Scenery Packages
11,447 files
-
Fort Lauderdale/Hollywood International Airport
By starseed
KFLL- Fort Lauderdale/Hollywood International Airport
Fort Lauderdale–Hollywood International Airport is located roughly 25nm North of Miami. This airport serves as a Hub for Spirit Airlines, JetBlue, and Allegiant Air. American, United and Delta also have a presence at this facility along with one of the main offices of the FAA. Hollywood International boasts over 700 daily flights including many long haul flights nationally and internationally.
This is a newer rendition of the default XPlane-11 Fort Lauderdale International. All the terminals have been re-worked with correct gate and window placements. Auto-gate and Marshallers have been added to every gate. FBO, general aviation parking and Gulf Stream maintenance area are all re-done. Cargo ramps for Fed X and UPS have been fortified and extras added. Enhanced night lighting and airport terminal lighting all have been redone. This airport one of my favorite alternate destinations instead of busier Miami International.
[Almost every item , object ,light and vegetation is placed by hand through hours of detailed work.Due to limitations some of the objects are fictional and not 100 % accurate.]
Tested in Vulkan X-Plane 11.50+
Installation:
Simply unzip the file "KFLL- Fort Lauderdale/Hollywood International" place into your custom scenery folder in X-Plane 11 and that's it , enjoy!
C:\X-Plane 11\Custom Scenery
* Read me file inside
Required scenery libraries:
Mister-X 1.61+
CDB- Library 2.3
[All other object used with X-Plane 11 scenery library.]
2,017 downloads
-
LFQA Reims Prunay
By leroy29
Reims Prunay (LFQA) is a french airport located East of France (Champagne Ardennes, marne).
The airport has a paved runway (1150x30) and one herb runway (1170x80).
VAC chart is included in the zip file.
Information on the airport : https://www.accraf.com/, http://aeroclub-crnaest.fr/club/
This scenery was created mainly with custom made buildings and hangars, based on real pictures, including in the vicinity the stele wich is a tribute to the aviator
Henri Farman, who realised the first flight from "city to city" in 1908, taking off from Reims. You will also find an hotel and pizzeria.
However, some libraries are needed for standards objects (see below).
Installation : just put the directory "LFQA Reims Prunay" in your custom scenery directory. Tested with X Plane 11.50 without Vulkan.
The following libraries are needed (https://forums.x-plane.org/index.php?/files/category/165-libraries-for-scenery/) :
Openscenery
JB
CDB
BS2001
handy objects
3D people
346 downloads
(1 review)0 comments
Updated
-
SBNF - Navegantes
I bring you a Scenario of Navegantes Airport that is in Santa Catarina in the South of Brazil , the airport is managed by the infraero infrastructure company , In addition to the airport meeting the demand of the city of navegantes , the airport already serves the cities of Penha, Itajai and Balneario Camboriú . ------------------------------------------------------------------------------- the passenger terminal is under renovation, so i used the laminar default passenger terminal because the satellite images are not up to date, but when they do i update.
Most of the modeling was done by Rafael Pereira For the Run scenario requires these Libraries - Devinci_Library
- Laminar_library
- CDB_Library
- MisterX_Library
- HandyObjects If you can visit my website - Amo Voar Virtual https://amovoarvirtual.blogspot.com/ Download the scenario and if you have problems, notify me193 downloads
-
SCIP - Moais of the Easter Island
By droide
Enjoy a VFR flight to visit the astonishing Moais, that can be found all around the Easter Island.
Required libraries :
CDB library
3D people library
Handyobjects library
R2 library
RD library
Opensceneryx library
MisterX library
Pm Library
Gt Library
FF library
HungaryVFR library.
World models library
Flags_of the world library
Sea Life library
Follow the provided instructions to create the orthophotos
Youtube :
296 downloads
(1 review)0 comments
Updated
-
LRTZ - Tuzla International Airport
By LH475
This airport was missing from every sim, so I made it myself, first time I ever make a scenery so don't expect anything flashy.
Place it into custom scenery to install... i think.
67 downloads
-
LFFV Vierzon Mereau
By leroy29
Vierzon Mereau (LFFV) is a french airport located Centre of France (Cher).
The airport has one herb runway (680x60).
VAC chart is included in the zip file.
This scenery was created mainly with custom made buildings and hangars, based on real pictures,
However, some libraries are needed for standards objects (see below).
Installation : just put the directory "LFFV Vierzon Mereau" in your custom scenery directory. Tested with X Plane 11.50 without Vulkan.
The following libraries are needed (https://forums.x-plane.org/index.php?/files/category/165-libraries-for-scenery/) :
Openscenery
JB
CDB
BS2001
handy objects
3D people
171 downloads
(0 reviews)0 comments
Submitted
-
LFLD Bourges
By leroy29
Bourges (LFLD) is a french airport located Centre of France (Cher).
The airport has a paved runway (1550x45) and one herb runway (915x60).
VAC chart is included in the zip file.
Information on the airport : http://www.aeroclub-bourges.com/
This airfield is not to be confused with the military Base of AVORD (LFOA, east 10 nm)
This scenery was created mainly with custom made buildings and hangars, based on real pictures,
However, some libraries are needed for standards objects (see below).
Installation : just put the directory "LFLD" in your custom scenery directory. Tested with X Plane 11.50 without Vulkan.
The following libraries are needed (https://forums.x-plane.org/index.php?/files/category/165-libraries-for-scenery/) :
Openscenery
JB
CDB
BS2001
handy objects
3D people
318 downloads
-
Kherson Airport UKOH
By elegrant
Kherson International Airport (Ukrainian: International Airport Kherson) (IATA: KHE, ICAO: UKOH) is an airport serving Kherson in Kherson Oblast, Ukraine.
273 downloads
-
FVWN - Hwange National Park Airport - Zimbabwe
By Petethalight
Who likes to fly VFR over Africa? From Wikipedia, the free encyclopedia:
Hwange National Park Airport (IATA: HWN, ICAO: FVWN) is an airport in Zimbabwe that serves the Hwange National Park. Because of the ongoing economic situation in Zimbabwe, and the 2012 collapse of Air Zimbabwe, services are limited, but charter and a 3 times per week scheduled rotation to Victoria Falls is currently operated (April 2011) by Solenta Aviation using a 12-seat Cessna Grand Caravan aircraft.
Air Zimbabwe formerly included Hwange National Park on its daily internal service of Harare - Victoria Falls - Hwange - Kariba - Harare.
The Hwange VOR-DME (Ident: VWN) is located on the field. The Hwange non-directional beacon (Ident: PO) is located 4.4 nautical miles (8.1 km) off the threshold of runway 08.[3][4]
Necessary libraries: CDB_Library
CCVA022_Objects_Library
MisterX_Library
171 downloads
-
LFXB Saintes
By leroy29
Saintes Thenac (LFXB) is a french airport located South West of France (Nouvelle aquitaine, Charente Maritime).
The airport has a paved runway (900x45) and two herb runways (900x80 and 900x50 m).
VAC chart is included in the zip file.
information on the airfield : https://aeroclubsaintes.wixsite.com/aeroclub-de-saintes/avion
In the vicinity, you may find the air military school and airbase (BA 722) with a static plane "mirage III".
This scenery was created mainly with custom made buildings and hangars, including military base and night textures, based on real pictures,
However, some libraries are needed for standards objects (see below).
Installation : just put the directory "LFXB Saintes" in your custom scenery directory. Tested with X Plane 11.50 without Vulkan.
The following libraries are needed (https://forums.x-plane.org/index.php?/files/category/165-libraries-for-scenery/ ) :
Openscenery
JB
CDB
BS2001
handy objects
3D people
230 downloads
(1 review)0 comments
Submitted
-
US CA KR66 - Amboy Route 66 (2020)
By ruifo
PayPal donation for my X-Plane Freeware Project - or use this link: https://www.paypal.me/ruifo
*******
Scenary package for X-Plane 11
KR66 - Amboy Route 66 field, CA, USA
Version 1.0.1 (2020-11-03)
100% freeware
2020-Nov-02
*******
Scenery Map: https://drive.google.com/open?id=1qgJS59aY441y6h-l5j9-ZgHI-VQ&usp=sharing
Paypal donations: https://www.paypal.me/ruifo
Or: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=AUMM75CS3YXR2&item_name=ruifo+(X-Plane+Freeware+Project)¤cy_code=USD&source=url
*******
This is an X-Plane 11 scenery package for KR66 - Amboy Route 66 field, California, USA. It is a real airport, however off the charts. Coordinates:
34.5600000° -115.7500000°
34°33.60000' -115°45.00000'
34°33'36.0000" -115°45'00.0000"
This is based on Matt Guthmiller's flight video, from 2018. Check it out:
Amboy is an unincorporated community in San Bernardino County, in California's Mojave Desert, west of Needles and east of Ludlow on historic Route 66. It is roughly 60 miles (97 km) northeast of Twentynine Palms. Prior to 2015, the town's business district contained a post office, a historic restaurant-motel, and a Route 66 tourist shop.
This scenery was tested and is operational (as of November 02, 2020) in "X-Plane 11.50 Vulkan 64 bit", Windows 10 Home.
Safe flights & happy landings!
*******
X-Plane 11 Installation:
- If you had it, delete the previous version for AR66 v1.0.0 first.
- After that, copy and paste the folder "US CA KR66 - Amboy Route 66 v1.0.1", and all their content, inside your "\X-Plane 11\Custom Scenery\" folder, as usual in the X-Plane world.
*******
Additional scenery libraries needed:
- NAPS Library
- Flags of the World Library
231 downloads
-
Härjedalen Sveg Airport ESND
By OskarSandsjo
Härjedalen Sveg Airport (ESND): A small regional airport located in Härjedalen, Sweden. There are daily flights between Sveg and Stockholm operated by Jonair flying B200 King Air. Included is also the helipad located at the health center in Sveg.
This scenery needs the following librarys in order to work:
- MisterX (special thanks for allowing re-texturing!)
- SE-Lib >1.6x (found on www.rbdesign.se -> Downloads -> Scenery -> Svenska scnarier till XP11)
- 1-SE-LA-X-LIBRARY1-2 V2.0 (found on www.rbdesign.se -> Downloads -> Scenery -> Svenska scnarier till XP11)
- OpensceneryX
- PuF_Libs
- ALES_DEV_LIB
❤️All this work is made on my free time for the community to enjoy. If you like my work you can support me by sending a coin or beer to: paypal.me/oskarsandsjo Any donation is welcome, thank you!❤️
355 downloads
(7 reviews)0 comments
Updated
-
LFIH Chalais
By leroy29
Chalais (LFIH) is a french airport located South West of France (Nouvelle aquitaine, Charente).
The airport has an herb runway (840 x 60 m).
VAC chart is included in the zip file.
information on the airfield : http://www.les-ailes-chalaisiennes.com/laero-club/
Note that the commemorative plaque for Andre et rene fradon is not at the right place but its more visible.
This scenery was created mainly with custom made buildings and hangars, including night textures, based on real pictures,
However, some libraries are needed for standards objects (see below).
Installation : just put the directory "LFIH Chalais" in your custom scenery directory. Tested with X Plane 11.50 without Vulkan.
The following libraries are needed (https://forums.x-plane.org/index.php?/files/category/165-libraries-for-scenery/) :
Openscenery
JB
CDB
BS2001
handy objects
3D people
180 downloads
(0 reviews)0 comments
Submitted
-
FISD Joensuu Airport (EFJO) for X-Plane 11
By Miska347
Joensuu Airport created by FISD/Sebastian Rönnlund, converted to X-Plane 11. Originally created for FSX/P3D. Thanks to the scenery creators for allowing me to use their objects! 🙂 Here you will find the original file (fsnordic.net).
Features
Extremely detailed buildings and high resolution textures Custom ground textures Aircraft hangar with complete and detailed interior Night textures The city of Joensuu (city hall, church, hospital, powerplant, smoking chimneys, several bridges etc.) Joensuu
Joensuu, a medium-sized city by Finnish standards, is situated in Eastern Finland in the province of Pohjois-Karjala. EFJO is the easternmost airport of the European Union. The airport is served by Finnair with flights to Helsinki-Vantaa operated by ATR72s. The airport is also of importance for the local industry.
Installation
Install required libraries Move EFJO Joensuu (FISD) for X-Plane 11 to Custom Scenery folder. (Optional) Install orthophotos in the Joensuu area. Required libraries
MisterX Library OpenSceneryX
Objects made by: FISD / S.Rönnlund, T.Kantomaa, M.Maliniemi, J.Sinkkonen, J.Varje
371 downloads
-
PAKK Koyuk Package
By alaskadad
Koyuk, Alaska U.S.A.
Koyuk is located on the north side of Norton Bay.
Koyuk Alfred Adams
RWY 01-19: 3002X60 (Grvl) MIRL
RWY 01: VASI(V4L)-GA 3.0 degrees TCH 25'. Brush
RWY 19:VASI(V4R)-GA 4.0 degrees TCH 32'. Brush
Service: LGT ACTVT VASI Rwy 01 and 19; MIRL Rwy 01-19-CTAF.
Rwy 19 VASI GS does not meet terrain clnc criteria except within 2 1/2 NM of rwy
AIRPORT REMARKS: Unattended Turbulence on apch when wind from NW.
Rwy 01-19 NSTD markings, marked with lgts, cones, and thld panels.
Rwy condition not monitored, recommended visual inspection prior to landing.
Tested only in XP-10
Installation Instructions: The package comes with 3 different files. PAKK Koyuk is the main file to put in your custom scenery folder. PAKK Koyuk Winter is for when you fly with snow textures and is either switched with PAKK Koyuk or if you have separate XP set-up with winter textures only put it in your custom scenery folder. This brings us to the last file PA00 ERAlaska Destination - 10Compliant_Release2-V1. If you have dowloaded this file in the past from bc, there will be a conflict with Koyuk. Delete the old file and place the new one provided so both sceneries can be enjoyed problem free.
Libraries Required For This Package:
CBD
gt Library
Handyobjects
JB_Library
Mister X
NAPS
Openscenery X
RA_Library
RD_Libray
RuScenery
If you do not have the Libraries in this package, you may download links in the Master Library List;
Credits:
RocLobster for my custom signs (Danger, Stop and Unsafe Sign)
Scottish-Wings for making my custom objects (Post/reflector, Telephone pole/light, Electric meter, Transformer, Retextured Security Hut, MIRL Red Green Lights and ATV with Rider.)
270 downloads
-
LFCV Villefranche de rouergue
By leroy29
Villefranche de Rouergue (LFCV) is a french airport located South of France (Occitanie, Aveyron).
The airport has an herb runway (1030 x 80 m).
VAC chart is included in the zip file.
This scenery was created mainly with custom made buildings and hangars, including night textures, based on real pictures,
However, some libraries are needed for standards objects (see below).
Installation : just put the directory "LFCV Villefranche de Rouergue" in your custom scenery directory. Tested with X Plane 11.50 without Vulkan.
The following libraries are needed (https://forums.x-plane.org/index.php?/files/category/165-libraries-for-scenery/) :
Openscenery
JB
CDB
BS2001
handy objects
3D people
194 downloads
(0 reviews)0 comments
Updated
-
FVBL - Malipati - Zimbabwe
By Petethalight
Who likes to fly VFR over Africa? Malipati, Masvingo Province, ZIMBABWE
Coordinates -22.063618,31.436257
Airline service? no Necessary libraries: RD Library - https://mega.nz/file/iIgxmbqK#D_ZJnf7nK4kx5SqTap0hau_YS2lWwOaanKRwBDwxTIQ
CDB_Library
MisterX_Library
69 downloads
(0 reviews)0 comments
Submitted
-
FLNA - Ngoma Airport - Zambia
By Petethalight
Who likes to fly VFR over Africa? From Wikipedia, the free encyclopedia:
Ngoma Airport (IATA: ZGM, ICAO: FLNA) is a rural airstrip serving Ngoma (west of Namwala and south of Itezhi-Tezhi), a settlement in the Southern Province in Zambia.
The runway is 6 kilometres (3.7 mi) south of the village. It has an additional 205 metres (673 ft) of gravelled overrun on the east end.
Necessary libraries: RD Library - https://mega.nz/file/iIgxmbqK#D_ZJnf7nK4kx5SqTap0hau_YS2lWwOaanKRwBDwxTIQ
CCVA022_Objects_Library
MisterX_Library
79 downloads
(0 reviews)0 comments
Submitted
-
FLWW - Waka Waka Airstrip - Zambia
By Petethalight
Who likes to fly VFR over Africa? Waka Waka, Eastern Province, ZAMBIA
Coordinates -12.450400,32.257000
https://skyvector.com/?ll=-12.450400,32.257000&chart=301&zoom=2
Necessary libraries: RD_Library
CDB_library
75 downloads
(0 reviews)0 comments
Submitted
-
KCOS-Colorado Springs Municipal Airport
By starseed
KCOS- Colorado Springs Municipal Airport
This is a new rendition of the XP-11 default Colorado Springs Municipal Airport. The terminals have been completely re-worked to add more eye candy and the feel of a busier airport layout. All gates now have Auto Gate with Marshaller added. Newly compiled GA hangars have been added. Also added is enhanced night lighting. A re-work of Peterson Air force base on the other side of the field has been fortified.This is also new home to the Space Force 21st Space Wing ,which works in collaboration with NORAD at near by Cheyenne Mountain. The airport boasts a 13,501 ft. runway that can handle any size aircraft. This airport is located 70nm South of Denver. Another great mid size airport to fly into.
Tested in Vulkan X-Plane 11.50+
Installation:
Simply unzip the file "KCOS Colorado Springs Municipal Airport" place into your custom scenery folder in X-Plane 11 and that's it , enjoy!
C:\X-Plane 11\Custom Scenery
* Read me file inside
Required scenery libraries:
Mister-X 1.61+
CDB- Library 2.3
Open Scenery X
[All other object used with X-Plane 11 scenery library.]
2,413 downloads
-
AHS_XLE02_ALHUCEMAS.zip
By ABELGB
AHS_XLE02_ALHUCEMAS.zip
XLE02_ Peñón de Alhucemas
Hello friends of the Seaplanes and Helicopters, I continue to build and adapt this set of scenarios in Pantanos de España for simulation practice.
Given the difficulty, the physical resemblance is not achieved, but the geographical location.
This scenario does not have a Seaplane base.
The entire helicopter base is invented (not real) but allows the use of helicopters
in Xplane simulation.
wikipedia.org quotes:
The rock of Alhucemas is an islet in the western Mediterranean, belonging to Spain and located in the bay of the same name, 700 meters from the coast of Morocco and 84 kilometers from the nearest Spanish territory, Melilla. It integrates, along with two uninhabited islets (Isla de Tierra and Isla de Mar), located just 50 meters from the coast, and 800 and 900 meters away from the rock, the Alhucemas islands.
I hope you like it, enjoy it and send me your comments.
86 downloads
(1 review)0 comments
Submitted
-
AHS_XLE01_Peñon Velez de la Gomera.zip
By ABELGB
AHS_XLE01_Peñon Velez de la Gomera.zip
XLE01_ Peñón de Vélez de la Gomera
Hola amigos de los hidroaviones y helicópteros, sigo construyendo y adaptando este conjunto de escenarios españoles para la práctica de simulación.
Dada la dificultad, no se logra el parecido físico, sino la ubicación geográfica.
Toda la base de hidroaviones y helicópteros está inventada (no es real) pero permite el uso de hidroaviones y helicópteros en la simulación de Xplane.
citas de wikipedia.org:
El Peñón de Vélez de la es una roca española del norte de África. Se encuentra a 126 kilómetros al oeste de Melilla y a 117 kilómetros al sureste de Ceuta. Tiene una superficie aproximada de 19.000 metros cuadrados y una altitud máxima de 87 metros. Originalmente fue una isla rocosa hasta que un terremoto en 1930 la convirtió en una península, uniéndola con el continente a través de un estrecho istmo de arena, o tombolo, que limita con Marruecos.
Espero que les guste, disfrútenlo y envíenme sus comentarios.
151 downloads
-
KMPE - Philadelphia Muni
By DavidWS10
KMPE - Philadelphia Municipal Airport 1.0
Mississippi, USA
Not to be confused with Philadelphia International Airport (KPHL).
Philadelphia Municipal Airport is a public use airport in Neshoba County, Mississippi, United States. It is owned by the City of Philadelphia and located two nautical miles (4 km) northwest of the town's central business district, and about the same distance from my house. I originally built this small, rural airport for the Gateway, but was never happy with it because it lacked the realism I knew I was capable of producing. Although still not 100% accurate (the coloring of the terminal building is off, as is the matching pair of hangars), I like it and am proud to be releasing my first quasi-custom airport for the rest of the world to hopefully appreciate. A future upgrade to this scenery will be the addition of the industrial park that has been built next to, and in close proximity around the airport.
Philadelphia Municipal Airport covers an area of 60 acres with a field elevation elevation of 458 feet (140 m) above mean sea level. It has one runway, designated 18/36, with an asphalt surface measuring 5,001 by 75 feet (1,524 x 23 m), which was resurfaced in 2017. The “new” Terminal building was built at about the same time the runway was resurfaced. Now, why is the runway 5,001 feet long instead of just 5,000? The short answer is that the contractor had enough material left over to add an extra foot of runway. The city had paid for the material and labor, so.... End of story. Right? The long answer we won't discuss as it gets quite political.
Coordinates: 32°47′57″N - 89°07′34″W; Runway headings are 005°/185°, True.
Airport Operational Statistics
Aircraft based on the field:
10
Single engine airplanes:
5
Multi engine airplanes:
4
Jet airplanes:
1
Aircraft operations: average 25/day*
59%
transient general aviation
40%
local general aviation
2%
military
* For 12-month period ending 19 March 2020
This scenery pack requires the following scenery Libraries:
OpensceneryX
Aircraft-Static and Animated Library
CDB-Library
JB_Library
MisterX_Library
If you do not already have the libraries used in this package, you may find download links in the Master Library List.
The Custom objects are included within the scenery pack.
Follow the standard procedure for installing this airport scenery into X-Plane 11.
Any and all comments/reviews are greatly appreciated.
75 downloads
(0 reviews)0 comments
Submitted
-
NZKY Kowhai
By DazaXIII
Check out the link below to the All Of New Zealand upload. That has info, extras and upgrades that may not appear anywhere else so it’s worth looking at. All my airports are designed to to fit with the latest Lyndiman ortho and that All Of New Zealand link will also tell you where to get the ortho from.
https://forums.x-plane.org/index.php?/files/file/54147-all-of-new-zealand/
NOTAM. Do you want a free hangar? Slightly off topic for this post but I’m working on a much bigger version of South Fiordland part 2. There’s room at one new airfield for personalised parking spots so if you’d like one included in the scenery for yourself then let me know. Either tell me what you want or do the artwork yourself to fit in a space roughly 2 units tall by 5 units wide and I’ll see what I can do.
Video preview.
https://youtu.be/7xJ9W-VAJmQ
Today we have NZKY Kowhai which is a small grass strip on North Island. There’s not a lot there so I’ve not got much to say about it but who knows, you might like it.
Libraries – see the first paragraph above about the All Of New Zealand thing. In there is a pdf and that covers what you need to get my scenery to work and some other optional extras to make X Plane look or run better so the easiest thing is to just have a read of that.
Installation and Support - Usual stuff, download, unzip, put in Custom Scenery, moan at me if it doesn’t work. Note, I’ve now done lots of airports and it’s harder to keep track of things so if you post a comment on a scenery upload and want a response I may miss it. So just send me a private message instead. I will notice those and I will always reply and try to help if I can.
Credits - Big thanks to Mr Lyndiman for the ortho, the various freeware library creators, Laminar Research, the creators of WED and Overlay, the permissions I’ve received from Robin Corn and Tim Barnes for their house objects, Royaloak, Lawrie Roache, Chris Norman, Vampire, Peter Lohr, Robin Corn, nightflyer256 and Takeoff7 for airport modifications, Zlin142’s grass, MisterX‘s hangar, md500f, Ndorfn and TinkerNZ for the objects, cdtrent for the R4 ortho help, Flyagi for permission to modify her trees and newest on the list, Scottish Wings for permission to use and modify his Handy Objects … and also thanks to coffee… especially the coffee.
Donations – I don’t have a lot of money but your donation probably isn’t going to be big enough to be life changing for me. So if you feel my efforts are worth a small reward then please give a donation to somebody like Cancer Research instead where it’s possible that your little bit of cash might end up being life changing for somebody else.
105 downloads
(1 review)0 comments
Updated
-
HTMP - Mpanda Airport - Tanzania
By Petethalight
Who likes to fly VFR over Africa? From Wikipedia, the free encyclopedia:
Mpanda Airport (IATA: NPY, ICAO: HTMP) is an airport in western Tanzania serving the town of Mpanda and the surrounding Katavi Region. It is on the southeastern side of the town. The UN Refugee Agency UNHCR helped the Government of Tanzania to finance the upgrade of the airstrip into an airport as a gesture of its appreciation for hosting Burundian refugees for more than 30 years.[4][5]
The airport was officially opened by the Tanzanian Vice President Mohamed Gharib Bilal on 24 November 2012.[6] The airport will help improve access to the Katavi National Park.
Necessary libraries: RD_Library
RuScenery
PM_Library
121 downloads