Richard_Nunes
-
Posts
380 -
Joined
-
Last visited
Content Type
Profiles
Downloads
Events
Forums
Articles
Posts posted by Richard_Nunes
-
-
On 3/14/2019 at 11:55 AM, Dervakon said:
I would like to said I love your scenery, CYUL is my home town, but I got some some issue with the scenery. I have a vanilla X-Plane 11 where I'm able to make some test.
I got a 4k monitor but I use 2K resolution at 30Hz lock my frame at 30 FPS, 99% of the time I stay at 30 FPS but...
This is my problem, when I'm on approche for 24R (Red airplane with red cone) my FPS drop to 24-25 FPS with the ZIBO 737, when I pass the building of Air Transat and Air Inuit (Red airplane with green cone) everything goes back to normal.
I think I find out what was the cause. If place your self near Q taxiway (small red X) and look at the Air inuit building you can see light artefact (aqua line), I think it the cause of my drop of FPS. Even if I'm flying at 5000Ft and look at this area you can see a drop at my FPS but I just look a side of it everything goes back to 30 FPS
This what I see
On the front of terminal 1 you don't see this light artefact and my frame are at 30 FPS but I have a drop if I go on the back of the terminal near parking spot 64 to 73
I make a fresh install of CYUL from the org,
Hi Dervakon.
Thanks for your Feedback, we'll check.
Good flights.-
1
-
-
7 minutes ago, vilgrind said:
Autogate does indeed work but I'm never on the right spot when I select an initial gate. Tried with multiple planes and reinstalled the scenery.
I'm using the provided Orthophotos and Mesh, any clues in the Log?
Great products, thank you!
Hello Vilgrind.
This can not be the scenario.
Some other scenario you own may be causing conflict in positions.
Check this "15 Custom Scenery / CYVR tdg /" or "79 Custom Scenery / C Toronto 2 /"
Otherwise try another one already installed for that region in your scenario library.Cheers
-
57 minutes ago, ivozzz said:
Thanks for the reply. Im seeing 18/12/03 for that file.
I purchased through steam, so I cant tell when steam is updating it or not as it is a DLC for x-plane through steam... No idea how to upgrade from within steam.
Hello Commando.
So do not worry, on this date 18/12/03 is updated version 1.4.Good flights
-
On 2/14/2019 at 3:24 PM, grader said:
Help!!! Today I decide to upgrade my YYZ from v1.3 to 1.4. I found that when I tuned my radio to the ATIS frequency, it stopped after the altimeter reading with no runway information. Also, when keying the ATC window I only see one available frequency for the area control and can't file a flight plan. I switched back to v1.3 and all is well. Something I did wrong??
Hello Commander.
We have many radios added in version 1.4.
The frequencies are represented in the letters.
But there were some adjustments and we corrected some errors in the frequency.
Try using this Path by replacing the DSF file with:
X-Plane 11 \ Custom Scenery \ CA-CYYZ-B-Toronto Airpot Pearson v1.4 edit 20-11-2018 \ Earth nav data \ + 40-080For ATIS use the frequencies. 128.825 and 133.10
The frequencies have been tested at 1.4 and work very well now.
Below are all frequencies added.ATIS 120.825
Toronto Tower Tower 118.7
Toronto Tower Tower 118.35
Toronto Ground Ground Control 121.9
Toronto Ground Ground Control 121.65
Toronto Ground Ground Control 119.1
Toronto Ground Ground Control 118.0
Terminal 3 Ramp / Taxi Control 122,875
South Apron Ramp / Taxi Control 122,075
North Apron Ramp / Taxi Control 122,275
Toronto Clearance Delivry Clearance Delivery 121.3
Toronto Arrival Arrival Control 132.8 Arrival Service
Toronto Arrival Arrival Control 125.4 Arrival Service
Toronto Arrival Arrival Control 124,475 Arrival Service
Toronto Departure Departure Control 128.8 Departure Service
Toronto Departure Departure Control 127,575 Departure Service
Toronto Terminal Unknown 133.4
Toronto Terminal Unknown 119.3
London Radio Radio 123.275 Flight Info Service RCOGood flights.
Cheers. -
On 2/23/2019 at 10:05 PM, ivozzz said:
Is there anyway to tell what version I am running? Steam says it’s automatic but I’m convinced it isnt the latest release.
Anything in the scenery folder that would tell me what version it is??
Hello Friend
Yes, check the date of your DSF file that is in the path folder:
X-Plane 11 \ Custom Scenery \ CA-CYYZ-A-Toronto Airpot Pearson \ Earth nav dataThe date of this file should be 11/20/2018.
In case the date does not match, send us a print.
When did you download the update for the last time?Cheers.
-
5 minutes ago, ivozzz said:
Richard, any way I can get a reply to my question? Is there a better place / person to get support?
Hello ivozzz.
You can download the update on Steam when you want, we sent in November 2018 the latest version of CYYZ.
Check into your personal Steam account. -
Globall Art
FSMagazin Magazine Edition of February 2019.Posted the latest authoring products Globall Art.
* Toronto International Airport / Canada
* Montreal International Airport / CanadaWe thank all FsMagazin staff for the excellent work.
-
2
-
-
Globall Art
FSMagazin Magazine Edition of February 2019.Posted the latest authoring products Globall Art.
* Toronto International Airport / Canada
* Montreal International Airport / CanadaWe thank all FsMagazin staff for the excellent work.
-
1
-
-
16 minutes ago, fffirefly7 said:
Page 8 of the CYYZ Manual? On a different page?
Hello fffirefly7.
I am not referring to the manual, the links are on page 8 of this topic. -
On 2/9/2019 at 11:05 PM, fffirefly7 said:
Having a problem with the mesh supplied. I have ortho photo installed for this area and everything looks great with the airport however the fencing and some buildings are elevated above the ground.
When I add the supplied mesh file to custom scenery everything is on the ground, great, however now I have lost my ortho for the tile (+43-80). Even tried the mesh in different locations in the scenery_packs, and also tried removing the dsf file in the ortho 43-80 folder with the supplied dsf file. The buildings were on the ground but the ortho was still missing, only auto-gen. For now I'd rather have floating buildings and ortho.
Any ideas?
Also, even with the low res files installed I still find this airport to eat up frames. Unfortunate as it really looks great. Nice job with the sun/ground reflection.
I only have the airport and traffic installed.
I should mention I have a 980ti with three monitors. Fps at cyyz is 8-12 with med settings. At other airports it is 20-25 which I'm happy with.
Hello Friend
Please install Orthophoto provided on page 8. -
On 1/15/2019 at 7:57 PM, YYZ342 said:
Good question. I have CYYZ and CYUL and would love to see the answer to this question. Thnx.
Sent from my iPhone using Tapatalk ProHello.
At the moment we have no forecast for this type of exchange, since the Gates work very well for both scenarios.
Cheers -
4 hours ago, S3rg1o said:
@Richard_Nunes Do SBGL and SBRJ blend perfectly? Aren't there any mesh issues? I'm thinking on buying both off them.
Hello S3rg1o.
Yes, the two scenarios of our authorship are 100% compatible, there are no problems with the mesh.
Follow the step-by-step manual in the installation.Good flights
-
Hello Commander.
The promotion of Christmas Globall Art has arrived.
Org Store
https://store.x-plane.org/GloballArt_c_393.html -
Hello Commander.
The promotion of Christmas Globall Art has arrived.
Org Store
https://store.x-plane.org/GloballArt_c_393.html
-
7 hours ago, ivozzz said:
Richard, any idea why I may be missing the de-ice and West jet buildings?
I
1000 Version
SCENERYSCENERY_PACK Custom Scenery/Aerosoft - EBBR Brussels/
SCENERY_PACK Custom Scenery/Aerosoft - EDDF Frankfurt/
SCENERY_PACK Custom Scenery/Aerosoft - EDLP Paderborn-Lippstadt/
SCENERY_PACK Custom Scenery/Aerosoft - EGLL Heathrow/
SCENERY_PACK Custom Scenery/Aerosoft - LFMN Nice Cote d Azur X/
SCENERY_PACK Custom Scenery/Aerosoft - LFPO Paris Orly/
SCENERY_PACK Custom Scenery/Aerosoft - LPFR Faro/
SCENERY_PACK Custom Scenery/Aerosoft - LSGG Genf/
SCENERY_PACK Custom Scenery/CYOO_Scenery_Pack/
SCENERY_PACK Custom Scenery/CYPQ - Peterborough/
SCENERY_PACK Custom Scenery/CA-CYYZ-AA-Toronto_Pearson_Autogen/
SCENERY_PACK Custom Scenery/CA-CYYZ-A-Toronto Airpot Pearson/
SCENERY_PACK Custom Scenery/CA-CYYZ-B-Toronto Airport Traffic/
SCENERY_PACK Custom Scenery/CA-CYYZ-C-Toronto Mesh/
SCENERY_PACK Custom Scenery/z_Toronto_Ortophoto/
SCENERY_PACK Custom Scenery/FlyTampa_Corfu_Airport/
SCENERY_PACK Custom Scenery/FlyTampa_Corfu_Objects/
SCENERY_PACK Custom Scenery/FlyTampa_Corfu_zMesh/
SCENERY_PACK Custom Scenery/yOrtho4XP_Overlays/
SCENERY_PACK Custom Scenery/Global Airports/
SCENERY_PACK Custom Scenery/Airport Environment HD/
SCENERY_PACK Custom Scenery/HD Forests/
SCENERY_PACK Custom Scenery/ff_library_extended_LOD/
SCENERY_PACK Custom Scenery/R2_Library/
SCENERY_PACK Custom Scenery/ruscenery/
SCENERY_PACK Custom Scenery/world-models/
SCENERY_PACK Custom Scenery/KSEA Demo Area/
SCENERY_PACK Custom Scenery/LOWI Demo Area/
SCENERY_PACK Custom Scenery/OpenSceneryX/
SCENERY_PACK Custom Scenery/X-Plane Landmarks - Chicago/
SCENERY_PACK Custom Scenery/X-Plane Landmarks - Dubai/
SCENERY_PACK Custom Scenery/X-Plane Landmarks - Las Vegas/
SCENERY_PACK Custom Scenery/X-Plane Landmarks - London/
SCENERY_PACK Custom Scenery/X-Plane Landmarks - Sydney/
SCENERY_PACK Custom Scenery/zOrtho4XP_+43-079/
SCENERY_PACK Custom Scenery/zzz_hd_global_scenery4/
Hello
This is correct, but I did not understand the problem ??
Remove Autogen to be lighter if you prefer.Good flights
-
28 minutes ago, ivozzz said:
Thanks! Any way to tell which version I’m running? I didn’t see any improvement . I’m Down To about 18fps with a 1080ti
Hello
The latest version is version 1.4.
With a 1080i card, I have customers reporting 35/40 FPS with high settings.
We have a 1060TI and we have a very good rate of 25/30 FPS with shadow activated and relatively high setting.
With the new version of XP 11.30 Beta we have already had even more performance gains.
Something is wrong with your XP settings, Plugins among others, for your FPS to be low with a 1080TI.Good flights.
-
1
-
-
5 hours ago, ivozzz said:
Hi Richard, how do we update the scenery if it was purchased on steam?
Hi ivozzz
The new version should already be available in your personal Steam account, has already been updated.
good flights
-
18 hours ago, Devils_48 said:
Hello,
Very very nice scenery!! Good Job !!
Question on my side, is it possible to install the autogen without your Ortho files. I tried but Xplane 11 give me an error about missing couples : object/forest/trees….. .obj
so is it me or it's totally normal
thank you
Hello Devils_48
You have to install the World Models library that is associated with self-healing.
-
Just now, MediumRareBaku said:
How is the performance on this with the latest version? I've heard performance with 1.0 was pretty terrible. Has it gotten better?
Hello MediumRareBaku.
Yeah, actually the first version got a little heavy.
But over the weeks we have been able to greatly improve performance.
We had satisfactory results with version 1.3, there were no more complaints.
We are still working on the project to further improve.Good flights
-
2
-
-
7 hours ago, GridiroN said:
CYOW is Ottawa International. CYUL is Montreal international. They are different locations on different tiles. If you are getting this message, it's because your CYOW install is broken. C4XP updated it a while ago and it now requires custom libraries.
Hi GridiroN
This error is not part of our CYUL package.
Seek the developer of this scenario to correct the existing error. -
43 minutes ago, Jeff Boyington said:
About to buy
Is this compatible with Canada Freeware Montreal Scenery?
Hello
We did not test with this scenario.
-
1
-
-
Hello Commander.
We upgraded our X-Plane to the latest 11.30b2 version.
We had a gain of about 8FPS without changing the settings for both CYYZ and CYUL.
Upgrade when they can, but remember this is still in beta.Good flights
-
10 hours ago, Fesi said:
Really like this airport. A CYVR would be great.
One note. I was entering the runway threshold on 6L and had to advance the throttles higher than normal in order to move into position.
Hi, Fesi.
Yes, we can say we're working on it.
On the problem with the taxiways and the lane, it has already been resolved, the path was launched to fix this.
Let's go to the link.
https://www.dropbox.com/s/nq47dity76ru21u/CYUL_Textures_adjusted.zip?dl=0
Installation.
Just unzip to the root folder of the scenario.
X-Plane 11 \ Custom Scenery \ CA-A-CYUL_Montreal_International_Airport
Replace the files.-
1
-
1
-
-
30 minutes ago, grader said:
Richard, I have applied the patch as instructed and there seems to be little change. I find taxiway "A" to be the same. Also the threshold of Rwy 6L and taxiway "B" is the same when travelling east and passing taxiway "E". It's like driving accross a plowed field. It smoothes out at the threshold of Rwy 24R but then the journey down 24R is the same. It also seems that braking action is also poor in all of the described ares. Maybe just my opinion but let's see what others say.
Hello Grader.
You may have done something wrong in the installation.
The problem has already been corrected, we have done a lot of testing and this is ok.
Other customers have already reported that it has been corrected, the aircraft is normally slipping at minimum power, no longer on the Ortophoto texture giving the impression of rolling on "gravel".Good flights.
Toronto Pearson International Airport - CYYZ
in News from Commercial Designers
Posted
Hello ivozzz.
This is caused by the orthophoto you are using from the Toronto (City) region, you can remove it if you want.
No problem with the scenery, just remove ortophoto from the city.
However, this is insignificant if you are inside the aircraft performing the simulation.
Or, from what I see in the image, you have another orthophoto that is causing these conflicts, with the orthophoto of the original scenario.
Good flights.