Jump to content

CYCG West Kootenay Regional (Castlegar) Airport 2.5

   (3 reviews)

6 Screenshots

About This File

CYCG - Castlegar 2.5

Installation: Download the zip file, unzip it and then copy the whole folder into your custom scenery folder in your main x-plane folder.

Whats New: 

Updated it for X-Plane 11.30 and above using the latest version of WED. Checked it was compatible with Xplane 11.50 b3 in Vulkan 

Extended tree line so it fits better with the default xplane scenery

Requires the following libraries:

BS2001

CDB library

The Handy Objects Library

JB Library

Flags of the world

Madagascar library

MisterX library

NAPS library

World Models

Openscenery

RD library

RE library

Rescue X

RUscenery

 

All available from http://forums.x-plane.org/index.php?/forums/topic/90776-master-list-of-libraries/

With thanks to the following people for creating extra objects and animations used in this update:

FlybyGuy, Aerodesign, www.virtualdesign3d.com, Paul Mort, Rik Nilssen, Pugwash, Mr3d, Jean Pierre Baril, & Carlos Rigolan

 

The West Kootenay Regional Airport, (Castlegar Airport) (IATA: YCGICAO: CYCG) is a small regional airport located 2 nautical miles (3.7 km; 2.3 mi)[1] south southeast of Castlegar, British Columbia. Owned and operated by the City of Castlegar, YCG has a 15,317 sq ft (1,423 m2) passenger terminal. Due to the mountainous terrain impinging on both runway approaches, there is no possibility of a straight-in approach. The airport is therefore certified for day operations only, and the glideslope on approach is set to a steep 5.0° rather than the standard 3.0°. The instrument approaches to Castlegar are considered among the most challenging of any in use at a commercial airport in North America. As of 2011, the Dash-8s servicing the airport required minimums of 3400 foot cloud ceilings and three miles visibility (Jazz adds 100 feet and one mile to these minimums).

In 2006, Castlegar airport was developing departure procedures for night time operation, but as of 2010 the airport was certified for daytime operation only.[1] A $1 million programme installed six beacons on the hills of the Columbia Valley that allow night-time take offs from the airport. It is expected this will only be used by air ambulances and medical traffic.

The airport is classified as an airport of entry by NAV CANADA and is staffed by the Canada Border Services Agency. The customs at CBSA officers at this airport can handle general aviation aircraft only, with no more than 15 passengers.[1]

 

General Information   Airport codes: YCG CYCG Flight Service Station Phone: 250-365-3013 Type: Regional Airport Flight Service Station Hours:
DAYLIGHT HOURS Scheduled airline service: Yes Approaches: LOC/DME RNA Latitude: 49.296398 | 49 17.783890 N | N49 17 47 Open 24 Hours: No Longitude: -117.632004 | 117 37.920227 W | W117 37 55 Airport of Entry: Yes, by pre-arrangement through Border Services Field elevation: 1,624 ft/495 m MSL Slots Required: No Magnetic variation: 17.0°E Handling Mandatory: No
Airport Restrictions & Information   NO NIGHT OPERATIONS OPERATOR 250-365-7227 CUSTOMS PNR 888-226-7277 RADIO 122.1/126.7 FLIGHT SERVICE 866-992-7433  
Radio Communication Frequencies   ATF: 122.1 MHz RCO: 126.7 MHz (KAMLOOPS RDO) CNTR: 134.2 MHz (VANCOUVER CNTR) RDO: 122.1 MHz
Runways   15/33 5,300 x 150 ft (1,615 x 46 m) — paved — lighted

 


What's New in Version 2.5   See changelog

Released

  • Version 2.5 - Updated it to work with 11.30+ using the latest version of WED. Checked it was compatible with 11.50 Vulkan
  • Version 2.4 - Added more objects like a hot air balloon, vending machines and more, extended surrounding trees, updated it for 11.30 
  • Version 2.3 - Added more objects and changed the surrounding trees to default trees to make it compatible with Terramax
  • Version 2.2 - Added more airport buildings and objects. Added more ramp starts. Added the correct ground markings and lots more
  • Version 2.1 - Added an exclusion zone around the airport to help reduce conflicts with global airports
  • Version 2.0 - Added new castlegar terminal. With thanks to Paul Mort for creating the original 3-d model. Added animated items to bring the airport alive see details below.
  • Version 1.0 - Initial Release
  • Like 4
  • Thanks 1

User Feedback

You may only provide a review once you have downloaded the file.


slimtannor

· Edited by slimtannor

   2 of 2 members found this review helpful 2 / 2 members

Still get an error in the log: All libraries are present.

 

PNG warning! Incomplete compressed datastream in iCCP chunk, Custom Scenery/CYCG - Castlegar 2.0/Objects/Objet_ scenery-ec145t2 parking/EC145T2.png
PNG warning! Profile size field missing from iCCP chunk, Custom Scenery/CYCG - Castlegar 2.0/Objects/Objet_ scenery-ec145t2 parking/EC145T2.png

Failed to find resource 'truck.obj', referenced from scenery package 'Custom Scenery/CYCG - Castlegar 2.0/'.
0:00:03.605 E/SCN: Custom Scenery/CYCG - Castlegar 2.0/Earth nav data/+40-120/+49-118.dsf:
0:00:03.605 E/SCN: Unable to locate object: truck.obj
PNG warning! Incomplete compressed datastream in iCCP chunk, Custom Scenery/CYCG - Castlegar 2.0/Objects/TRACTOR-MOWER_dynamic-Static/tracteur.png
PNG warning! Profile size field missing from iCCP chunk, Custom Scenery/CYCG - Castlegar 2.0/Objects/TRACTOR-MOWER_dynamic-Static/tracteur.png
PNG warning! Incomplete compressed datastream in iCCP chunk, Custom Scenery/CYCG - Castlegar 2.0/Objects/TRACTOR-MOWER_dynamic-Static/tracteur_LIT.png
PNG warning! Profile size field missing from iCCP chunk, Custom Scenery/CYCG - Castlegar 2.0/Objects/TRACTOR-MOWER_dynamic-Static/tracteur_LIT.png

 

I fixed this by opening the .dsf file with Notepad (Windows). I did a search for "truck" and found the "truck.obj" had no library reference to it, so I deleted the phrase "truck.obj" and resaved the .dsf file. Now no more error messages.

Link to review
nevertrustasmilincat

  

Thanks!

I used your CYCG for years in XP10 and was totally shocked when I landed 2 hrs ago in a different scenery 🤪

Nice feature that it now will work with JSGME, although some surfaces still remain green/ light brown.

nevertrustasmilincat

Link to review
×
×
  • Create New...