TIG-Welding System with Turntable

ESS 211 DTG / DT 50 / PS 8

Year of construction: 1986, Condition: used, Welding turntable ESS type DT 50 No. 86 / 1125 Year of construction 1986 max. load 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm Control voltage 24 Volt Motor power 100 watts Z2eyk2jpo Mains connection 220 Volt, 50 Hz. - Faceplate can be swiveled continuously through 180° in position - Speed control via rotary potentiometer - Clockwise/anticlockwise rotation - Foot switch - 2-stroke and 4-stroke operation - Sliding contact for ground up to 200 Amp. - New ESS PS3 control system from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition

Condition: used, Container turning device, welding turning device, welding turning device, welding device, welding turning table, welding turning and tilting table, welding turning device, welding turning tilting table By29pvzjpj -Manufacturer: ESS, double welding turning device, swiveling -Turntable distance: 975 mm -Program control device: 2x ESS type PS 2-3 -Direction of rotation: right / left rotation -Welding smoke extraction pipe: without welding smoke filter, can be supplied at an extra charge -Dimensions: 2000/1400 / H1950 mm -Weight: 552 kg

Year of construction: 2023, Condition: new, New machine Year of construction 2023 Fmgf3ck07 Equipment and technical data: - Basic machine SCX 8 11bar SC2 400/3/50 screw compressor with integrated refrigeration dryer and compressed air tank - Electrical connection 400V / 3 / 50Hz - Max. Max. operating overpressure 11.0 bar - Connection to control system not provided - Fluid type Compressor SIGMA FLUID MOL Availability: short term Location: Hochheim

Condition: excellent (used), Faceplate diameter 500 mm KKG 8 Bonus diameter 139.719 mm bolt circle diameter 171,4 mm 4 studs M 16 jaw width 50 mm jaw height 65 mm 4 T grooves 18 mm wide face plate height 100 mm n1/min. max.475 Cuzlpxqmiw Weight 100 kg

Condition: used, Servo motor, electric motor, direct current motor, direct current generator, electric motor with direct current generator -Spare part: comes from a Scharmann boring mill -Manufacturer: Kessler, electric motor with direct current generators -Three-phase motor type: DM21-16 32 kW 2880 rpm om Gen. Type: G 50/42/1 6/18 kW om Gen. Type: G 44/14/2 8.2 kW -Technical data: see photos nameplates Br83ij3t8y -Dimensions: 1750/580/H540 mm -Weight: 886 kg

Year of construction: 2012, Condition: ready for operation (used), Number of filling stations: 8, throughput: 30 cycles/min, connected load: 6kW, with heated double jacket on the storage container, accessories, filling heads, screw conveyor, conveyor belt and documentation, on-site inspection is possible. 0trgu9qdk

Year of construction: 2014, Condition: used, Please contact us if you can't find what you are looking for. Dkg0ad

mileage: 126,700 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,100 kg, first registration: 09/2018, emission class: euro6, color: red, number of seats: 2, Condition: used, Equipment: ABS, Air conditioning, Central locking, Navigation system, Parking heater, Soot filter, Citroen Jumpy 2.0 HDI 150 PS 2x sliding doors 6-speed manual gearbox, air conditioning, trailer coupling 2,500 kg, blind spot assistant, cruise control, radio with navigation system and digital radio DAB, connecting box, touchscreen, parking aid front and rear incl. reversing camera, auxiliary heating with remote control, EURO 6, rear hinged doors, 2xel. Power windows. I072xuvx9

Year of construction: 2022, Condition: as good as new (ex-display), Digital textile printer SEll OUT Hu09u3o

Condition: excellent (used), machine/vehicle number: 2790, Machine after repair,ready to work Blxd377t3gv

Year of construction: 2014, Condition: new, machine/vehicle number: RE-HU-2014-1603-1, Filter plate specification 250X250mm Filtering area 0.56m2 Number of filter plate 8pcs of chamber plate including one tail plate and one head plate Filtering pressure 0.6-1.6Mpa Thickness of filter cake 25mm Filtering chamber volume 7L Filtrate discharge Open type outlet Construction material for framework Main material for framework is carbon steel. Contact parts in PVC or SS. Material for chamber plate is PP Working temperature <90 ℃ Overall dimension 960X400X350mm Weight 350KG Buy or rent: Additional information: Please order before please, because the demand is very high. Hmkgxvgys

Condition: used, 2-column screw press, probably WMW type SS 50 Technical data: Pressing force approx. 5 t - 10 t Handwheel diam. 800 mm Projection between the columns 400 mm Spindle diam. 50 mm Table size 350 x 440 mm Hole in table diam. 100 mm Plunger 130 x 110 mm Installation height 300 mm External dimensions L x W x H 900 x 500 x 1670 mm Base 700 x 600 mm Weight 350 kg A mounting hole diam. 25 mm, 50 mm deep is available. A corresponding mandrel is clamped by means of a lateral pressure piece. Rkgfwirwpj Used, in good condition

Year of construction: 1992, Condition: used, pressure 0050 t chamfer lenght 2000 mm distance between columns 1600 mm throat 400 mm stroke of the table 100 mm Control Delem DA58 Fefeo0fbv total power requirement 7 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 2,7 x 2,0 x 2,45 m Machine has back gauge and many tooling sets.

Year of construction: 2020, Condition: refurbished (used), Dryer conveyor for digital direct-to-garment (DTG) printing: ACE 950 by Chiossi & Cavazzuti Hot air dryer for DTG printing like new, excellent condition. Double belt conveyor. Year 2020. Textile oven almost new, overhauled and cleaned. Sold new for just over €15,000. 3ls0qier Delivery not included - On request Characteristics of the Chiossi & Cavazzuti Ace 950 drying tunnel: - MAX POWER: 14 KW - FIELD OF APPLICATION: Textile digital printing, pre-treatment drying for dark and light textiles, water-based digital ink drying. - DRYING SYSTEM: Warm air circulation - DRYING SURFACE: 2000 x 950 mm - MAX PRODUCTION: 180 pieces/h Possibility of offering a complete set with a DTG Brother, Epson, Kornit printer and a Schulze PretreatMaker IV pretreatment machine depending on availability. Electric Modular Dryer Forced Hot Air System Drying Area: 2000x900 mm Specifically designed to cure and dry digital printing on fabrics, the massive advantage of these dryers is the high volume of forced air circulation: this facilitates and accelerates the evaporation of water-based digital inks with unmatched results on the finished garment in medium-long drying process.

Year of construction: 2024, Condition: new, neu 2024 7306 prompt, Zwischenverkauf v Italien 12700 € 260.35 € 1 50 to horizontal verschiebbar 350 mm 900 mm 900 mm max. 9 mm/s 0,75 kW 1700 mm 700 mm 2100 mm 720 kg 550 mm The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. Bgveautcmre The cylinder can be moved sideway by handwheel (only "M" versions)

compressed air connection: 8 bar, pressure: 8 bar, total width: 131 cm, total height: 506 cm, overall weight: 649 kg, temperature: -20 °C, operating pressure: 8 bar, tank capacity: 5,000 l, pressure (max.): 8 bar, Year of construction: 2024, Condition: new, Functionality: fully functional, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. Doeefx We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.

Condition: good (used), Code: 0133 Brand: STROMAB Model: PS/50 F - CE Standard Manual pendulum saw for cutting boards, wood packaging, furniture, window frames and various - CE Standard Technical data: Blade diameter mm 500 F30 Blade speed rpm 2800 Motor Hp 7,5 Cutting capacity mm 510 Cutting depth mm 145 Manual feed Suction mouth diameter mm 150 Infeed roller table mm 1500 Outfeed roller table mm 1500 Weight kg 350 Bljgaeriyc2

Year of construction: 1992, Condition: used, Functionality: fully functional, TECHNICAL DETAILS Pressure: 50 t folding length: 2000 mm Stand width: 1600 mm Projection: 400 mm Table stroke: 100 mm Control: Delem DA58 MACHINE DETAILS Total power requirement: 7 kW Blovnhen8oj Machine weight: approx. 3.6 t Space requirement: approx. 2.7 x 2.0 x 2.45 m EQUIPMENT back gauge Some tool sets

Year of construction: 1993, Condition: good (used), Press force 800 kN bending length 3050 mm ram stroke approx. 160 mm Zcifoshw Installation height up to 340 mm Dimensions LxWxH: 3750 x 1600 x 2850 mm Weight approx. 7500 kg including tools (see photos)

Year of construction: 2015, Condition: like new (used), COMPLET LINE M&R M&R RED CHILLI 50/70 FUSION ELECTRIC PRINTING COVEYOR DRYER SCREEN FRAMES 150 PC Blehecex 8 PALETTS 50/70 8 PALETTS 40/56

Year of construction: 2000, Condition: used, COMEC CLAMP mod. ST/8 2P-2500, year 2000 (CE) Useful working measurements cm. 250 x 250 Bkpg3ltrqwz

Condition: used, Gear motor electric motor -Speed: 30/50 rpm -Power: 0.22/0.9 kW Qlvu2t9bl -Construction: B3 angle -Diameter shaft: Ø 38 mm -Protection class: IP 65 -Dimensions: 760/250/H400 mm -Weight: 65 kg

pressing force: 150 t, total width: 6,050 cm, throat depth: 350 mm, overall weight: 19,500 kg, Year of construction: 1985, Condition: used, Hydraulic CNC press brake EHT type EHPS 15-50 + 2H500 Year of manufacture 1985 Technical data: Pressing force 150 t Working width 6050 mm in total clear stand width 3050 mm throat 350 mm ram stroke 220 mm Weight approx. 19500 kg Drive power 18.5 kW with - CNC control CYBELEC DNC 60 - Tools Underfloor machine Bhknrhua9g3 used, in good condition Price ex site - without disassembly!

grinding wheel width: 250 mm, grinding wheel diameter: 500 mm, motor power: 22 W, total width: 2,500 cm, total length: 2,300 cm, grinding diameter: 100 mm, input power: 35 kW (47.59 HP), grinding length: 250 mm, overall weight: 5,600 kg, workpiece diameter: 100 mm, Year of construction: 2011, operating hours: 11,542 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 5306, 4-lane feeding, fully automated C3pzrr0j Stereization Siemens CNC CNC dresser few operating hours

Year of construction: 1992, Condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical data: - max. working length 1250 mm - bar passage 1050 mm - max pressing force 80 t - stroke 250 mm - bar overhang 300 mm - max. installation height between table and press beam 560 mm - lifting speeds - down speed idle max 100 mm/sec. - Up speed 100 mm/sec - Pressing speed max. 12 mm/sec. - Total drive power 15 kW - space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - with: - CNC - control CYBELEC DNC 7400 PSGY - controlled X - axis back gauge 5 - 1000 mm - Z - axis pneum. height adjustable in three steps - manually movable and foldable stop fingers - controlled pneumatic die displacement - hydr. tool clamping - manual crowning - 2 pieces support arms R80chmvyi - sharpening tool divided H 320 x L 1000 mm - deer foot tool H 320 mm x L 1000 mm - universal die L 1000 mm