AUTOMATIC BORING (DRILLING) MACHINE

BIESSE Techno FDT

Condition: used, machine/vehicle number: 005341, Max. panel width: 3200 mm Max. panel length: 1200 mm Fzhf0k0 No of Bottom Units: 6 No of Top Units: 4 Lateral horizontal groups: yes

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit Qz2mqu3 The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Year of construction: 2019, Condition: excellent (used), Functionality: fully functional, TECHICAL SPECIFICATIONS • 2 pcs. of Horizontal Units. Right and left. Each with 2 boring chucks with 11 spindles activated by a 1.5 HP motor. Total 4pcs. of boring chucks; • 4 pcs. Of Bottom Vertical Head - width 96 mm - with 2 motors (1.8 hp each). Pneumatically activated boring cycle. Total 8 pcs. of boring chucks; • 2 pcs. Of Top Vertical Head - width 96 mm - with 2 motors (1.8 hp each). Pneumatically activated boring cycle. Total 4 pcs. of boring chucks; • Hydraulic brake for the adjustment of the boring speed per unit; • Nylon pieces on side bar clamps; • Manually overturning double top clamp equipped with security pin; • Couple of digital inverters for the continuous adjustment of the speed of the transport system motors from 35 to 75 m/1'.* It requires the double section conveyor; • Motorized central conveyor with single belt and idle wheels at infeed/outfeed - total length 3119 mm - assembled on bottom vert. Head; • Overturning outfeed transfer - length = 670 mm - driven by the boring machine; • Chromium-plated side guides for 670 mm long infeed and outfeed transfer.* It requires the 670 mm long overturning outfeed transfers; • Equipment for chip transport; Csh8rd2t • N.8 Prearrangements for the fitting of horizontal boring aggregates on bottom and/or top operating units.- To be selected in unit quantity; • Special front pushers for panels with delicate profiles; • Device for the feeding of heavy panels and/or panels profiled or coated with delicate material; • Device for the working of narrow pieces* It requires the code of the inverters on the transport system.- Compulsory selection for length (X) / width (Y) ratios; • spindle chuck, 32 mm. continuous center distance, driving spindle the 6th; shaped chuck body. - Quick change chuck; • Quick change drill-bit holder for RH spindle; • Quick change drill-bit holder for LH spindle; • EC-UKCA safety devices, with fixed side panels and programmable photocell barriers. For a machine of the Techno series; • Personal Computer Desktop and Editor Module for a machine with manually positioned axes;

Year of construction: 2004, Condition: excellent (used), I sell the throughfeed drilling machine with BIESSE TECHNO FDT. Year 2004 Sxitek Working area: X: 215 - 32.000 mm Y: max. 672 mm (horizontal spindles 24 pcs. per 32mm offset) Z: Workpiece thickness: 9 - 65 mm min. X middle distance between vertical units: 96 mm Configuration: 4+4 motors from under 1 bottom jumping milling unit 1+1 motors from sides per 24 spindles / 32mm 0 motors from back 4+4 motors from top 4 pcs. material pressure from top Very good condition. Available immediately. One more BIESSE TECHNO FDT in different configuration available from line. Price on agreement.

Condition: used, machine/vehicle number: 007146, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 7 Bku3zbew8p3 No of Top Units: 2 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: KZ0040) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer Hvprxw9 KZ0041) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - N° 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - N° 7 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - N° 4 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - N° 5 top pressing devices + N° 2 endless screws to evacuate the wastes. With CNC NC 500 (Software Tooling System + Woodmaster) KZ0042) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 5 top pressing devices + N° 2 endless screws to evacuate the wastes. KZ0043) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. KZ0044) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: used, machine/vehicle number: 006738, Position 1: Panel Feeding and Loading BIESSE-STREAM + TECHNO FDT Position 2: Double Edgebanders BIESSE-STREAM + TECHNO FDT Position 3: Panel Turning Device BIESSE-STREAM + TECHNO FDT Position 4: Double Edgebanders BIESSE-STREAM + TECHNO FDT Nb8i7ke9bh Position 5: Panel Turning Device BIESSE-STREAM + TECHNO FDT Position 6: Automatic Drilling Machine BIESSE-STREAM + TECHNO FDT Position 7: Automatic Drilling Machine BIESSE-STREAM + TECHNO FDT Position 8: Panel Turning Device BIESSE-STREAM + TECHNO FDT Position 9: Splitters BIESSE-STREAM + TECHNO FDT Position 10: Panel Stacking and Offloading BIESSE-STREAM + TECHNO FDT

Condition: excellent (used), Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 6 Ci70izgp Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27.7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: used, machine/vehicle number: 006749, Position 1: Panel Feeding and Loading BIESSE-STREAM + TECHNO FDT Position 2: Double Edgebanders BIESSE-STREAM + TECHNO FDT Position 3: Panel Turning Device BIESSE-STREAM + TECHNO FDT Position 4: Double Edgebanders BIESSE-STREAM + TECHNO FDT Position 5: Automatic Drilling Machine BIESSE-STREAM + TECHNO FDT Bwev7y3bys Position 6: Automatic Drilling Machine BIESSE-STREAM + TECHNO FDT Position 7: Panel Turning Device BIESSE-STREAM + TECHNO FDT Position 8: Automatic Drilling Machine BIESSE-STREAM + TECHNO FDT Position 9: Splitters BIESSE-STREAM + TECHNO FDT Position 10: Brushing Machines BIESSE-STREAM + TECHNO FDT Position 11: Panel Stacking and Offloading BIESSE-STREAM + TECHNO FDT

Condition: excellent (used), Numerical Control Type NC 400 (Software Tooling System) N° 2 Through-feed motorized conveyoring belts N° 2 Horizontal units/supports N° 2 Drilling heads for each horizontal unit Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) N° 6 Bottom vertical units/supports N° 2 Drilling heads/blocks for each bottom vertical unit N° 2 Top vertical units/supports N° 2 Drilling heads/block for each top vertical unit N° 4 Vertical top pressure clamps N° 2 Motorized endless screws to evacuate wastes/chips Digital quota (axes) display Total installed power (Kw) 53 The CNC controls the movement (X axe) of the mobile horizontal unit G0t7cjf The CNC controls the movement (Y axe) of the stops

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. Csdkhtdn0 B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 Feeding speed (m/min) 35 - 75 (ca.) Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 Bottom vertical units/supports (No.) 4 Drilling heads/blocks for each bottom vertical unit (N°) 2 Top vertical units/supports (No.) 3 Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (No.) 4 Bfbpdg9jbc Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 46.5 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the reference stops

Condition: excellent (used), FULL LINE of Double-side Sizing & Edge Banding with Multi Borers, max working width mm 3200. Composed of the following machines: KZ0125A) Panel infeeder (drop system), with motorised roller conveyor KZ0125B 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima Concept/II/330/A/R3 KZ0125C) "IMA" corner connection unit with "hopper feeder" (panels fall directly onto the feeding chains of the 2nd Double-side Sizing & Edge Bander) KZ0125D) 2nd Double-side Sizing & Edge Bander "IMA" Combima Concept/II/390/B/R3 Ccoqowzqyx KZ0125E) "BIESSE" through-feed multi-borer Mod. Techno FDT (2+6+3 units) KZ0125F) "BIESSE" through-feed multi-borer Mod. Techno FDT (2+6+3 units) The line is still installed at the user's premises and can be viewed by appointment. All the technical details are avaiable upon request

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring Be0e8twgln belts out-feed from 2nd multi borer (and dowels inserter)

Condition: excellent (used), Numerical Control Type NC 400 (Software) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Bslmxallkp Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 48 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates Cqtfogxo SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 Feeding speed (m/min) 35 - 80 (ca.) Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 Bottom vertical units/supports (No.) 5 Drilling heads/blocks for each bottom vertical unit (N°) 2 Top vertical units/supports (No.) 2 Dwvvhkxwj Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (No.) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the reference stops

Condition: excellent (used), Numerical Control Type NC 400 (with work cycle management software) Through-feed motorized conveyoring belts (No.) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 No. 4 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 D0f2oe No. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 25 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops OPTION: Front feed hopper/loader (for narrow pieces: Min 60mm - Max 260mm)

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. N. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 x HP 1,8 Jxw2xq Max. working width (mm) 3200 - Min. working width (mm) 215 N. 7 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 5 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

total width: 1,000 cm, total length: 3,180 cm, Year of construction: 2007, Condition: good (used), Functionality: fully functional, Biesse Techno Line - Year of construction 2007/2012 3 Techno FDT throughfeed drilling machines with feeding and stacking Consisting of: 1. cross travel carriage, Wamhoff, year of manufacture 2012 (picture 1) 2. loading, Wamhoff crosswise version, year 2012 (pictures 1 and 2) 3. Techno FDT BJ 2007 (pictures 3 and 4) 4. Techno FDT BJ 2007 5. Techno FDT incl. dowel unit 2007 (image 5) 6. intermediate transport with hook turner, manufactured by Wamhoff, year 2012 (picture 6) 7th Wandres cleaning unit, year 2006 (picture 7) 8. turning station, manufactured by Wamhoff, year 2012 9. stacking unit, Wamhoff, year 2012 (pictures 8 to 10) The machine is supplied with - All existing drilling gears (Fig. 12) Remarks: - Chip conveyor belts are partially defective - only four of the six dowel chambers are in operation and can be used without repair Not included in the price and can be purchased separately: - Various drill bits of all types and quality - Drill holders at least 1,000 pieces - Cross-travel carriage (Fig. 10, not included in the layout) - Various spare parts (list follows) L0h3v70pyt Machine is to be dismantled and loaded by the purchaser.

Condition: used, machine/vehicle number: 006163, Max. panel width: 3200 mm No of Bottom Units: 3 Mninlk29 No of injectors: 6

Condition: excellent (used), Numerical Control Type NC 400 Deluxe Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 1 Splindles for each horizontal drilling head (N°) 20 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) Nroolvy8 No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 3 Transport belts to evacute chips (wastes) (N°) 2 Total installed power (Kw) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) Ccmfstl97p KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Double-side working machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting Electronic Programmer RT 486 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) No. 6 Left-side + No. 6 Right-side Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) 883xywkm3 Bottom vertical units/supports (N°) 4 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Total installed power (Kw) 11,5

Condition: excellent (used), Electronic Programmer NC 400 Software Biesse Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) N. 5+5 Max. working width (mm) 3200 Nmwgh Min. working width (mm) 235 Bottom vertical units/supports (N°) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Motorized carpet to evacuate chips and wastes The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops