-Life Traffic FACT (Cape Town International Airport)
By Guest
X-Life FACT (Cape Town International Airport) V1.0
FACT (Cape Town International Airport) also know as the Mother City is located in the Southern Africa Region, it is an international and domestic hub for passengers as well as cargo. This add-on provides traffic for the X-Life plugin. The custom scenery airport was downloaded from X-plane Gateway Scenery portal and edited in WED to remove static aircraft for a more realistic traffic flow.
INSTALLATION
1. The traffic add-on will require the use of X-Life which can be downloaded for free from this website http://jardesign.org/x-life/www/
2. Unzip contents of FACT.ZIP to your desktop
3. Copy the provided FACT_SCENERY_PACK to your X-Plane 11/Custom Scenery folder
5. Copy the file FACT.xlf into the x-plane 11/Resources/Plugins/X-Life/Airports folder
6. You will also require the latest BLUEBELL XP Models located here http://jardesign.org/forum/viewtopic.php?id=2032
7. For installation of BLUEBELL XP please follow the guidelines on the above link and ensure it's done correctly (If you having issues please let me know and I'll include detailed installation instructions or a video tutorial thereof)
8. Launch X-Plane 11 Start X-Life traffic plugin
9. Enjoy!
Please advise me if there are any problems.
274 downloads
(0 reviews)0 comments
Submitted
-
Aeroclub Batan
By Ghwei
//English / Inglés
Aeroclub Batan (SA4H/MDB) located in the west of Astor Piazolla Airport (SAZM,Mar del Plata), province of Buenos Aires, Argentina. I appreciate an advice or criticism to continue growing in the development of sceneries.
*Objects by: Enrique Faré
Enjoy!
//Spanish / Español
Aeroclub Batan (SA4H/MDB) ubicado en el oeste del Aeropuerto Astor Piazolla (SAZM, Mar del Plata), provincia de Buenos Aires, Argentina. Agradezco un consejo o critica para seguir creciendo en el desarrollo de escenarios.
Objetos de: Enrique Faré
Disfrutenlo!
302 downloads
-
VABB Mumbai Chhatrapati Shivaji Int'l
NOTICE: Now I have very little time to update the scenery pack (thanks, online class), so anyone who wants to use it as a base for their own is completely free to do so, except that, of course, reasonable credit must be provided first.
-LuftHANSa 755, December 2020
Chhatrapati Shivaji Maharaj International Airport, Mumbai (IATA: BOM, ICAO: VABB), formerly known as Sahar International Airport, is the primary international airport serving the Mumbai Metropolitan Area, India. It is the second busiest airport in the country in terms of total and international passenger traffic after Delhi, and was the 14th busiest airport in Asia and 28th busiest airport in the world by passenger traffic in calendar year 2017.Its passenger traffic was about 49.8 million in year 2018. The airport is the second busiest in the country in terms of cargo traffic as well. In March 2017, the airport overtook London Gatwick Airport as the world's busiest airport with only one operational runway at a time. The airport has three operating terminals spread over a total land area of 750 hectares (1,850 acres) and handles about 950 aircraft movements per day. [Source: Wikipedia]
It is the 12th and biggest ever airport I have made for the X-Plane community.
Libraries required-
1: Aircraft- Static and Animated for Jeff Mueller's payware KJFK and KLAX
2: ALES Developer Library
3: Backup Scenery Library
4: BS2001 Object Library
5: CDB Library (V1.7+)
6: FJS Scenery Library
7: Flags_of_the_world
8: Flyby Planes Library
9: GT_Library
10: JB Library
11: MisterX Library
12: OpenSceneryX
13: PP Library
14: R2 Library
15: RA Library
16: RD Library
17: RUScenery Library
18: SAM Library
19: The FAIB Aircraft Library
20: The Fruitstand Aircraft Library
21: The Handy Objects Library
Libraries can be found here:
HIGHLY RECOMMENDED: 1: Reshade by crosire
2: Airport Environment HD
RECOMMENDED: 1: VAJJ Juhu
CREDITS- AbhishekB for many of the ground handling bits, like buses and stairs. Without him, the airport would not look very realistic.
- InFInItyKiLL33 for the library.txt (adapted from his WSSS scenery)
- BCB Aviator for the SAM fixes.
INSTALLATION-
1: Move the folder, "VABB Mumbai International (4.0)" into X-Plane 11>Custom Scenery.
KNOWN ISSUES-
1: A few objects are missing. This is because the NAPS library has gone from x-plane.org and until it's merged with OpenSceneryX, the objects will be place-held by Laminar facades.
2: The Ortho4XP is missing. I'm working on it, it'll be out soon!
8,969 downloads
-
surat Surat International Airport, India (VASU)
By AbhishekB
Surat International Airport (IATA: STV, ICAO: VASU) is an international airport located in Magdalla, Surat in the western Indian state of Gujarat with a total area of 770 acres (312 ha). It is the second busiest airport in Gujarat after Ahmedabad in terms of both aircraft movements and passenger traffic.It was awarded the custom-notified status on 9 June 2018. The airport has nonstop international service to Sharjah and nonstop service to major Indian cities. It is also home to a flying training school.
Requirements:
Libraries required:
1: RE Library
2: CDB_Library
3: SAM Gate
4: XAirportScenery
5: MisterX_Library
6: RD_Library
7: OpenSceneryX
8. Airport HD
please check all updated once.
Optional: If possible then try to make ortho4XP VASU.
Installation:
Just copy the folder into your XPlane11/CustomScenery folder.
Thanks:
I use Sarvesh Asopa Xplane scenery & modified it following things:
1) Ground Textures 2) Ramp Gate 3) Night Lights 4) Airport boundary wall 5) Adding 1 more parking stand 6) Gate number on ground. 7) All gates SAM time pole.
Thanks to Sarvesh Asopa & we use terminal (from FSX converted scenery. )
"Happy to fly in India & happy landing."
349 downloads
-
Quevedo Río Cenepa (SEQE) - Ecuador
By Sandro Rota
The Río Cenepa Airport is a military base located in the city of Quevedo, province of Los Ríos, Ecuador. It is located 74 NM NE from Guayaquil's José Joaquín de Olmedo Airport (SEGU).
Though this airport is used by the Ecuadorian Army Aviation corps (Aviación del Ejército Ecuatoriano), civilian aircraft are authorized to fly to and from this airport. The runway paved with a length of 1500 meters, with no navaids or illumination. Nearby there are other airfields and landing strips used by nearby banana farms.
A few years ago, an Army DHC-5 Buffalo (AEE-501) had an incident in this airport and has been left on the platform ever since.
Real airstrip coordinates: 00º 59' 24'' S, 79º 27' 56'' W
ICAO CODE: SEQE
ELEVATION: 246 FT
FREQUENCY: SEGU FIR 128.30.
TO INSTALL:
Unzip the file and drag the folder into the Custom Scenery folder of your X-Plane.
LIBRARIES REQUIRED:
CDB-Library
FlyAgi_Vegetation
OpenSceneryX
The_Handy_Objects_Library
MisterX Library
NAPS Library
RescueX Library
PM (Paulmort) Library
R2_Library
Flags of the world
Fruitstand Library
Special thanks: Sir Hofma whose photos are published here to show the real airport.
Developed by Sandro Rota - Ecuador Aviation Photography.
www.ecuavphoto.net - [email protected]
103 downloads
(0 reviews)0 comments
Submitted