Scenery Packages
11,436 files
-
.thumb.png.39fb8cb3daf075839de883e869f0c4ee.png)
SKYP-EYP, EL ALCARAVAN, XPLANE
By camilorpl
AUTOGATE NECESSARY TO BETTER EXPERIENCE:
I RECOMMEND YOU TO DOWNLOAD ALL POSSIBLES MASTER LIBRARIES:
237 downloads
(0 reviews)0 comments
Updated
-
7S0 Ronan Montana
By Mr. Dare
At 4798 feet in length, 7S0 Ronan is the longest paved runway on the Flathead Native American Reservation,. It is located 3 miles North of the Town of Ronan, and is about 10 miles South East of 8S1 Polson. 7S0 Ronan is Primarily a general aviation airport serving the towns of Ronan and Pablo. It will be of special interest to aerial firefighters, as it is also the home to the Division of Fire Management Headquarters. This division of the Confederated Salish and Kootenai Tribal Foresty Department is responsible for coordinating all firefighting activities with outside agencies on the tribal lands. There are two marked helipads, as well as other support for aerial firefighting aircraft.
7S0 Ronan is an un-towered airport, with 24 hour self service fuel (100LL and JetA). All onsite facilities are represented as accurately as possible using available library assets. I have also tried to create a good representation of the surrounding area in the landing pattern and approaches based on actual land use as closely as possible.
If you are using the standard mesh, or fly with "runways flattened" you may want to delete the hedges I placed around some of the buildings farther back in the hangar area. With the UHD Mesh from AlpilotX there were some "floating buildings" due to terrain that I was able to camofoliage with objects and hedges, but if you don't have any floaters back there, things will look better without them. They can be easily located and removed with Overlay Editor if desired. Getting it to look good with the UHD mesh was pretty difficult, so I am leaving the modifications in for now.
This file was created in X-Plane v10.51, but it should work fine in v-11 as well.
This file requires the following Librarys to display properly:
3D People Library
BS 2001 Library
CDB Library
FJS Library
Handy Objects Library
JB Library
ff Library
flags of the USA Library
Mr X Library
NAPS Library
Open X Library
PM Library
RD Library
RE Library
ruscenery Library
Xprefab Library
As well as the World Models Librarys for W2XP
Thanks to all of these library creators for the wide selection of objects they have made available to improve scenery projects, their efforts play a large part in making this scenery possible.
155 downloads
-
Yuma International Airport
By Skylark2992
Yuma (KNYL) for X-Plane 10 (and possibly for X-Plane 11) - Skylark2992 (01/05/18)
Hello, and welcome to Yuma (KNYL). Yuma International Airport is a joint use airport with civilian and military flight activity operated in conjunction with the U.S. Marine Corps via the Marine Corps Air Station Yuma. You can find out more about Yuma here: https://www.yumaairport.com/yumahome.nsf Yuma is located in south-west Arizona, USA, and is approximately 140nm south-west of Phoenix (KPHX) and approximately 10nm north and east of the border with Mexico. Yuma also home to Million Air's Flight Base Operations (FBO), an interesting mural wall and a large array of solar panels.
I decided to convert an FSX airport originally created by Sheryar (Shez), who kindly gave me permission to convert and to upload a reworked version of his FSX airport for X-Plane. I chose Yuma also because about 18 months ago, just before I embarked on a pretty big life-changing event, I had the pleasure to do some flying with a fantastic pilot who completed some of his flight training out in Yuma. I like to think that our paths shall cross again, but in the mean time there is Yuma and X-Plane with which to reminisce.
I have tested this scenery with X-Plane 10 v1.51rc2 (64-bit); however, if it does work for X-Plane 11 then please do let me know so I can update this description. Shez's permission is available on request - please feel free to ask me if in doubt, I won't be offended. Airport charts are included too. The RWY21 ILS and GS details are included in the scenery folder in case you need to add or to edit them, but they should be present in X-Plane 10 by default.
This airport is a simple rework and is lacking traffic routes and some ground markings plus any ground traffic due to skill and time limitations on my part. Please feel free to edit this airport but if you do, please send me the modifications so I can upload them to respect Shez's original work - you will of course be credited fully, as will Shez for his original work. At this time (May 2018), this scenery is designed to work with Ortho4XP orthos (https://forums.x-plane.org/index.php?/files/file/29120-ortho4xp) using Arc ZL16 (other sources may work equally well or even better).
You can find my other sceneries here: https://forums.x-plane.org/index.php?/profile/248513-skylark2992/&do=content&type=downloads_file&change_section=1
Installation instructions
1) First, download and install the following libraries which are also listed in the Master Library list here: https://forums.x-plane.org/index.php?/forums/topic/90776-master-list-of-libraries/
CDB library (where would we be without this one?!): https://forums.x-plane.org/index.php?/files/file/27907-cdb-library PM library (another gem): https://forums.x-plane.org/index.php?/files/file/29185-pm_library-objects-for-scenery 3D people library (courtesy of the late dkm, whose work has greatly enhanced countless sceneries): https://forums.x-plane.org/index.php?/files/file/26611-3d-people-library People library: http://www.x-plane.at/drupal/node/191 Ru scenery library (click the link where it says '2.1.6. RuScenery.zip (253 MB).'): http://ruscenery.x-air.ru/ RD library (click text saying 'DOWNLOAD'): http://rdesignx.weebly.com/freeware.html Handy objects library: https://forums.x-plane.org/index.php?/files/file/24261-the-handy-objects-library/ MisterX library: https://forums.x-plane.org/index.php?/files/file/28167-misterx-library-and-static-aircraft-extension/ Madagascar library - download 'Madagascar Bush Airfields 1.1.0 (28.1 MB)'; you can remove the airfields themselves but I recommend keeping them as they're so good: http://shadetreemicro.com/index.php/scenery/madagascar NAPS library: https://forums.x-plane.org/index.php?/files/file/30478-naps-library/ BS2001 library: https://forums.x-plane.org/index.php?/files/file/28045-bs2001-object-library/ FAIB aircraft library: https://forums.x-plane.org/index.php?/files/file/29079-the-faib-aircraft-library/ FJS library: https://forums.x-plane.org/index.php?/files/file/28594-fjs_scenery_library/ JB library (you'll need all 3x types: hangars; houses; and objects): https://forums.x-plane.org/index.php?/files/file/26531-jb_libraryzip/ OpenSceneryX (download Mac, Linux or Windows according to your system): https://www.opensceneryx.com/ Sea Life library: https://forums.x-plane.org/index.php?/files/file/28296-sea-life-library/ XAirportScenery library: https://forums.x-plane.org/index.php?/files/file/17534-xairportscenery/
2) Download the scenery and unzip its resulting folder to your X-Plane\Custom scenery folder.
3) Follow the instructions in the included readme file for ortho instructions.
Feedback, comments or questions?
Please do let me know via the forum whether I can improve anything, or if you have any questions. You can reach me via PM or in the comments section of this scenery on the forum. I'm always open to suggestions, comments and constructive criticisms.
Good flights captains!
- Skylark2992
534 downloads
-
TQPF
By nut-nut
I have added a ton of objects that really bring the scene to life. Also created from photos as well as Ortho overlays for guidance TQPF. This is four of a set of four island airports I am uploading. Objects are mostly from the Laminar library but there are some from MisterX so make sure you download his library. If you like this airport add a like and feel free to come by my streaming channel at https://www.twitch.tv/dayzing and let me know what you think. These are for xplane11.
MisterX6 library and 3D people library are needed.
I intentionally left out screenshots because I wanted everyone to discover the little things i put into them.
If you fly in the Antilles... get all four SABA, TFFG, TQPF, and TNCE. They are all close to one another and go very well together.
578 downloads
-
TNCE
By nut-nut
I have added a ton of objects that really bring the scene to life. Also created from photos as well as Ortho overlays for guidance TNCE. This is three of a set of four island airports I am uploading. Objects are mostly from the Laminar library but there are some from MisterX so make sure you download his library. If you like this airport add a like and feel free to come by my streaming channel at https://www.twitch.tv/dayzing and let me know what you think. These are for xplane11.
MisterX6 library and 3D people library are needed.
I intentionally left out screenshots because I wanted everyone to discover the little things i put into them.
If you fly in the Antilles... get all four SABA, TFFG, TQPF, and TNCE. They are all close to one another and go very well together.
539 downloads
-
TFFG
By nut-nut
I have added a ton of objects that really bring the scene to life. Also created from photos as well as Ortho overlays for guidance TFFG. This is two of a set of four island airports I am uploading. Objects are mostly from the Laminar library but there are some from MisterX so make sure you download his library. If you like this airport add a like and feel free to come by my streaming channel at https://www.twitch.tv/dayzing and let me know what you think. These are for xplane11.
MisterX6 library and 3D people library are needed.
I intentionally left out screenshots because I wanted everyone to discover the little things i put into them.
If you fly in the Antilles... get all four SABA, TFFG, TQPF, and TNCE. They are all close to one another and go very well together.
541 downloads
-
SABA
By nut-nut
Corrected position for SABA while utilizing Altpilots HD mesh v4. Shortened the runway to match photoreal size. I have added a ton of objects that really bring the scene to life. Also created from photos as well as Ortho overlays for guidance. This is one in a set of four island airports I am uploading. Objects are mostly from the Laminar library but there are some from MisterX so make sure you download his library. The tower is not accurate but it is close in size. If you like this airport add a like and feel free to come by my streaming channel at https://www.twitch.tv/dayzing and let me know what you think. These are for xplane11.
MisterX6 library and 3D people library are needed.
I intentionally left out screenshots because I wanted everyone to discover the little things i put into them.
If you fly in the Antilles... get all four SABA, TFFG, TQPF, and TNCE. They are all close to one another and go very well together.
mySABA.7z
1,548 downloads
-
LEAB Albacete
By Eminemgod
La Base Aérea de Los Llanos o Base Aérea de Albacete (código IATA: ABC, código OACI: LEAB) es una base aérea internacional del Ejército del Aire de España que se encuentra situada 4 km al sur de la ciudad española de Albacete.1 Desde el 1 de julio del año 2003 comparte pista y algunas instalaciones con el Aeropuerto de Albacete, operado por Aeropuertos Españoles y Navegación Aérea (AENA).2
Es una de las instalaciones aéreas más importantes de España.3 Depende operativa y orgánicamente del Mando Aéreo de Combate (MACOM).4 En ella se encuentra desplegada el Ala 14, que concentra en dos escuadrones —designados 141 y 142— los Eurofighter Typhoon, uno de los aviones de combate más avanzados del mundo, entre otros.56
Junto a ella se encuentra la Maestranza Aérea de Albacete (MAESAL),7 en la se realizan las revisiones, reparaciones y modificaciones que requieren los aviones desplegados en la base como los Eurofighter Typhoon, los CASA C-101 Aviojet de entrenamiento o los Canadair CL-215 dedicados a la extinción de incendios.89
La Base Aérea de los Llanos es también la sede del TLP (Tactical Leadership Programme), la escuela de excelencia para pilotos y tripulaciones considerada el Top Gun de Europa.6
Además, muy cerca de la misma se sitúa el Centro Nacional de Adiestramiento de Chinchilla, con el que mantiene actividades conjuntas.
The Air Base of Los Llanos or Albacete Air Base (IATA code: ABC, ICAO code: LEAB) is an international air base of the Spanish Air Force that is located 4 km south of the Spanish city of Albacete.1 Since July 1, 2003 shared track and some facilities with the Albacete Airport, operated by Spanish Airports and Air Navigation (AENA) .2
It is one of the most important air facilities in Spain.3 It depends operatively and organically on the Combat Air Command (MACOM) .4 In it, wing 14 is deployed, which concentrates on two squadrons-designated 141 and 142-the Eurofighter Typhoon, one of the most advanced combat aircraft in the world, among others.5 6
Next to it is the Aerial Maestranza de Albacete (MAESAL), 7 in which the revisions, repairs and modifications required by aircraft deployed at the base are made, such as the Eurofighter Typhoon, the CASA C-101 Aviojet training or the Canadair CL-215 dedicated to extinguishing fires.8 9
The Air Base of the Plains is also the headquarters of the TLP (Tactical Leadership Program), the school of excellence for pilots and crews considered the Top Gun in Europe.6
In addition, very close to it is the National Training Center of Chinchilla, with which it maintains joint activities.
Las librerias necesarias son:
OpenSceneryX
MisterX Library
NAPS Library
CDB Library
FJS Scenery Library
GT Library (Ground Textures Library)
BS2001 Library
HandyObjetcs,
3D People Library
RD Library
RescueX
1,685 downloads
-
GABS Modibo Keita Airport, Bamako, Mali
By Risuali
Bamako's Modibo Keita International Airport (IATA: BKO, ICAO: GABS) (formerly Bamako–Sénou International Airport) is Mali's main airport located approximately 15 kilometres (9.3 mi) south of downtown Bamako, the capital of Mali in West Africa. It is managed by Aéroports du Mali (ADM).[1] Its operations are overseen by the Malian Ministry of Equipment and Transport
Features
Detailed and accurate scenery for GABS as of January 2018
Custom ground textures for taxiways and runways
Custom moving Jetways(Autogate)
Photoscenery for the airport area
Accurate HDR night lighting
HDR taxiway signs
Animated XP11 ground traffic
Requirements
Xplane 11.11+
Autogate plugin
CDB-Library
MisterX_Library
RE_Library
World models library
Installation
Afer downloading and Unzipping you will find Two folders(GABS Bamako Senou and Variations)
GABS Bamako Senou contains the scenery in its entirerty
For those who don't want Static aircrafts or the Ortho Open the variation folder and copy the Earth Nav Data contents to your GABS Bamako Senou folder.
Then move the GABS Bamako Senou to your custom scenery folder .That's all
Credits
MisterX6
Axmiha
ISDG team
IXPT team
CDG
Marginal
Zlin142
Flightworld
2,114 downloads
-
O08 Colusa County
By M9 Aviation
O08 - Colusa County, Located in central California, just NW of Sacramento.
SkyVector link: https://skyvector.com/airport/O08/Colusa-County-Airport
Another custom scenery pack by M9 Aviation. Airport and attached industrial park are modeled according to (and including) the underlying ortho depiction.
Custom FBO (Fixed Based Operator) building for PAK Air Charters, an FSEconomy flight group.
Ramp has been modified from actual to accommodate the custom FBO building, and VASI added to aid in landings.
This scenery does use 3rd party objects, all are included in the package EXCEPT for OpenSceneryX. You will need to separately install OpenSceneryX before using this pack.
As always, feel free to leave comments or message me with any bugs or problems loading/using this scenery pack! If you like the scenery, please consider leaving a positive review and follow me for more work.
218 downloads
- pak
- m9 aviation
- (and 1 more)
(2 reviews)0 comments
Submitted
-
ULSG - Gostilitsy Airfield, St Petersburg, Russia.
By ErmakDimon
Gostilitsy Airfield (УЛСГ/ULSG) is the biggest GA Airfield in Northwest Russia. It's located just south of St. Petersburg and serves multiple air clubs, housing over 100 aircrafts.
This is my rendition of the airfield with library objects and compatible with XP11. (Orthophotos not included)
Please note that I have no WED experience and made it from my own photos, memory and low quality orthophotos. However, the default XP11 scenery is completely in 2d, missing 2 aprons and multiple parkings, so I decided to make this. I hope you enjoy it.
Libraries list:
http://shadetreemicro.com/index.php/scenery/madagascar
http://ruscenery.x-air.ru/
https://flyagi.de/viewtopic.php?f=4&t=3
588 downloads
(1 review)0 comments
Updated
-
EDWR Borkum
By LPNils
Borkum, Lower Saxony, Germany
A basic rendition of the beautiful German airfield of Borkum, just north of Groningen province, the Netherlands. Ideal for a quick hop from Emden, Norden or Oostwold.
Or start your trip from Texel and hop your way over via Ameland. The chain of islands on the North Sea coast line leads all the way up to Denmark, with a small pause at Cuxhaven.
Wikipedia description:
Viel Spaß!
Requires the following libraries:
OpenSceneryX BS2001 XAirport Scenery RD_Library FF Library JB Library PM Library Handy Objects Library R2 Library MisterX Library Ru_Scenery 3D People Library World Models?
If you do not have these libraries installed, or if they have not been updated in a while, take a look here (click). Included obj:
EC135 at hospital by Jens Strohmeyer/Dirk Hillebold Modified Underlay:
Bing Aerial779 downloads
-
Canada_SK_CYYO
By prospero246
Wynyard/W. B. Needham Field Aerodrome, (IATA: None, ICAO: CYYO), also known as Wynyard Memorial Airport, is located 2.2 nautical miles (4.1 km; 2.5 mi) north of Wynyard, Saskatchewan, Canada Wynyard is a town in eastern Saskatchewan, Canada, 132 km west of Yorkton and 190 km east of Saskatoon. Wynyard is in but not part of the rural municipality of Big Quill No. 308. It is located on the Yellowhead Highway just south of Big Quill Lake. Reference:
Wikipedia 2018
Personal comments: Not to be mistaken with another airport of similar name in Tasmania, Wynyard airport is a very humble affair. I was considering giving it a pass as there is hardly much to model except 4 structures to which time might not have been very kind, if I can judge from the fuzzy Google map satellite picture. However, this airport does stand right besides two large lakes called the Quill Lakes. "Quill Lakes is one of the key breeding ground areas for North American populations of waterfowl and other migratory birds and shorebirds. The area is a major shorebird staging area in the spring and fall with numbers ranging from 60 000 to 155 000 birds." according to this article. There are a number of similar small airfields in this region
Wadena Airport (CKS7)
Quill Lake Airport (CKE2)
Kelvington Airport (CKV2)
Lanigan Airport (CKC6)
Naicam Airport (CJR9)
Humboldt Airport (CJU4)
Watrous Airport (CKU7)
Ituna Airport (CJM2)
Imperial Airport (CKU5) Unfortunately these seem to be destined to remain simply hard to find (from the air) grass and dirt strips in X-Plane because in reality that is what most are. Unless there is a demand for any of these, I may pass them by as well. Wynyard airport is at an elevation of 1,746 ft / 532 m and the single asphalt runway , 09/27 is just over 3000 ft, 915 m. There are several modelled airports in this region, including, Corman air Park, CJN5 on the outskirts of Saskatoon, Yorkton, CYQV to the SE and close to the Manitoba border, Rosetown, CJX4 about 260 km due west and a few others in the Saskatchewan series. I would suggest flying NW to CJN5 and into more interesting terrain to North Battleford, CYQW for a lovely afternoon flight in the Canadian prairies. In a separate download you will find FMS flight plans to some other airports in the Saskatchewan series, all originating from this airport. Put these plans in your X-Plane 11\Output\FMS plans folder. Enjoy your flight. Installation: Put unzipped folder, Canada_SK_CYYO in X-Plane, Custom Scenery folder. Restart X-Plane. If scenery does not show up, make sure that it is above Global airports and any Mesh Scenery you may be using, in the scenery_packs.ini file. Remember to disable other sceneries of the same airport, if you have any. If the scenery does not look like the pictures, then you must have picked up another scenery in your Custom Scenery folder. If you receive any error messages during loading, please update X-Plane to the latest version. Do not be misled by the tiny size (Less than 30 kb)of the file. This is a LEGO-BRICK scenery and uses the megabytes of art assets already included in your installation of X-Plane. It will compare favourably, at times better, to other (much larger sized) sceneries of this area and will probably exceed your expectations. I believe that in order to enjoy a flight simulator you shouldn’t need to fill up your computer with gigabytes of data or rely on many third party libraries unless of course you fly exclusively in one small area. Important Note: Even though there is no tower at this airport and all traffic is CTAF (Common traffic advisory frequency), I did put in a tower in order to animate AI aircraft. Without it there would be no traffic. In all other details and placement of buildings etc. I have tried to keep this as realistic as possible, artistic license notwithstanding. Note: The version I have submitted for future releases of X-Plane on the Gateway site will only have CTAF frequency but in all other respects, the scenery is identical. I am trying to recreate smaller, often neglected Canadian airports that do not get much TLC in X-Plane (or in any other flight Simulations). I like to be as realistic as possible with the limited library I work with. I do not have the tools to recreate the details that make an airport look as it looks in "real life", for example, the discarded fast food container stuck in the fence; the puddle of oil; the crack in a hut window; the bald patches of grass and a myriad other details that you would see in real life. The photos I download and the satellite maps I use as reference are not always up to date and even if I wanted to painstakingly recreate every actual structure, this is impossible to do with the library I use and still keeping it a LEGO_BRICK airport which I want to do so that it is included in future releases of X-Plane. Therefore, in order to keep my airports as appealing and interesting as possible, I do include trees, where no trees may be at the moment; the odd store and gas station or fuel supply.
Of course, it takes away a little from reality but (strangely enough), this actually adds to the realism in a scenery. Equally Important Please take the time to rate and leave a short comment or constructive criticism so that I'd know I am on the right track with these sceneries. I understand that one normally doesn't return to the download page after you've installed the scenery but try anyway. Comments do motivate scenery designers! Also please report any bugs or problems you come across while using this particular scenery.
Thank You and Enjoy the scenery! MSF ( Doctors Without Borders/Médecins Sans Frontières) Like yourself, this organization flies all over the world and they do tremendously good work. If you like this scenery, please consider giving a small donation to MSF.133 downloads
- wynyard
- saskatchewan
- (and 1 more)
(1 review)0 comments
Submitted
-
RedBull AirRace Cannes 2018 Track
Hey ! This is the reproduction of the Redbull Air Race of Cannes 2018.
I'm a fan, and I reproduced the scenery with the real coordinates. Below the text, you can see that these are the real world coordinates of the race,
I e-mailed the support and they answered me the coordinates. They are so helpful, I love RedBull
How to install it?
It's very simple, look at the readme
Credits :
Franck C.
Raphael G.
Redbull
Say thanks to
502 downloads
-
Uzbekistan-TurmenistanPak Ground Traffic
Uzbekistan-TurmenistanPak - Ground Traffic
Go to Scenery->Asia
This is a collection of Ground Traffic packages for locations in the Uzbekistan-TurkmenistanPak using GroundTraffic animated ground vehicle traffic kit by Marginal.
No plug-in required.
Information
This download provides ground traffic for…
UTNN NUKUS UTSB BUKHARA UTSS SAMARKAND UTTT Tashkent UTSK Karshi UTAA Ashgabat UTAK Turkmenbashi UTAM Mary UTAT Dashoguz UTNU Urgench UTST Termez Requirements
Uzbekistan-TurkmenistanPak
OpenSceneryX
ruscenery
How to Install
Copy all of the folders in this download to the Custom Scenery Folder of X-Plane.
158 downloads
(0 reviews)0 comments
Submitted
-
Uzbekistan-TurkmenistanPak
Uzbekistan-TurkmenistanPak
Go to Scenery->Asia
Information
This pak includes:
UT1A ISFARA UT1B MOSKOVSKIY PYANDZH UT1G ASHKHABAD BEZMEIN UT1H Balkanabat UTNN NUKUS UT1M KAKAYDY UT1O BELEULI NORTH UT1P KAGAN SOUTH UT1Q PAKHTAKOR UT1R MUYNAK UTSB BUKHARA UTSS SAMARKAND UTTT Tashkent TM0I Bekdash UTSU Uchkuduk UTSK Karshi UT73 Maymanak UTNT Turtkul UT1E Pitnyak UT1F Yangadzha UT1J Cheleken East UT50 Serakhs Southeast UT52 Mary North UT55 Kizyl Arvat UT56 Gaurdak UT58 Kalai Mor UTA4 Gyaurs Agri UTA6 Kelyata UTA9 Kiyzyl Atrek UTAA Ashgabat UTAE Kerki UTAK Turkmenbashi UTSL Karshi Khanabad UTAM Mary UTAN Dzhebel UTAT Dashoguz UTAV Turkmenabat UTNU Urgench UTST Termez Z14H Sarakhs South
Requirements
AutoGate plugin 1.72
THE-FRUIT-STAND Aircraft Library
OpenSceneryX
ruscenery
Credits
Marginal - AutoGate plugin and Gate objects.
Barry Roberts - Custom scenery objects
2,021 downloads
- scenery
- turkmenistan
- (and 1 more)
-
a_Downtown Duluth.zip
By tbonepiano77
This scenery pack contains the aerial lift bridge and Ward Wells Field House in Duluth, MN. I will soon have updates with more buildings in downtown Duluth and UMD. The canal park area looks a little better with ortho4xp installed, which I can't include because of copyright, but the scenery will work without it, especially at night. If you have the knowhow and the hard drive space you can use ortho4xp from this site. And I noticed x plane 11 version of the canal is even worse than x plane 10, so I highly recommend ortho4xp or something better than default.
310 downloads
-
LOWG_Graz
By fsclips
This scenery will install LOWG - Graz Airport.
Graz is located in southern Austria (Styria) and its airport sees regular traffic from airlines like easyjet, Lufthansa, Austrian Airlines,
KLM, Turkish Airlines plus a number of charter airlines.
The real airport has a very unique looking terminal building which is hard to replicate with library objects, but I hope
this is a good enough imitation that will give you a good idea of what it looks like.
Built and tested in X-Plane-11.11!
To Install simply unzip the downloaded file and copy and paste it into .../X-plane 11/Custom Scenery
Required:
- Mister X library
- GT library (ground textures)
- Openscenery X
- Autogate plugin (there are no gates, but I have placed Marshallers that will guide you in)
Enjoy! :-)
2,114 downloads
-
LEMU - MUTXAMEL-MUCHAMIEL
By jugarciav
Airport: Mutxamel (LEMU) Alicante (Spain) Update/Actualizado apt 2018 Uploaded by/Creado por: Juan Garcia Authors Comments/ Comentarios Autor: Installation Instructions/ Instrucciones de instalación: Required Librarys/ Librarys Requeridas: My Library
European Vehicles Library
CDB Library
ZZZ Daimedia Library
Mister X Library
3D People Library
Ruscenery Library
Handy Objects Library
Openscenery Library
PM Library
R2 Library
NAPS Library
Rescue X Library. If you have any problem, see your log.txt. Find "LEMU" and try to find the failure. Ensure you have all the librarys updated.
Si experimenta algún problema con el escenario abra el log.txt. En la pestaña buscar ponga LEMU y trate de encontrar cual es el error. Compruebe que tiene las Librarys actualizadas.
To install this scenery, drag this entire folder into X-Plane's Custom Scenery
folder and re-start X-Plane. Para instalar el escenario descomprimalo dentro de su carpeta Custom Scenery. Arranque X-Plane. Donations/Donaciones: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=GV8SZVMFFFJFW
686 downloads
-
UNQN - Nazarovo. Project "Atmosfera".
By Alt1988
The airport was opened in 1981. It is located 7 km from the settlement of the same name. It was used for regular passenger flights to Krasnoyarsk "Severny" small and agricultural aviation.
This pack contains:
The main airport facilities, suburban areas, apron and summer orthophoto
Before installation, please read "Readme.PDF" -file
© 2018 Project "Atmosfera"
When designing the scene, the following libraries were used.
CDB - Library : https://forums.x-plane.org/index.php?/files/file/27907-cdb-library/
Handy Objects : https://forums.x-plane.org/index.php?/files/file/24261-the-handy-objects-library/
RuScenery : http://ruscenery.x-air.ru/
OpensceneryX : https://www.opensceneryx.com/
3D people library 3.9: https://forums.x-plane.org/index.php?/files/file/26611-3d-people-library/
RescueX Library : https://forums.x-plane.org/index.php?/files/file/20800-rescuex-library-the-new-scenery-package-for-helo-pilots/
About other developments that have no relation to the X-plane, placed on other resources, is written in the README
238 downloads
-
LOWS _ Salzburg Airport
By fsclips
This scenery will install LOWS - Salzburg W. A. Mozart Airport.
Salzburg Airport is the second largest airport in Austria and is located near the Austrian alps. The mountains make for a great backdrop
but also make flying in and out of the airport quite challenging.
Initially I just wanted to make some improvements to the default airport but by the time I had finished I had almost completely re-built the whole thing.
This airport is built on a slope which makes the terrain very challenging. I tried my best to deal with it. This is only my second X-Plane scenery!
Features:
- Night lighting
- Moving ground vehicles
- Marshalers at all airline gates
- Staring points with correct airline codes
Built and tested in X-Plane-11.11!
Required:
- Mister X library
- Cami De Bellis (CDB) Library
- RE_library
- Openscenery X
- Autogate plugin
Recommended:
Airport Environment HD
Installation:
To Install simply unzip the downloaded file and copy and paste it into .../X-plane 11/Custom Scenery
Enjoy!
6,266 downloads
-
NZPN Picton – NZ Stories 02
By DazaXIII
First of all, this whole project is designed around trying to make things to fit with the Lyndiman ortho. It’s good so it’s worth the effort of the download and you can find it here.
https://lyndiman.com/category/flight-simulation/
I guess making your own ortho will work too (but I don’t know) although if you just use default stuff then my airports may look a mess.
This is NZPN Picton which is on South Island in New Zealand. From the Gateway version I’ve placed some buildings of approximately the right footprint size in approximately the right place and added other stuff to make it look nice. It’s still more of an artistic licence airport rather than correct to real life but you can race a train now with a railway being next to the runway so that’s quite fun. (PS - if you haven’t got a railway running full length you might want to have a look at my included tweaks document
The NZ stories. - As well as the airport there is also a document called “The NZ Stories 02.” The story involves five airports from me which I’m going to upload in this batch. It also involves NZCH but there is already a good sceneries by others for that, details in the document. The NZ Stories are a little route with missions and a reason why you’re going to be making the trip to the airports to help bring things to life. It’s a bit of stupid fun and you might enjoy that kind of thing or you might not so it’s up to you.
This one does follow on from NZ Stories chapter 01 and make reference to it so to get the best out of all this it would be best to do chapter 01 first. If you do follow the story then it would also be better to not visit my airports first to have a look around. Let the story uncover some easter eggs for you as you go along.
Other contents - There is a small document which has info abut other tweaks I’ve done to my X Plane to make things look as they do in the photos. It’s there if you want to have a look.
Installation - Usual stuff, download, unzip, put in Custom Scenery, moan at me in the comments section if it doesn’t work.
Libraries - Seriously, just search for the master list of libraries and download the lot of them. I haven’t used all of them but by the time I finish with New Zealand I may well have done and with other people making other nice scenery it’s just useful to have everything.
Additional Libraries.
I don’t think these are part of the master list so you also need this one
https://forums.x-plane.org/index.php?/files/file/32135-world-models-library/
And this one but just the Overlay download part. I’m fairly sure you don’t need to touch the mesh part of the download if you don’t want to.
http://www.alpilotx.net/downloads/x-plane-10-new-zealand-pro/
Credits - Big thanks to Mr Lyndiman for the ortho, Robin Corn and Tim Barnes for permission to use their house objects, the creators of WED and Overlay, Laminar Research and also coffee… especially the coffee.
Donations – I don’t have a lot of money but your donation probably isn’t going to be big enough to be life changing for me. So if you feel my efforts are worth a small reward then please give a donation to somebody like Cancer Research instead where your little bit of cash might end up being life changing for somebody else.
Comments. I know people don’t often bother to write comments and that’s fine but if you do have a minute to spare I’d love to know what people think of the story part. If you find it a nice addition and bit of fun I’ll carry on doing them but if nobody is bothering with the NZ Stories missions then I might decide to save myself the hassle of writing the stories to go with future airports. Thanks in advance if you do make a comment about that.
496 downloads
-
NZHK Hokitika – NZ Stories 02
By DazaXIII
First of all, this whole project is designed around trying to make things to fit with the Lyndiman ortho. It’s good so it’s worth the effort of the download and you can find it here.
https://lyndiman.com/category/flight-simulation/
I guess making your own ortho will work too (but I don’t know) although if you just use default stuff then my airports may look a mess.
This is NZHK Hokitika which is on South Island in New Zealand. This was a Mr Lyndiman airport that he corrected to match his ortho. From that version I’ve replaced some buildings of approximately the right footprint size in approximately the right place and added other stuff to make it look nice and played with the terminal building. The terminal still isn’t a great match compared to real life but it’s better than default objects which is what was there before. So as usual this is an artistic license airport but it’s better than default and hopefully fun to use.
The NZ stories. - As well as the airport there is also a document called “The NZ Stories 02.” The story involves five airports from me which I’m going to upload in this batch. It also involves NZCH but there is already a good sceneries by others for that, details in the document. The NZ Stories are a little route with missions and a reason why you’re going to be making the trip to the airports to help bring things to life. It’s a bit of stupid fun and you might enjoy that kind of thing or you might not so it’s up to you.
This one does follow on from NZ Stories chapter 01 and make reference to it so to get the best out of all this it would be best to do chapter 01 first. If you do follow the story then it would also be better to not visit my airports first to have a look around. Let the story uncover some easter eggs for you as you go along.
Other contents - There is a small document which has info abut other tweaks I’ve done to my X Plane to make things look as they do in the photos. It’s there if you want to have a look.
Installation - Usual stuff, download, unzip, put in Custom Scenery, moan at me in the comments section if it doesn’t work.
Libraries - Seriously, just search for the master list of libraries and download the lot of them. I haven’t used all of them but by the time I finish with New Zealand I may well have done and with other people making other nice scenery it’s just useful to have everything.
Additional Libraries.
I don’t think these are part of the master list so you also need this one
https://forums.x-plane.org/index.php?/files/file/32135-world-models-library/
And this one but just the Overlay download part. I’m fairly sure you don’t need to touch the mesh part of the download if you don’t want to.
http://www.alpilotx.net/downloads/x-plane-10-new-zealand-pro/
Credits - Big thanks to Mr Lyndiman for the ortho, Robin Corn and Tim Barnes for permission to use their house objects, the creators of WED and Overlay, Laminar Research and also coffee… especially the coffee.
Donations – I don’t have a lot of money but your donation probably isn’t going to be big enough to be life changing for me. So if you feel my efforts are worth a small reward then please give a donation to somebody like Cancer Research instead where your little bit of cash might end up being life changing for somebody else.
Comments. I know people don’t often bother to write comments and that’s fine but if you do have a minute to spare I’d love to know what people think of the story part. If you find it a nice addition and bit of fun I’ll carry on doing them but if nobody is bothering with the NZ Stories missions then I might decide to save myself the hassle of writing the stories to go with future airports. Thanks in advance if you do make a comment about that.
457 downloads
-
NZTL Tekapo – NZ Stories 02
By DazaXIII
First of all, this whole project is designed around trying to make things to fit with the Lyndiman ortho. It’s good so it’s worth the effort of the download and you can find it here.
https://lyndiman.com/category/flight-simulation/
I guess making your own ortho will work too (but I don’t know) although if you just use default stuff then my airports may look a mess.
This is NZTL Tekapo which is on South Island in New Zealand and actually my favourite real world town from my two visits to NZ. If you get the chance do go there, it’s stunningly pretty.
Anyway, from the Gateway version I quickly noticed (on my set up anyway) that there was a big ridge running through the back part of the apron. My current skill level means I’ve no idea how to fix that but my creativity level means you may not notice there is a ridge anymore now. You’ll understand if you download it. I’ve also given a bit of an upgrade to the observatory area on Mt John and the main street in Tekapo now looks a bit more true to life as long as you don’t fly too low or look that hard.
The NZ stories. - As well as the airport there is also a document called “The NZ Stories 02.” The story involves five airports from me which I’m going to upload in this batch. It also involves NZCH but there is already a good sceneries by others for that, details in the document. The NZ Stories are a little route with missions and a reason why you’re going to be making the trip to the airports to help bring things to life. It’s a bit of stupid fun and you might enjoy that kind of thing or you might not so it’s up to you.
This one does follow on from NZ Stories chapter 01 and make reference to it so to get the best out of all this it would be best to do chapter 01 first. If you do follow the story then it would also be better to not visit my airports first to have a look around. Let the story uncover some easter eggs for you as you go along.
Other contents - There is a small document which has info abut other tweaks I’ve done to my X Plane to make things look as they do in the photos. It’s there if you want to have a look.
Installation - Usual stuff, download, unzip, put in Custom Scenery, moan at me in the comments section if it doesn’t work.
Libraries - Seriously, just search for the master list of libraries and download the lot of them. I haven’t used all of them but by the time I finish with New Zealand I may well have done and with other people making other nice scenery it’s just useful to have everything.
Additional Libraries.
I don’t think these are part of the master list so you also need this one
https://forums.x-plane.org/index.php?/files/file/32135-world-models-library/
And this one but just the Overlay download part. I’m fairly sure you don’t need to touch the mesh part of the download if you don’t want to.
http://www.alpilotx.net/downloads/x-plane-10-new-zealand-pro/
Credits - Big thanks to Mr Lyndiman for the ortho, Robin Corn and Tim Barnes for permission to use their house objects, the creators of WED and Overlay, Laminar Research and also coffee… especially the coffee.
Donations – I don’t have a lot of money but your donation probably isn’t going to be big enough to be life changing for me. So if you feel my efforts are worth a small reward then please give a donation to somebody like Cancer Research instead where your little bit of cash might end up being life changing for somebody else.
Comments. I know people don’t often bother to write comments and that’s fine but if you do have a minute to spare I’d love to know what people think of the story part. If you find it a nice addition and bit of fun I’ll carry on doing them but if nobody is bothering with the NZ Stories missions then I might decide to save myself the hassle of writing the stories to go with future airports. Thanks in advance if you do make a comment about that.
459 downloads
-
NZCS Cromwell – NZ Stories 02
By DazaXIII
First of all, this whole project is designed around trying to make things to fit with the Lyndiman ortho. It’s good so it’s worth the effort of the download and you can find it here.
https://lyndiman.com/category/flight-simulation/
I guess making your own ortho will work too (but I don’t know) although if you just use default stuff then my airports may look a mess.
This is NZCS Cromwell which is on South Island in New Zealand. From the Gateway version I’ve placed some buildings of approximately the right footprint size in approximately the right place and added other stuff to make it look nice. There is an extra shed as well to cover a parked plane blob on the ortho tile so it’s still more of an artistic licence airport rather than correct to real life.
The NZ stories. - As well as the airport there is also a document called “The NZ Stories 02.” The story involves five airports from me which I’m going to upload in this batch. It also involves NZCH but there is already a good sceneries by others for that, details in the document. The NZ Stories are a little route with missions and a reason why you’re going to be making the trip to the airports to help bring things to life. It’s a bit of stupid fun and you might enjoy that kind of thing or you might not so it’s up to you.
This one does follow on from NZ Stories chapter 01 and make reference to it so to get the best out of all this it would be best to do chapter 01 first. If you do follow the story then it would also be better to not visit my airports first to have a look around. Let the story uncover some easter eggs for you as you go along.
Other contents - There is a small document which has info abut other tweaks I’ve done to my X Plane to make things look as they do in the photos. It’s there if you want to have a look.
Installation - Usual stuff, download, unzip, put in Custom Scenery, moan at me in the comments section if it doesn’t work.
Libraries - Seriously, just search for the master list of libraries and download the lot of them. I haven’t used all of them but by the time I finish with New Zealand I may well have done and with other people making other nice scenery it’s just useful to have everything.
Additional Libraries.
I don’t think these are part of the master list so you also need this one
https://forums.x-plane.org/index.php?/files/file/32135-world-models-library/
And this one but just the Overlay download part. I’m fairly sure you don’t need to touch the mesh part of the download if you don’t want to.
http://www.alpilotx.net/downloads/x-plane-10-new-zealand-pro/
Credits - Big thanks to Mr Lyndiman for the ortho, Robin Corn and Tim Barnes for permission to use their house objects, the creators of WED and Overlay, Laminar Research and also coffee… especially the coffee.
Donations – I don’t have a lot of money but your donation probably isn’t going to be big enough to be life changing for me. So if you feel my efforts are worth a small reward then please give a donation to somebody like Cancer Research instead where your little bit of cash might end up being life changing for somebody else.
Comments - I know people don’t often bother to write comments and that’s fine but if you do have a minute to spare I’d love to know what people think of the story part. If you find it a nice addition and bit of fun I’ll carry on doing them but if nobody is bothering with the NZ Stories missions then I might decide to save myself the hassle of writing the stories to go with future airports. Thanks in advance if you do make a comment about that.
370 downloads