Tube Bundle Connectivity - Emtelle Scandinavia A/S

FTTX SYSTEM CATALOGUE 2013 

I N N O V A T I O N A N D F L E X I B I L I T Y

Table of Contents 

from Emtelle .................................................1 

– the optimal FttX solution .........................2 

• Fibre-to-the-Curb (FttC) applications .........................4 

• Fibre to-the-Home (FttH) applications .......................5 

• Multiple Dwelling Unit ..............................................6 

• Aerial applications .....................................................6 

• Campus/Business Park applications ...........................7 

• Telemetry ...................................................................7 

FttX Installation Techniques ...............................................8 

Customers .........................................................................9 

• Military ......................................................................9 

• Transportation Departments ......................................9 

• Housing Developers .................................................9 

• Universities, Hospitals, Airports ..............................10 

• Municipalities .........................................................10 

• Utility Companies ....................................................10 

• Telecom and Next Generation Network Operators ...11 

• Installers .................................................................11 

FttX Global Projects .............................12 

Fibre Products ............................................13 

Microcable Fibre Unit (FU) ........................14 

Blown Fibre Mini Cable .............................18 

Tube Bundle ................................................21 

Tube Bundle .....................................................................22 

Loose protected microduct ..............................................23 

Microduct Primary Tube ...................................................24 

Dual Duct ........................................................................25 

Triple Duct .......................................................................25 

Multi-drop .......................................................................25 

Tight Protected Microduct ...............................................26 

Direct Bury metal free (DBmf) ..........................................27 

Direct Bury ......................................................................31 

Direct Install (DI) .............................................................32 

Low Fire Hazard (LFH)......................................................33 

Aerial ...............................................................................34 

Special Products ..................................................................... 35 

Ancillary Products ............................................................39 

Handling guidelines for Loose Protected Microducts .......40 

sub-duct .....................................................41 

Accessories .................................................45 

Kitting .............................................................................46 

Access Chambers .............................................................46 

Aerial ...............................................................................51 

Tube Bundle Connectivity - External .................................53 

Tube Bundle Connectivity - External to Internal ................59 

Tube Bundle Connectivity - Internal ..................................60 

Fibre Connectivity ............................................................61 

Connectors ......................................................................72 

Sub-duct Accessories .......................................................76 

Installation Equipment ...........................79 

Fibre Unit Blowing Equipment .........................................80 

Fibre Unit Blowing Equipment Ancillaries ........................80 

Fibre Unit Blowing Equipment Spare Parts ........................84 

Fibre Unit and Mini Cable Equipment ...............................86 

Mini Cable Blowing Equipment .......................................88 

Blowing Equipment Ancillaries .........................................92 

Tools and Consumables ...........................93 

Tools ...............................................................................94 

Consumables ................................................................101 

Fibre Restraint Methods ................................................102 

Training ......................................................105 

Emtelle Offices ..............................................................109 

Terms and Conditions of Sale of Goods ..................110 

Index ................................................................................112 

This document is protected by copyright © Emtelle UK Limited [2012]. The products depicted are protected by intellectual property rights. Any 

unauthorized copying of this document or of our products is prohibited and Emtelle UK Limited will take action to prevent any infringement of its 

rights and to claim damages for the loss that it suffers.

Fibre 

Products 

page 13 

Tight ht Protected Pr 

Microduct 

page 26 

Tight 

Access 

Protected Chamber 

Microduct 

page 26 

DBmf 

Heavy-Wall 

Bundles 

page 28 

PoP 

32/26 HDPE Drop Duct 

page 41 

Customer 

Lead-in Point 

page 59 

Duct 

H-Branch 

page 52 

Protected Connector 

page 70 

Tube Distribution 

Closure 

page 51 

FROM EMTELLE 

Welcome to Emtelle 

Introduction 

The history of Emtelle and the history of telecommunications display strong parallels: as the infl uence of telecommunications spread worldwide, 

we responded by expanding our global operations; as technology allowed users easier access to a wider array of information, we eased our own 

customers’ access to highly fl exible networks; as telecommunications providers and users grew more sophisticated, so did our response to their 

requirements and expectations; and as the power and diversity of telecommunications technology evolved, our portfolio of products and services 

did more than keep pace – it led the way. For the last twenty-plus years, the world of telecommunications has inspired Emtelle to create innovative 

technologies, products and business practices. We’re committed to maintaining that win-win relationship with our customers far into the future, 

and back up this commitment with high-quality training programmes (see pages 105 to 107), ISO 9001, ISO 14001, OHSAS 18001 and PAS 99 

certifi cation, and a Corporate Social Responsibility policy that details the company’s ethical responsibilities in all its activities. 

Our core business sectors 

Emtelle can point to many years of experience and success in its two core business sectors: FttX (Fibre-to-the-X), where our renowned 

air blown fi bre technology is used in numerous high-bandwidth applications; and Infrastructure, where we deploy our ducted network solutions for 

Telecom, Power and Geothermal applications, among others. 

To maximise its impact in the global market, Emtelle has identifi ed those 

areas of the world where activities in the above-mentioned sectors offer 

the greatest potential for development: North America, Continental 

Europe, the UK and the Asia Pacifi c region. Our objective is to intensify 

our activities in these regions, establishing ourselves as the company of 

choice by offering network solutions that optimise cost of ownership of 

the network and maximise both performance levels and revenues. 

FttX Solutions 

Emtelle’s passive infrastructure system has seen the 

company become the world leader in air blown fi bre technology, with 

reputable references available from Singapore to Australia, Sweden 

to Greece, Mexico to the USA (see page 12 for a full list of Emtelle’s 

FttX global projects). Directly or indirectly present in all important FttX 

markets worldwide, Emtelle produces a very small, lightweight, yet 

extremely robust passive infrastructure system based on microducts, 

into which Emtelle-produced fi bre units are later blown in (page 2). 

1:32 Splitter Dome 

page 64 

Drop Tube 

PoP 

Inline Straight Tube 

Jointing Closure 

page 54 

Installation 

Equipment 

page 77 

Installation 

Equipment 

page 77 

PoP 

Customer 

Connection Point 

-Fixed Fibre Drop 

Customer Point 

-Upgradeable Fibre Drop 

(pre-installed) 

Access 

Chamber 

page 46 

Loose Protected 

Microduct 

page 23 

Rack Mount 

Splitter 

Customer 


page 62 

Pre-Connect Fibre 

page 17 

PoP 

PoP 

Street Cabinet 

Internal 

Y Branch 

page 61 

Indoor Tight 

Protected Microduct 

page 33 

PoP 

Tight ht Protected t 

Microduct 

MDU Cabinet 

Railway Station 

Fibre Unit 

Minicable 

Accident 

I90 closed at J32 

Accident 


Accident 


Customer Connection Point 

page 62 

Splicing Unit 

Internal Y Branch 

page 61 

Traffic Control 

Center 


Closure 

DBmf 

PoP 


1DB,5/3.5mm 

Refinery 

Windfarm 

Splice Dome 

To Gantry / Station 

Tight Protected 

Microduct 


Microduct 

32 - 26 mm 

Cable in Duct 


Microduct 

FTTX Solutions 

Infrastructure Solutions 

For many years now, Emtelle has been manufacturing PVC-U 

(Unplasticised Polyvinyl Chloride) main duct and HDPE (High-Density 

Polyethylene) duct- and sub-duct solutions for the Telecom and Power 

markets in the UK and Ireland. 

The PVC-U ducts are available in outer diameters (ODs) from 30mm all 

the way up to 250mm. The HDPE ducts (low, medium and high grade) 

are available in sizes from 3-250mm OD. 

Our larger-diameter ducts complement our product offering for the 

Telecom and Power markets. A full range of bends, connectors and 

ancillary products is available to meet all system requirements. 

I N N O V A T I O N A N D F L E X I B I L I T Y 

At Emtelle we strive to improve our products every day and therefore strongly suggest that all new orders and specifications be confirmed by your Emtelle representative. The current specifications may be different 

from those listed in our latest catalogues, which are limited by publication date. For the latest specifications please visit our website at www.emtelle.com or contact your Emtelle representative. 

Fibre to 

the Curb/ 

Node 

Fibre to 

the Home/ 

Multiple 

Dwelling 

Unit/ 

Building 

Telemetry/ 

Long 

Distance/ 

Intelligent 

Transport 

System 

Telecoms 

Infrastructure Solutions* 

Power 

Geo 

Thermal 

Water 

Industrial 

General 

Purpose 

*We have a separate catalogue dedicated to our Infrastructure Solutions. 

1 

Air Blown Fibre 

FttX 

Customers 

Fibre Products 

Tube Bundle 

Sub-Duct 

Accessories 

Installation Equipment 

Tools 

Training 

Emtelle Offi ces 

Terms & Conditions

Air Blown Fibre FttX Customers Fibre Products Tube Bundle Sub-Duct Accessories Installation Equipment Tools Training Emtelle Offi ces Terms & Conditions 

– the optimal FttX solution 

Easier, quicker, more effi cient and extremely fl exible 

Air blown fi bre (as used by Emtelle’s technology) is an 

integral part of FttX solutions. The strain-free method of 

installing fi bre optic cables and fi bre units in microducts relies on the 

fl ow of compressed air passing over the entire length of the cable to 

create a fl uid drag, which gently carries the cable down the microduct. 

In addition, a set of rollers or a caterpillar drive typically pushes the fi bre 

optic product into the microduct. 

Suitable for numerous applications and customers, air blown fi bre has 

become the preferred installation method for those who value reliability, 

cost-effectiveness and fl exibility. The development of air blown fi bre 

has revolutionised the design of fi bre optic products, resulting in a new 

generation of minicables that take up less room and need no heavy 

reinforcement. In addition, these developments have reduced the costs 

of the fi bre products and the microducts into which they are installed. 

Emtelle’s air blown fi bre system is suitable for a wide 

range of applications, including: 

• Fibre-to-the-Home 

• Multiple Dwelling Units (MDU) 

• In-Building 

• Fibre-to-the-Curb/Node 

• Campus/Business Park 

• Mobile Telephone Mast Connections 

• City/Metropolitan 

• Long-Distance 

• Telemetry and Intelligent Transport systems 

This diversity of applications is constantly growing, driven by the 

tremendous fl exibility of and its ability to deliver scalable 

and reliable end-to-end solutions that fi nancially benefi t the network 

operator and investor. To explore the benefi ts of in greater 

detail, let’s focus on two applications where FttX technology is gaining 

ground worldwide: 

Multiple Dwelling Units (MDU) 

MDUs are becoming an increasingly large market segment for broadband 

services. In the USA, 25% of people live in MDUs; in Europe, the fi gure 

is 50%; in Latin America and Asia, more than 75%. Worldwide, there are 

currently 670 million MDU-based living units, a number that will only 

rise as populations migrate to urban areas. As well as encompassing 

a large array of building sizes and architectures, MDUs also involve a 

diverse group of stakeholders, including investors, operators, customers, 

installers and homeowners. Some of these groups will largely have 

shared priorities. For example, investors and operators will be looking 

for a broadband network that can: maximise revenues; minimise initial 

capital expenses and ongoing operating expenses. Installers will be more 

interested in the ease with which the infrastructure can be set in place, 

1 TNO (2008), Comparative model for optical fi ber infrastructure 

2 I N N O V A T I O N A N D F L E X I B I L I T Y 

FROM EMTELLE 

modifi ed, maintained and expanded. And customers and homeowners 

will certainly want shorter installation times, minimal intrusion, solid 

safety assurances and aesthetically pleasing solutions. Uniquely among 

FttX technologies, Emtelle’s solution addresses every one 

of these issues, ensuring that the best interests of all stakeholders are – 

and continue to be – met. 

Customer Connection Point - 

Fixed Fibre Drop 


Upgradeable Fibre Drop 


Telemetry 

Telemetry involves the long-distance monitoring and management of 

equipment used in, for example, wind farms and oil and gas pipelines. 

Its many benefi ts include improved security, faster response times, the 

more effi cient use of personnel, safer working conditions, minimal 

escape of harmful substances, and maximum effi ciency. Emtelle’s 

solution is ideally suited for telemetry applications. 

For one, optical fi bre can easily handle telemetry’s high-bandwidth 

demands, maximising network uptime and reliability, and reducing 

the need for the auxiliary power cables required for signal boosting. 

And thanks to new trenching technologies, network components can 

be in the ground much more quickly – a vital characteristic in these 

often time-critical applications. In addition, a recent report 1 showed 

that the long-term costs of Direct Buried Duct technology – as used 

with – were decidedly lower than other installation 

methods, taking into consideration the initial investment as well as 

events that happen over the network’s lifetime. 

32 - 26 mm 

Cable in Duct 

Low Rise / Garden 

Style MDU 

(Rapid Fit Installation) 



Pre-Connect 

Fibre 

Customer 

Connection 

Point 

Internal 

Y Branch 

Type B 

Terminator 


Closure 

Accident 


Accident 


Accident 


Duct Plug 

12 Way DI 

5/3.5mm 

3 4 

2 1 2 

1 1 1 3 

2 2 4 

Indoor Tight 


Medium Rise MDU 

(Direct Microduct Routing) 


Center 

1 2 

1 1 

MDU Cabinet 

Fibre Node 

4 1 

3 

City 

POP 

7 Way DI 

5/3.5mm 

1 1 

PoP 

2 Way DB 

5/3.5mm 

High Rise MDU 

(Shared Microduct Routing) 


Microduct 

Dome Splice 

Enclosure 

4 Way 

Opticom 

Installation 

Equipment 

Refinery 

Customer 

Connection 

Point 

Splicing Unit 

Internal 

Y Branch 

Loose 

Protected 

Microduct 

PoP

Fibre to 

the Curb/ 

Node 

PoP 

Capital Expense 

Fibre to 

the Home/ 

Multiple 

Dwelling 

Unit/ 

Building 

FROM EMTELLE 


Reduced CapEx and OpEx, increased return on investment 

Emtelle’s FttX solutions enable investors to reduce Capital and 

Operating Expenses (CapEx and OpEx), while maximising revenue 

and market capitalisation. With Emtelle’s passive networks, in 

the period from 2005-2009, CapEx per connected home has been 

reduced by more than 35%. This reduction has been achieved as a 

result of : easier and faster installation together with lower skill sets 

and reduced manpower requirements. 

 

1300 

1200 

1100 

1000 

900 

800 

700 

600 

500 

400 

300 

200 

100 

Another innovative way in which Emtelle reduces CapEx for 

its customers is through Kitting. This is the process of putting 

products together as customised, preassembled units, making their 

deployment easier and faster (see page 46). In addition, because 

network maintenance and modifi cation can be done more quickly, 

on-going OpEx is also signifi cantly lower. 

Revenue 

FTTX Solutions 

Telemetry/ 

Long 

Distance/ 

Intelligent 

Transport 

System 

2003 

CUSTOMER 

NEEDS / EXPECTATIONS 

Telecoms Power 

Product Innovations s 

Operating Expense 

FTTX reduces 

OpEx 

Marketing g g& g & Scalability 

Services s Reliability 

Geo 

Thermal 

Labour 

Passive System Components 

Market 

Capitalization 

Infrastructure Solutions 

Water 

KNOWLE LE LEDG DG DGE EX EXPERIENCE 

= Capital Expense per home connected 

Industrial 

General 

Purpose 

Reduced CapEx 

2004 2005 2006 2007 2008 2009 

Source: Emtelle 

-37% 

In terms of revenue, this 

superior level of fl exibility 

enables new users and 

applications to be easily 

incorporated into the 

infrastructure. When such 

developments occur, fi bre 

can be blown out of and 

into the existing ducts in 

direct response to customer 

requirements, enabling the 

immediate provision of 

services that will generate 

immediate revenues. 

A concern for investors 

is market capitalisation: 

whether the network will be 

marketable in the future. The 

good news – in addition to 

the network’s fl exibility – is 

that a -based network performs reliably day in, day 

out. With this level of reliability – and the network’s scalability – 

investors can be much surer that their investment is future-proof, 

and that their network will remain an attractive and valuable asset 

far into the future. 

The single source for your FttX solutions 

Loose protected microducts: suitable for the installation of higher 

fi bre count cables, comprising 24-216 fi bres with a central strength 

member. They are deployed upstream 

in the network’s backbone 

and feeder part, allowing large fi bre 

counts to be distributed quickly and 

easily to multiple locations. 

Tight protected microducts: suitable for the installation of fi bre units 

containing between 1 and 12 fi bres as well as minicable (24-216 

fi bres). In 3mm and 5mm microduct 

diameters the bundles can contain 

up to 24 individual microducts. They 

are usually deployed in the access 

part of the network – in FttH and 

Campus applications, for example. 

The company is at the leading edge in the design, production 

and delivery of passive network solutions, and are renowned for 

providing exemplary technical support. The companies’ merger has 

created a one-stop source for all applications, providing customers 

with great peace of mind in the knowledge that all their network 

requirements can be delivered seamlessly by one company. 

Committed to being a leader in the FttX industry, Emtelle is 

deploying its world-class expertise, experience and resources to 

develop solutions for up-and-coming applications, such as MDUs, 

Telemetry and Intelligent Transport Systems (used to monitor and 

manage road and rail traffi c). By exploring such markets and devising 

application-specifi c solutions, Emtelle can further refi ne and broaden 

its solution, creating exciting new possibilities for the 

future, and expanding the presence of fi bre technology worldwide. 

It all comes down to this… 

Emtelle offers tremendous expertise in FttX, a proven track record 

in many diverse projects worldwide, a dedication to innovation, 

excellent support, and high-level accreditation. offers 

quicker installation, quicker maintenance, greatly reduced time-torepair, 

more fl exibility and scalability, maximum network uptime, 

and is much less intrusive. And in terms of total cost of ownership, 

it can maximise revenues, lower day-one capital expenses, lower 

long-term operating expenses, while increasing your network’s 

marketability as FttX becomes the preferred option for providing 

broadband access to millions of users. From all this, it’s clear that 

is not just a solution, but the solution – the natural 

choice – for all your air blown fi bre needs. 




3 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


4 

Fibre-to-the-Curb (FttC) applications 


PoP 

PoP 

FROM EMTELLE 

Emtelle leads the industry in the access part of fi bre-based networks with small- and large-diameter FttC solutions that allow the 

installation of tube bundle networks from the Point of Presence to individual homes, businesses, street cabinets, etc. Emtelle not only lead 

the industry in providing access network solutions, they are leaders in the delivery of high fi bre count mini cables in the feeder section of 

the network. Our standard offering is pre-installed loose protected microduct which can be supplied in various duct sizes and microduct 

confi gurations. For customers with special requirements 

i.e. thermal stability or full water blocking capabilities, 

special fi xed protected 

microduct products 

can be provided. 

Greater fl exibility means 

that new customers 

Tools 

can be connected quickly, 

for immediate revenue 

generation. 

Tight 

Protected 

Microduct 

Fibre 

Products 

page 13 

Tight 

Protected 

Microduct 

page 26 

DBmf 

Heavy-Wall 

Bundles 

page 28 


Street 

Cabinet 

Access 

Chamber 

Customer 

Lead-in Point 

page 59 

Tight htPr Protected 

Microduct 

page 26 

Access 

Chamber 

32/26 HDPE Drop Duct 

page 41 


Duct 

H-Branch 

page 54 

Protected Connector 

page 72 



Closure 

page 53 

1:32 Splitter Dome 

page 63 


Installation 

Equipment 

page 79 

Inline Straight Tube 

Jointing Closure 

page 56 

Installation 

Equipment 

page 79 

Street 

Cabinet 

Loose 

Protected 

Microduct 

Point of 

Presence 

Lock & Block Kit 

Straight Joint 

Customer 


-Fixed Fibre Drop 

Customer Point 

-Upgradeable Fibre Drop 



Microduct 

page 23 

Drop Outlet 


Micro Cable FU 



Access 

Chamber 

page 46 

Rack Mount 

Splitter 

Pre-Connect Fibre 

page 17 

Customer 


page 61 

PoP 

PoP 

Street Cabinet 

Internal 

Y Branch 

page 60 

Elongated 

Closure 

4-way 

Indoor Tight 


page 33 

Connector 

Access 

Chamber 

MDU Cabinet 

Railway Station 

PoP 

PoP 

Tight ht Protected t 

Microduct 

Fibre Unit 

Minicable 

Accident 


A 

I90 c

ccident 

losed at J32 

Accident 


PoP 

 


Center 

PoP 

Refinery 

FROM EMTELLE 

Fibre-to-the-X (FttX) 

Customer Connection Point 

page 61 

Splicing Unit 

Internal Y Branch 

page 60 


Closure 

DBmf 

PoP 

 


1DB,5/3.5mm 

 

 

Windfarm 

Splice Dome 

To Gantry / Station 

 

 

Fibre 

Products 

 

 


Microduct 


Microduct 

32 - 26 mm 

Cable in Duct 


Microduct 


Microduct 

Key benefi ts of Emtelle’s FttX solution 

■ Enhanced design fl exibility 

■ Improved network scalability and reliability 

■ Reduced CapEx and OpEx for investor/operator 

■ More lucrative return-on-investment potential 

■ Range of innovative pre-installed and pre-fi tted 

components 

■ Quicker and less intrusive network modifi cation/ 

maintenance 

Fibre-to-the-Home (FttH) applications 

Even a modest mix of popular broadband services can involve transference speeds 

beyond traditional infrastructures. Optical fi bre, however, is up to the task, and when 

deployed with can be installed easily and cost-effectively. Tubes can be 

laid fi bre-ready along with other utility lines. This reduces build costs and the cost of 

redundant fi bre provision. Fibre bundles can 

simply be blown in to supply service when it 

is required. 

 

1 way drop / 1 way pre-installed 

microcable FU 


Pre-Installed 

Microcable FU 

Page 17 



5 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


6 

Fibre-to-the-X (FttX) 

Internal 

Y Branch 


Closure 

Indoor Tight 


MDU Cabinet 

Fibre Node 


FROM EMTELLE E 

Multiple Dwelling Units (MDU) 

To provide for a variety of MDU scenarios, Emtelle offers three solutions: Shared Microduct Routing, Direct Microduct Routing and Rapid 

Fit Installation. The fi rst two solutions are ideal for use in modern high-rise applications. With Shared Routing, fi bre is led up to each 

level, and then split to each customer connection point via a splicing unit. With Direct 

Routing, fi bre is routed straight to each customer connection 

point. With this combination of solutions available, investors 

in the network can be sure that precisely the right 

technology is being deployed for their particular building. 

Rapid Fit Installation is ideally suited for smaller, 

typically less modern, MDUs. Here, a Fixed Fibre Drop 

or an Upgradeable Fibre Drop is plugged onto 

the customer’s existing equipment. This 

procedure can be fi nished very 

quickly and with minimum 

disruption to the customer 

premises, ensuring that 

high-speed access can be 

made available literally 

at a snap. 






Aerial applications 

Low Rise / Garden Style 

MDU 


Pre-Connect 

Fibre 

Customer 

Connection 

Point 

Emtelle’s Aerial blown fi bre solution is based on its renowned 

technology and products. Modern advances in fi bre 

product design and installation practices have revolutionized blown 

fi bre aerial installation, producing impressive practical, 

technical and economic benefi ts without the need 

for digging. As a result, aerial installation 

is becoming recognized as a quick and 

cost-effective alternative, especially 

in cases where an existing aerial 

infrastructure (for example, phone 

lines or electrical cables) is already 

in place. Emtelle’s Aerial blown fi bre 

solution is ideal for a wide range of 

customers, including municipalities, 

housing developers, utility 

companies, network operators, cable 

TV operators, universities, hospitals. 




Cable Clamp 

AC68 

Drop tube 

Figure-8 Tube Bundle 



PoP 

PoP 

Bolt 

Suspension 

Clamp 

High Rise MDU 



Microduct 

Customer 

Lead-In Point 

J-Hook bolt-through 

Bracket 

Installation 

Equipment 

CCable 

Clamp AC10 

Customer 

Connection 

Point 

Splicing Unit 

Internal 

Y Branch 

Branch Closure 

Dome Closure 

Mid-Blow 

PoP

Windfarm 

PoP 

32 - 26 mm 

Cable in Duct 

Applications 

FROM EMTELLE 

Campus/Business Park 

applications 

The university, the business park, ark, 

the hospital, the military base – 

wherever people work together, er, 

they need to communicate. To 

maximise the potential of ever r more 

sophisticated digital technology, gy, 

high-bandwidth is essential. This his 

requires an adaptable, robust 

infrastructure – the kind you can an 

easily achieve with . 

Type B 

Terminator 

Accident 


Accident 


Accident 


Duct Plug 

12 Way DI 

5/3.5mm 

3 4 

2 1 2 

1 1 1 3 

2 2 4 


Center 

City 

POP 

2 Way DB 

5/3.5mm 

7 Way DI 

5/3.5mm 

1 

1 1 

4 1 

2 

3 

1 

1 

Dome Splice 

Enclosure 

4 Way 

Opticom 

Closure 4A 




Refinery 

Loose 

Protected 

Microduct 

Telemetry 

Emtelle’s solution, can 

be used in a number of telemetry 

applications such as: 

■ wind farms 

■ oil/gas pipelines 

■ utilities 

■ intelligent transport systems 

■ housing projects 

7 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


8 

FttX Installation Techniques 


FROM EMTELLE E 

A Choice of Installation Techniques 

The popularity of FttX means that fi bre is being installed in an increasingly wider range of applications. Different scenarios require different 

approaches, so Emtelle offers a variety of installation techniques. We have considerable experience in all these techniques, and can work 

with customers both to determine the most appropriate option and to implement it successfully. 

Direct Burial Directional Drilling 

Inside Sewer Mole Ploughing 

Aerial Trenching 

Semi Aerial Slot Cutting 



PoP

PoP 

Customers 

FROM EMTELLE 

Military 

Military communications systems should be able to tolerate 

violent conditions without faltering for one second. Emtelle 

has developed solutions that meet all military requirements 

in terms of shock resistance and medical safety, and are ideal 

for use in constrained spaces. Also, is uniquely 

capable of absorbing new technologies and applications, creating 

technological, fi nancial and tactical benefi ts that will resound 

throughout the military organisation that deploys it. 

■ Compliant with Naval Engineering Standard (NES) 

■ Easily upgraded 

■ Low fl ammability 

■ Oil-resistant 

■ Very low smoke emission 

■ Halogen-free 

Housing Developers 

With blown fi bre installed, homebuyers can enjoy a wealth of services, 

including downloadable movies, ultra-fast Internet connections, videoon-demand, 

state-of-the-art home offi ce capabilities and HDTV. Even 

more applications are in the pipeline – with , you’ll be 

able to plug them into your network at a snap. And even if residents’ 

broadband needs are modest, fi bre-based access will add substantially to 

the marketability of their property in the future. 

■ Broadband becomes as accessible as gas, water and electricity 

■ Increases the market value of homes 

■ Reduces installation, maintenance and labour costs 

■ Delays the installation of fi bre until it is required (“pay-as-you-grow”) 

■ Offer more services and generate additional income 

■ Minimises disruptive street-digging, traffi c detours, etc. 

Transportation Departments 

Modern transportation systems have full communication, CCTV and 

diagnostic systems on-board. These systems have to fi t into limited 

spaces; requires so little space that multi-routes can easily 

be installed and replaced. is also ideal in larger-scale 

transportation applications, such as traffi c monitoring and incident 

management, saving money not only because it is intrinsically costeffective, 

but also because it creates many supplementary savings (for 

example, by reducing emergency-response costs). 

■ Flexible, future-proof solution 

■ Easily replaced 

■ Enables real-time transport monitoring 

■ Faster response times 

■ Enables immediate transmission of traffi c information 

■ Creates auxiliary fi nancial benefi ts 




9 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


Customers 

Universities, Hospitals, Airports 

In campus environments, networks must be extremely fl exible, allowing fi bres 

to be run to any point with minimal splices, even when going outdoorsindoors-outdoors. 

is ideal for such requirements, while also 

minimising down time. This is crucial where network-related tasks are often 

time-critical. Network administrators can be assured of a network that is easy 

to install, open, and adaptable to future requirements, ensuring that all users 

will enjoy high-speed network access at all times. 

■ Suitable for a wide range of environments and buildings 

■ Allows quick, non-disruptive network modifi cation and maintenance 

■ Department budgets can be combined to have a shared network 

■ Tube bundle accommodates different fi bre types for different applications 

■ Temporary links can be blown out, leaving empty tubes for future needs 


FROM EMTELLE 

Municipalities 

More and more municipalities are beginning to understand that highspeed 

communication infrastructures are a major attraction to families and 

businesses, and that fi bre-based air blown technologies such as 

are the best solutions for FttH in the crucial last mile. With a 

network in place, you’ll differentiate yourself from other municipalities with 

services that improve the quality-of-life of people in your community. 

■ Makes broadband as accessible as gas, water and electricity 

■ Opens new services: e.g., e-learning, telemedicine, church services 

■ Makes your community a more desirable place in which to live and work 

■ Delays installation of fi bre until required, reducing initial investment 

■ Reduces installation, maintenance and labour costs 

■ Lets you share your infrastructure with other parties for additional income 

Utility Companies 

The ‘last mile’ of cabling can be the most problematic when it comes to communications networks. However, it is also an area where 

utilities typically have established ducts. enables them to use these ducts to install high-speed fi bre links, thereby cutting 

costs and installation times. Because of its fl exibility, gives utilities the freedom to choose their initial level of involvement; in 

the future, networks can be quickly expanded and upgraded in line with demand. 

■ Makes broadband services as accessible as gas, water and electricity 

■ Adaptable to both residential and business developments 

■ Delays the installation of fi bre until it is required (“pay-as-you-grow”) 

■ Utilises existing expertise, infrastructure and customer-support services 

■ Provides additional income if broadband is leased out to other parties 

■ Offers many innovative deployment options 



PoP

PoP 

Customers 

FROM EMTELLE 

Telecom and Next Generation Network Operators 

In terms of providing broadband-based services, network operators 

have a big advantage: as experienced service providers, you are in 

a position to leap ahead of competitors. With , you can 

extend your role as a broadband service provider, quickly connec 

ting homes and businesses with minimal disruption and low costs. 

You can also update your network according to your own needs and 

resources, and satisfy market demand with innovative appli cations. 

■ Uses already existing infrastructure for quick, lower-cost 

installation 

■ Lets you share capacity with, or rent it to, other providers 

■ Delays the installation of fi bre until it is required (“pay-as-yougrow”) 

■ Provides increasingly expanding sources of revenue 

■ Provides secure foothold in increasingly competitive market 

■ Adaptable to both residential and business customers 

Installers 

Customers are increasingly insisting that their homes and offi ces have high-speed connectivity. provides the most costeffective, 

trouble-free way to achieve FttH installation in the crucial last mile. Once the robust, lightweight fi bre is in place, the network is 

extremely reliable, and easy to maintain and upgrade. With , you ensure a future-proof infrastructure that enables the delivery 

of the latest services and allows rapid network expansion, if required. 

■ Adaptable to both residential and business developments 

■ Uses already existing ducts for quick, lower-cost installation 

■ Requires light-weight, easy-to-use equipment 

■ Flexible and future-proof, maximising return on investment 

■ Involves far less disruption 

■ Drastically reduces splices 




11 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


Customers 


FROM EMTELLE 

FttX Global Projects 

Emtelle has successfully met the challenges of a wide range of FttX projects. For further information on FttX Global Projects, 

please refer to www.emtelle.com. 

In Building 

1600 Commercial Buildings in 

Singapore 

AMP Buildings throughout 

Australia 

Canary Wharf, London 

Campus/Business Park 

Changi Airport (Terminal 2 

upgrade), Singapore 

Dublin Airport, Ireland 

Johannesburg International 

Airport, South Africa 

Manchester University, UK 

Balsburg Building Zurich Airport, 

Switzerland 

Kuala Lumpur International Airport, 

Malaysia 

Medunsa University, South Africa 

San Antonia, Texas, USA 

Dunedin University, New 

Zealand 

Perwaja Steel Industrial 

Complex, Malaysia 

Fibre-to-the-Home / MDU 

Nuenen, Netherlands 

Binningup, Australia 

Säffle, Sweden 

Hillsboro, Oregon, USA 

Syd Energi, Denmark 

Tre-for Bredbaand, Denmark 

Energi Midt, Denmark 

Gothenburg, Sweden 

Kalgoorlie, Australia 

Södertälje, Sweden 

Eindhoven, Netherlands 

Örnsköldsvik, Sweden 

Ports 

Long Beach, CA, USA 

San Diego, CA, USA 

Port Hueneme, CA, USA 

Oakland, CA, USA 

Port Rupert, Canada 

Long Distance 

Janaf, Croatia 

Mandurah Rail, Australia 

Gateway Upgrade Project, 

Brisbane, Australia 

Perth - Bunbury Highway, 

Australia 

Reid Highway, Perth, Australia 

Southampton City Council, UK 

Makati to Nasugbu Backbone 

Link, Philippines 

Sea cable landing sites, Cyprus 

ABSA Bank, Pretoria, South 

Africa 

International Finance Centre, 

Dubai, UAE 

Auckland Sky Tower, New 

Zealand 

Birmingham University, UK 

Manchester Airport, UK 

Curtin University, Australia 

University of Western Australia 

Melbourne Airport, Australia 

Brisbane Airport, Australia 

Royal Children’s Hospital, 

Melbourne, Australia 

Royal Bolton Hospital Trust, UK 

Exxon Refinery, Fawley, UK 

York University, UK 

Galway Business Park, Ireland 

Shetland Council, UK 

Industrial Estate, Thailand 

Queens University, Belfast, UK 

North Staffordshire NHS, UK 

Monterrey, Mexico 

Enschede, Netherlands 

Delft, Netherlands 

Squire Creek, USA 

Leonie Hill, Singapore 

El Rio, Arizona, USA 

Lulea, Sweden 

Chunghwa Telecom, Taiwan 

Hau Hin, Thailand 

Maldives 

High Rise Apartments, Taiwan 

West Whitlawburn, UK 

Fibre-to-the-Curb/(City) 

Olympic Games, Athens 

Lenowisco, USA 

Christchurch City Council, 

New Zealand 

Electricity Ashburton, New 

Zealand 

Military 

Type 45 Destroyer, Royal Navy 

Army and Air Force Bases, 

Australia 

ADF, Enoggera, Australia 

RAAF Edinburgh, South Australia 

RAN Frigates, Australia 

RAAF Amberly, Australia 

Dover Air Force Base, USA 

Commercial Buildings, Taiwan 

Australian Federal Police 

Fiona Stanley Hospital, Perth 

Salford Royal NHS, UK 

Leeds Metropolitan University, 

UK 

Lancashire Police HQ, UK 

VA Grand Junction Hospital, 

CO, USA 

VA Orange County Hospital, 

CA, USA 

Dallas Fort Worth Airport, TX, 

USA 

Kansas City Airport, KS, USA 

Ohio State Prison, OH 

Hilversum, Netherlands 

Amersfoort, Netherlands 

Dordrecht, Netherlands 

Soest, Netherlands 

Alpen aan de Rijn, Netherlands 

Skövde, Sweden 

Ystad, Sweden 

Rutland, UK 

Alston Community Broadband, UK 

Beaverton, OR, USA 

Homestead, VA, USA 

Grand Junction, CO, USA 

Starrett City, NY, USA 

Sunset Communications, VA, USA 

Marshall City, LA, USA 

Pax River, VA, USA 

City of Weston, FL, USA 

Miscellaneous 

Aerial Projects, Sweden 

Skellefteå Windfarm, Sweden 

London 2012 Olympics, UK 

Manchester Metro, UK 

Trump International Golf Club, 

Aberdeenshire, UK 

Volvo Ocean Race, Galway, 

Ireland 

Electranet, Adelaide, Australia 

Energy Australia, NSW 

International Finance Centre, Dubai 

Changi Airport, Singapore 

Netherlands 

Leonie Hill, Singapore 

Janaf, Croatia 

Type 45 Destroyer, Royal Navy 



PoP

FIBRE PRODUCTS 





13 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


14 

Microcable Fibre Unit (FU) 

If asked to list the most important issues to be considered when 

choosing a high performance fi bre unit, most people would include: 

performance, ease-of-handling and durability. In all these criteria, 

Emtelle’s microcable FU has been shown to exceed other currently 

available fi bre units. 

In contrast with previous generation fi bre units (typically known as 

“EPFU”), Emtelle’s fi bre unit contains a state-of the-art, specifi cally 

designed polymeric sheath that is optimised for blowing: tests (500 

metres at 50 metres per minute) have shown that this sheath, in 

combination with the fi bre unit’s single layer resin, improves blowing 

performance by 50%. 

The fi bre unit, which is compatible with industry-standard blowing 

equipment, is also extremely easy to use and handle. For example, 

compared to other methods, stripping the fi bre can be done simply, 

quickly and with greater reliability. This ensures considerable savings 

on the costs associated with manpower. 

Microduct 

size mm 

3.0/2.1 ✓ ✓ 

Microcable FU 

fi bre count 

2 4 6 8 12 

5.0/3.5 ✓ ✓ ✓ ✓ ✓ 

8.0/6.0 ✓ ✓ ✓ ✓ ✓ 

For relevant Tools, refer to page 93 

For Installation Equipment, refer to page 79 

For Fibre Restraint Methods, refer to page 102 



In terms of durability, the fi bre unit again outperforms legacy designs. 

It is highly resistant to crushing and (thanks to the elimination 

of the ‘sandpaper effect’) minimises any problems due to abrasion. 

Its particle-free design also drastically reduces maintenance 

requirements of blowing equipment. In addition, the smoothness 

of the product ensures that equipment seals will last longer, further 

enhancing the longevity of the system. 

Emtelle’s fi bre unit has proved itself again and again in many 

projects worldwide. The product has been used for varied applications 

in diverse environments. 

■ Ease of handling and durability 

■ Compatible with industry-standard blowing equipment 

■ Optimised for blowing 

■ Proven in many worldwide projects 

2 Fibre 4 Fibre 6 Fibre 8 Fibre 12 Fibre 

Diameter 1.1 mm 1.1 mm 1.3 mm 1.5 mm 1.6mm 

Weight (mass) 1.0 g/m 1.0 g/m 1.6 g/m 1.8 g/m 2.2 g/m 

Breakout typically 2 mins for 3m 

Blowing distance 1400 m typical 

Fibres 2 + 2 mechanical 

fi bres as ripcords 

4 6 + 1 mechanical 8 12 

Fibre colours Blue, orange Blue, orange, Blue, orange, Blue, orange, Blue, orange, 

green, red green, red, grey, green, red, grey, green, red, grey, 

yellow yellow, brown, yellow, brown, 

violet violet, black, 

aqua, pink, white 

Packaging fi bre rosette into pan 

Fibre types 

Other fi bre counts, e.g. 5 and 7, available on request. 

single mode ITU-T G.652d 

single mode ITU-T G.657A1 

single mode ITU-T G.655 

multi mode 62.5/125 OM1 

multi mode 50/125 OM2, OM3, OM4 

Refer to page 16 for product codes. 

Standard sheath 

colour is yellow. 

Other colours are 

available on request. 

Combo fi bre unit (MHT1204) 

Combinations of multi mode fi bres, 

optionally together with single 

mode fi bre types or fi lling elements 

specifi c to customer requirements. 

Contact your local Emtelle representative 

for further details. 


from those listed in our latest catalogues, which are limited by publication date. For the latest specifications please visit our website at www.emtelle.com or contact your Emtelle representative.


Singlemode Optical Parameters 

Fibre type ITU-T G.652d and ITU-T G.657A1 

Attenuation 1310 nm 

1550 nm 

Multimode Optical Parameters 

0.4 dB/km 

0.3 dB/km 

Waterpeak 1383± 3 nm 0.34 dB/km 

PMD 0.2ps / (km) 0.5 

1 Primary coated fi bre bend radius in accordance with ITU-T G.657A1 

Attenuation 

Fibre Class Maximum Attenuation at 20ºC (dB/km) 

850nm 1300nm 

62.5/125 Fibres: OM1 3.5 1.0 

50/125 Fibres: OM2, OM3 and OM4 2.6 0.8 

Standards 

Emtelle Class Fibre Core/Cladding 

(microns) 

ISO/IEC 11801 IEC 60793-2-10 TIA/EIA 

OM1 62.5/125 type OM1 type A1b 492AAAA-A 

OM2 50/125 type OM2 type A1a.1 492AAAB 

OM3 and OM4 50/125 type OM3 type A1a.2 492AAAC-A 

Bandwidth and Transmission Capacity 

Fibre Class Bandwidth (MHz.km) *1000Base-SX 

Legacy LED Based OFLa 

OFL 

Laser Based 

Gigabit Ethernet 

Reach (m) 

at 850nm 

a RMLb EMBc 850nm 1300nm 850nm 850nm 


**10GBase-SR 

10 Gigabit Ethernet 

Reach (m) 

at 850nm 

OM1 200 500 220 – 300 – 

OM2 500 500 – 510 600 – 

OM3 1500 500 – 2000 1000 300 

OM4 3500 500 – 4700 1100d 550 

Notes: 

a. OFL; measured by over fi lled launch as per IEC 60793-1-41, for legacy and LED-based systems. 

b. RML; measured by restricted modal launch as per IEC 60793-1-41. for intermediate performance laser based systems. 

c. EMB; Effective modal bandwidth by minEMBc in accordance with IEC 60793-1-49. 

d. Extended reach requires maximum cabled attenuation 3.0dB/km and total connector loss of 1.0dB at 850nm. 

* Gigabit Ethernet: Characterised system reach is based on IEEE 802.3z Standard Reference Model in accordance with ISO/IEC 11801. 

System reach can be calculated using EMB. 

** 10 Gigabit Ethernet: Characterised system reach is based on IEEE 802.3ae Standard Reference Model in accordance with ISO/IEC 

11801. System reach can be calculated using EMB. 



15 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


16 

Environmental Performance* 

Test Test Method Test Parameters 

Temperature Cycle IEC 60794-1-2-F1 

(3 cycles) 

Mechanical Performance* 

Microcable FU product codes 

Pan Weights and Dimensions (ext. height x diameter) 

Emtelle can also offer non-standard 

lengths. These may be subject to longer 

lead-times than our standard product 

range. Please call your local Emtelle 

representative to check for availability. Small: diameter 540mm, height 200mm, Medium: diameter 540mm, height 300mm, 

Large: diameter 540mm. height 400mm 


FIBRE PRODUCTS S 

Fibre Count single mode ITU-T multi mode 

G.652d G.657A1 G.655 62.5/125 

OM1 

50/125 

OM2 

50/125 

OM3 

50/125 

OM4 

2 9032 9506 - 9021 7653 9058 9180 

4 7590 9507 - 7578 7577 6669 9181 

6 90024 - - - - - - 

8 7589 9509 - 7580 7583 6668 9182 

12 7575 9510 9179 7582 7581 7714 9013 

Generic Specifi cation MHT1201 MHT2185 MHT1202 MHT1203 

Order Example 2 fi bre G652d = Product Code 9032 and specify standard length required 

Standard 

Length 

2 fi bre 4 fi bre 6 fi bre 8 fi bre 12 fi bre 

12,000m 16.5 kg 

Large 

– – – 

6,000m 10 kg 

Medium 

4,000m 6.5 kg 

Small 

2,000m 4.5 kg 

Small 

+20°C, -40°C, +60°C 

≤0.1dB change during and after test 

Water Soak IEC 60794-5 18°C / 22°C 


Damp Heat Cycle IEC 60068-2-38 

(10 cycles) 

Test Test Method Test Parameters 

Tensile Performance (EN 187000 A1/ 501 

IEC60 794-12-E1) 

Change @ 1550nm 

Flexing IEC 60794-1-2-E11A 


Crush I IEC 60794-1-2-E3 


Crush II IEC 60794-1-2-E3 


*Singlemode fi bre. For multimode fi bre, see datasheet MHT1203 

25°C, 65°C, 25°C, 65°C, 25°C , -10°C, 25°C 


Load is 1x w (in kg) (eg 12fu is 2.2kg) 

10 min 

0.05dB change after test 

Diam 40mm x 3 turns 

5 cycles at 20°C 

≤0.05dB change after test 

100 mm plate, 100N, 

1 min, 2 tests at different places 


100 mm plate, 500N, 

1 min, 2 tests at different places 


14.0 kg 

Large 

10.2 kg 

Medium 

5.7 kg 

Small 

15.0 kg 

Large 

11.0 kg 

Medium 

6.0 kg 

Small 

18 kg 

Large 

13.0 kg 

Medium 

7.0 kg 

Small 




Pre-connect Fibre 

2fu Singlemode G.652d (1 connector) 2fu Singlemode G.652d (2 connectors) 4fu Singlemode G.652d (4 connectors) 

Length SC/UPC SC/APC LC/UPC LC/APC Length SC/UPC SC/APC LC/UPC LC/APC Length SC/UPC SC/APC LC/UPC LC/APC 

(m) 

(m) 

(m) 

30 9430 9437 9444 9451 30 9360 9367 9374 9381 30 9388 9395 9402 9409 

50 9431 9438 9445 9452 50 9361 9368 9375 9382 50 9389 9396 9403 9410 

70 9432 9439 9446 9453 70 9362 9369 9376 9383 70 9390 9397 9404 9411 

100 9433 9440 9447 9454 100 9363 9370 9377 9384 100 9391 9398 9405 9412 

150 9434 9441 9448 9455 150 9364 9371 9378 9385 150 9392 9399 9406 9413 

200 9435 9442 9449 9456 200 9365 9372 9379 9386 200 9393 9400 9407 9414 

250 9436 9443 9450 9457 250 9366 9373 9380 9387 250 9394 9401 9408 9415 

Minimum Order quantity 500 reels* Minimum Order quantity 500 reels* 

Minimum Order quantity 500 reels* 

* Can be a combination of various lengths and/or connector types. 

Field Fit Connectors 

Optical fi bre interconnection is carried out using these basic technologies: 

1. Standard format optical connectors (FC/PC, SC, ST, E2000 all in PC 

and APC versions). Factory fi tted or Field-fi t versions available. 

2. Small format optical connectors (LC type) 

3. Multifi bre connectors (MT-RJ, MPO, MTP and MT) 

4. Mechanical splices 

5. Fusion splicing 

Pre-Connect is a blown fi bre unit supplied with factory terminated connector(s) at one end. 

For some applications eg. FTTH it may be an advantage to minimize splicing operations at customer 

premises. One method of achieving this is to use preconnectorised 

fi bre unit. Time and disruption at the 

customer premises can be reduced as a result. 

Available in 30m, 50m, 70m, 100m, 150m, 200m 

and 250m lengths of 2 and 4 fi bre unit with SC or 

LC connectors on the inner end and supplied on a 

recyclable reel. The fi bre unit can be blown using a suitable blowing head, with the reel located 

on a dispenser. Standard fi bre supplied is single mode G.652d (MHT1201). Other fi bre types are 

available, please contact your local sales offi ce for further information. 

Pre-Installed Microcable FU 

Emtelle can supply a large variety of protected microducts (refer to page 27 for details) which can be pre-installed with various types of 

Emtelle Microcable FU (with or without a low friction sheath). The products in the table below are an example of the products we can supply. 

Other products may be available, please contact your local Emtelle representative for further information. 

Product 

Code 

Description Low 

friction 

FU sheath 

Product Description 

Code 

9476 Pre-Connect 

Scissor Stand 

9424 Pre-Connect 

Bracket 

Assembly 

Emtelle can provide a number 

of fi bre connection options. The 

optimum solution depends upon 

technical considerations such as 

optical, mechanical, temperature and 

Typical example 

re-connection performance. Please 

contact your local Emtelle representative for details of the various 

options. 

Type Colour Standard Minimum 

Length order 

quantity 

60963 8/3.5mm + 2 PIFU MM OM3 x 1000m yes MM OM3 blue, orange 

8476 

8497 

8/3.5mm + 2 PIFU G652d x 1000m 

8/3.5mm + 4 PIFU G652d x 1000m 

yes 

yes 

G652d 

G652d 

blue, green 

blue, green 

1000m 

4000m 

60982 8/3.5mm + 2 PIFU G657A1 x 2000m no G657A1 blue, green 2000m 




17 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


18 

Blown Fibre Micro and Mini Cable 



Emtelle offers a range of micro and mini cable products. These products work in conjunction with Emtelle’s low-friction tube 

bundles for optimum blowing performance. For customer applications where a high fi bre count is required, Emtelle offers a range 

of mini cable products that are fully water blocked and contain an FRP central strength member (12f to 216f). Emtelle also offers 

Microcables which are small fi bre bundles (2f to 24f) that are water blocked and often, but not always, contain an additional strength 

member. Contact your local Emtelle representative for more information. 

The fi gures in the 

table below are 

representative only. 

Micro Cable Mini Cable 

2 4 12 24 12 24 48 60 72 96 144 192 216 

Typical Diameter 2.0mm 2.0mm 2.3mm 2.8mm 5.8mm 7.3mm 7.9mm 8.5mm 

Blowing Distance 1200m typical 2000m typical 1000m typical 

Available Fibre 

Types 

SM G.652d, G.657A1, G655, G656 (other types available on request) 

Minimum Order 

Quantity 

4000m 

Microduct Micro Cable Mini Cable 

size mm 

2 4 12 24 12 24 48 60 72 96 144 192 216 

5/3.5 ✓ ✓ ✓ 

7/5.5 ✓ ✓ ✓ ✓ 

10/8 ✓ ✓ ✓ ✓ ✓ 

12/10 ✓ ✓ ✓ ✓ ✓ ✓ ✓ 

16/12 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 

Refer to page 79 for Fibre Installation 

Equipment 

Refer to page 38 for pre-cabled 

products. 



Typical Specifi cation 


Application 

Optical mini cable for installation into microducts by blowing using air at 

pressures up to 15 bar using industry standard equipment. 

Technical Data 

Distribution: loose tubes containing 12 fi bres (typical) 

Stranding: SZ 

Central strength member: FRP 

Minimum bend radius: During installation 20 x outside diameter 

Test Specifi cation 

Tensile IEC 60794-1-2-E1 

Crush IEC 60794-1-2-E3 

Impact IEC 60794-1-2-E4 

Repeated Bending IEC 60794-1-2-E6 

Torsion IEC 60794-1-2-E7 

Cable Bend IEC 60794-1-2-E11 

Temperature Cycling IEC 60794-1-2-F1 

Water Penetration IEC 60794-1-2-F5B 

During operation 15 x outside diameter 

Temperatures (typical): Storage/Transport: -20°C to +70°C 

Installation: -10°C to +70°C 

Operating: -20°C to +60°C 

Storage Time on Drum: 12 months (recommended maximum) 

Standard fi bre type: Single mode to G652d (ITU-T ) 

Fibre And Tube Identifi cation 

Colours to EIA 598 or customer requirement 

Blown Fibre Mini Cable 12-216f 

Features and Benefi ts 

Sheath: Low friction for improved 

installation performance 

Stripping: Ripcord provided for quick and 

easy sheath removal 

Colour coding: Individually colour coded loose 

tubes for easy identifi cation 

Water Blocking: Dry core with water swellable 

elements. Gel-fi lled loose tube. 

No. 1 2 3 4 5 6 7 8 9 10 11 12 

Colour Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua 

Sheath Marking 

Marked every 1m with standard Emtelle printing or to customer requirement 




19 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


20 





TUBE BUNDLE 

TUBE BUNDLE 




21 

Terms & Conditions Emtelle Offi ces 

Training 

Tools Installation Equipment Accessories 

Sub-Duct 

Tube Bundle Fibre FFFibre Products Product uct ctt ts t ts 

Customers Cust Cuuu Cu Cuuu Cu CCCCCCCC uuuuu uuuu st s st t tom 

oooo om oooo om ooo m mer 

eee er ee er eeeeeeeeeeee r s 

FttX 

Air Ai AAAAAAAAAAA Air r Blow BBlow 

Bl Blll B BBlown 

ow ooooooooooo wn w wn w Fibre Fi Fii Fi FFFFF Fibre br b e

Air Air Blown Fibre FttX Customers Fibre Products Products Tube Tube Bundle Sub-Duct Accessories Installation Equipment Equipment Tools Tools Training Emtelle Offi ces ces Terms & Conditions 

22 



TUBE BUNDLE 

Emtelle is experienced enough in air blown fibre installation to understand that no two projects are the same. Factors such as network size, customer 

requirements, geography, topography, application areas and usage projections (to name but a few) require special considerations in terms of the 

technology and products used. To ensure that it provides the right solution every time, Emtelle offers an extensive line of high-quality products that can 

cover the requirements of the vast majority of projects. For easy reference, the following pages provide details of our tube bundle products. 

Type Page Microduct sizes (mm) Configuration 

Microduct / Primary tube 24 

3/2.1, 5/3.5, 7/3.5, 7/4, 

8/3.5, 10/6, 10/8, 12/8, 

12/10, 14/10 

Single duct, loose microducts 

3/2.1 2 to 24-way 

DB metal-free (DBmf) 27 

5/3.5 

10/8 

1 to 24 way 

1 to 7-way 

12/10 2 to 7-way 

5/2.1 1 way 

7/3.5, 7/4 2 to 24-way 

8/3.5 1 way 

DB metal-free heavy-wall (DBmf) 28 

10/6 2 to 7-way 

12/8 2 to 7-way 

14/10 1 to 7-way 

Direct Bury (DB) 

16/12 

5/2.5 

2 to 7 way 

7 way 

DB metal-free (DBmf) wrap 30 

7/3.5, 8/5 

12/8 

12 way 

2 to 12 way 

14/10 2 to 7 way 

DB filled metal-free (DBfmf) 37 10/8, 12/10 3 to 7-way 

DB Termite Resistant (DBT) 35 5/3.5 1 to 24-way 

DB Rodent Proof 35 5/3.5 7 way 

DB metal-free (DBmf) 37 12/10 7 way 

5/3.5 1 to 24-way 

Direct Bury (DB) 31 

10/8 1 to 12 way 

12/10 1 to 7 way 

Direct Install (DI) 

Direct Install (DI) 32 

5/3.5 

10/8, 12/10 

1 to 24-way 

1 to 7 way 

DI metal-free (DImf) 38 5/3.5 1 to 24-way 

5/3.5 1 to 24-way 

Low Fire Hazard (LFH) 33 

7/4 1, 2, 4, 12, 19, 24 way 

Low Fire Hazard (LFH) 

14/10 1 to 7 way 

Plenum Rated 36 6.3/4.7 1, 4, 7 way 

Riser Rated 36 5/3.5 1 to 24 way 

Drop 34 5/3.5, 6/2.7 1-way 

4/2.5 12 way 

4/2.7 4, 7, 12, 24 way 

Aerial 

Figure-8 34 

5/3.5 

10/8 

4, 7, 9, 10, 12, 17, 19 way 

1, 4, 7 way 

12/10 4, 7 way 

14/10 1 way 



TUBE BUNDLE - LOOSE PROTECTED MICRODUCT 

Loose Protected Microduct 

Loose protected microducts (see example illustrated below) are suitable for high fibre-count minicables. This tried and tested technology has 

been deployed over thousands of kilometres, providing excellent installation characteristics for cables from 24 to 144 fibres. 

The loose protected microduct solution comprises a range of microduct that are composed of standard, strong HDPE tubing as the outer duct, 

with a super smooth silicone coating inside. This outer duct provides complete protection of cables before, during and after installation. The 

smooth silicone coating remains in the duct to facilitate future repairs and/or replacements. 

Loose protected microducts offer many advantages, including: 

■ Ease of installation 

■ Optimum impact resistance for maximum durability and performance 

■ Freedom of choice when choosing micro-duct configuration 

■ Optimal utilisation of cable networks with minimal expansion costs 

■ Option to upgrade networks in step with the development of new fibres 

■ Colour coding that facilitates the identification of different routes 

■ Customer-specific duct lengths 

■ Excellent blowing performance 

The illustration shows the difference between the two types of cable installation. The 

new microduct technology has been applied to the orange duct, with the microducts 

loosely installed in the HDPE duct. The minicables with the required number of fibres 

can subsequently be installed individually in the microducts. Traditional technology 

has been used for the red duct and only a single fibre cable has been installed; 

installations of this kind often fail to make full use of the duct capacity. 

■ Configure the loose protected microduct according to your own wishes. 

■ Free combination of microducts 14, 12, 10, 7 and 5mm, fibre cables and copper cables. 

■ other configurations can be made upon request. 

■ rule of thumb: Filling area above 60% generally reduces fibre blowing lengths. 

■ option: loose protected microduct can be made with a combination of microducts and fibres. 

It is possible to install a number of microducts in a subduct. 

The actual number depends on the number and diameters of the microducts. Some examples are 

listed below. 

Examples 

The subducts can be supplied as: 

■ Standard HDPE (smooth exterior and interior) 

■ HDPE with smooth interior silicone coating 

■ HDPE with ribbed interior 

■ HDPE with ribbed interior silicone coating 

32mm 

Microduct w/silicone + ribs 

40mm 50mm 

3 x 10 mm 5 x 10 mm 10 x 10 mm 

4 x 10 mm 6 x 10 mm 7 x 10 mm 

2 x 12 mm 4 x 12 mm 7 x 12 mm 

3 x 14 mm 6 x 12 mm 

1 x 12 mm + 9 x 10 mm 

2 x 12 mm + 8 x 10 mm 

3 x 12 mm + 6 x 10 mm 

4 x 12 mm + 5 x 10 mm 

5 x 14 mm 

The availability of a 12mm Lock & Block kit means that Loose Protected Microduct can now 

successfully be used with Microcable FU. For further details refer to Pages16 and 102. 

Refer to page 40 for Loose Protected Microduct Handling Guidelines. 




23 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


24 

Microduct / Primary tube 

TUBE BUNDLE - LOOSE PROTECTED TUBE MICRODUCT BUNDLE 

Microduct Supply Minimum Product 

Drum Total Weight 

Length Order weight per Type Dimensions Weight kg 

Quantity metre gms 

(OD x W)cm 

kg 

3/2.1mm PE 4000m 4000m 3.4 HH 1000 x 475 54 68 

5/3.5mm PE 5000m 5000m 9.4 HH 1000 x 475 54 101 

7/3.5mm PE 4000m 4000m 28 HH 1000 x 475 54 166 

7/4mm PE 4000m 4000m 25 HH 1000 x 475 54 154 

8/3.5mm PE 3000m 3000m 38 HH 1000 x 475 54 168 

10/6mm PE 2000m 4000m 48 HH 1000 x 475 54 150 

10/8mm PE 2000m 4000m 27 HH 1000 x 475 54 108 

12/8mm PE 2000m 4000m 60 HH 1000 x 475 54 174 

12/10mm PE 2000m 4000m 33 HH 1000 x 475 54 120 

14/10mm PE 1000m 3000m 72.2 HH 1000 x 475 54 126 

5/3.5mm LFH 4000m 4000m 15.3 HH 1000 x 475 54 115 

5/3.5mm LFH 500m 4000m 15.3 350Ply 350 x 150 x 200 5 13 

12/8mm LFH 2000m 4000m 96 HH 1000 x 475 54 246 

14/10mm LFH 1000m 4000m 115 HH 1000 x 475 54 169 

Available in 12 colours: 

Red Orange Yellow Green Blue Violet Black White Aqua Grey Pink Brown 

Microduct OD 

mm 

Microduct ID 

mm 

Wall SDR Min Bend rad 

mm @ 20°C 


Max Pull Tension 

kg N 

3 2.1 0.45 6.7 60 2 20 

5 3.5 0.75 6.7 100 7 70 

7 3.5 1.75 4 100 20 200 

7 4 1.5 4.67 70 18 180 

8 3.5 2.25 3.56 80 25 250 

10 6 2 5 120 32 320 

10 8 1 10.0 200 20 200 

12 8 2 6 120 40 400 

12 10 1 12.0 240 24 240 

14 10 2 7.0 280 52 520 

14 12 1 14.0 280 28 280 



Dual Duct 

TUBE BUNDLE - LOOSE PROTECTED MICRODUCT 

Product Code Description Supply Length Product 

weight 

kg/m 

Product 

Code 

Drop19978 

2041 

Description Microduct Supply 

Length 

6 x 12/8mm 

microducts 

Product 

weight 

kg/m 

Dimensions 

(OD x W)cm 

Dimensions 

(OD x W)cm 

Drum Total 

Weight 

kg 

Drum Total 

Weight 

kg 

Weight 

kg 

1997762 40B 2 x 40/3.7 2 x 1000m 0.81 220 x 120 150 1620 

1997762 50B 2 x 50/4.5 2 x 600m 1.23 220 x 120 150 1542 

Other configurations available on request 

Duct OD 

mm 

Triple duct 

Multi-drop 

Duct ID 

mm 

Product Code Description Supply Length Product 

weight 

kg/m 

Dimensions 

(OD x W)cm 

Drum Total 

Weight 

kg 

Weight 

kg 

199776240C 3 x 40/3 3 x 600 1 220 x 120 150 1800 

199776250C 3 x 50/4 3 x 400 1.66 220 x 120 150 1992 

Other configurations available on request 

Wall SDR Mass nom. 

g/m 

Min Bend rad 

mm @ 20°C 

Weight 

kg 

12/8mm 1000 0.36 222.5 x 90 160 3650 


Max pull 

kg N 

40 32.6 3.7 10.8 403 800 430 4300 

50 41 4.5 11.1 615 1000 655 6550 

Duct OD 

mm 

Duct ID 

mm 


g/m 

Min Bend rad 

mm @ 20°C 

Max pull 

kg N 

40 34 3 13.3 333 800 350 3500 

50 42 4 12.5 553 1000 590 5900 

Microduct OD 

mm 

Microduct ID 

mm 


g/m 

Min Bend rad 

mm @ 20°C 

Fail tensile 

kg N 

12 8 2 6.0 59.1 240 94 940 



25 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


Tight Protected Microducts 

TUBE BUNDLE - TIGHT PROTECTED MICRODUCT 

Tight protected microducts: suitable for the installation of fi bre units containing between 1 and 12 fi bres as well as minicable (24-144 fi bres). 

In 3mm, 5mm, 7mm and 8mm microduct diameters the bundles can contain up to 24 individual microducts. They are usually deployed in the 

access part of the network – in FttH and Campus applications, for example. 

microducts with diameters ranging from 3 to 16mm are available and can be bundled in configurations of up to 24 tubes 

dependent on the individual microduct diameter. Bundles are available in several types – for example, direct bury, direct install and low fi re 

hazard – making them ideal for diverse applications such as FttH, In-Building and Campus. They can also be customized to meet specifi c 

environmental challenges. 

22 

21 

16 

20 

Standard STANDARD Microduct TUBE NUMBERING Numbering SYSTEM Sytem 

15 

23 

9 

17 

14 

8 

19 

7 

6 

10 

1 

7 

11 

18 19 

7 

6 1 

24 

9 

LFH DI / DB 

1 

5 

13 

6 

2 

4 

12 

3 

10 11 

1 

2 

2 

4 3 

2 

1 3 

5 4 

5 

12 

3 1 4 

8 

2 

5 

7 6 

2 

8 

11 

4 

3 

18 17 16 

9 

10 

12 

13 

15 

14 

2-WAY 

4-WAY 

7-WAY 

12-WAY 

19-WAY 

24-WAY 

5 

4 

3 

4 

The Central microduct 

can be used to blow 

mini cable. 

3 

6 

3 

5 

2 

7 

2 

6 

4 

4 

1 

1 

2 

2 2 

1 

5 1 

2 

1 

1 

4 

1 

5 

2 

1 

TUBE SEQUENCE (DI/DB) 


26 

1 



1 

1 

1 1 

1 

1 1 

3 2 

3 

5 

4 

1 7 

2 

1 1 1 

2 

1 

2 

1 3 

2 

1 

1 

1 

3 

4 

2 

6 

2 

2 

3 

5 

3 

4 

Microduct Sequence (DI/DB) 

1 red 1 

2 green 1 

1 red 1 

2 green 1 

3 natural 1 

4 blue 1 

1 natural 1 

2 red 1 

3 green 1 

4 blue 1 

5 blue 2 

6 blue 3 

7 blue 4 

1 red 1 7 yellow 2 

2 green 1 8 yellow 3 

3 natural 1 9 blue 1 

4 red 2 10 blue 2 

5 green 2 11 blue 3 

6 yellow 1 12 blue 4 

1 natural 1 10 yellow 1 







8 red 2 17 blue 3 


19 blue 5 










10 red 2 21 blue 3 


23 blue 5 

24 blue 6


Direct Bury metal free (DBmf) 

Assemblies of PE microducts (3 or 5mm), each with low friction performance. Each assembly 

(tube bundle) is surrounded by blocking material that reacts to block water movement. Over 

the bundle is one sheath of fl exible black PE, and one sheath of tough orange direct burialgrade 

PE. These strong products are designed for direct burial into suitably prepared ground. 

DB(mf) 

Single direct buried microducts in various forms (1DBmf) are extensively used to link the network to the building. Standard 1DBs have two 

sheaths, so the outer sheath may be removed and the single-sheathed version can then be led into closures, chambers etc where other 

protection is provided. 

A new style of 1DB* is also now offered - a single heavy-wall microduct which is available sheathed or unsheathed. These heavy wall products 

have the ideal FTTH combination of fl exibility and toughness, typically requiring no end-end connection or closure along the length. 

When using heavy wall microducts, ensure the correct connectors or reducers are used. 

* Refer to page 28. 

Product 

Code 

Description 

Microduct Supply 

Length Minimum 

Order 

Quantity 

Generic 

Specifcation 

Product 

weight 

per metre 

gms 


Drum Total weight 

Type Dimensions Weight kg 

(OD x W) mm kg 

8361T 2DBmf 3/2.1mm 2000m 4000m MHT2156 99 G 1200 x 718 92 290 

8362T 4DBmf 3/2.1mm 4000m 4000m MHT2156 130 1.4D 1400 x 1100 144 664 





8233T 1DBmf 5/3.5mm 500m 4000m MHT2156 62 coil 600 x 300 0 31 

8213T 1DBmf 5/3.5mm 500m 4000m MHT2156 62 600ply 600 x 300 8 39 

8216TS 1DBmf 5/3.5mm 2000m 4000m MHT2156 62 F 1000 x 646 72 196 

8217T 2DBmf 5/3.5mm 2000m 4000m MHT2156 145 G 1200 x 718 92 382 






8239T 1DBmf 10/8mm 2000m 4000m MHT1743 184 MB5 750 x 1018 98 466 

60208 2DBmf 10/8mm 2000m 4000m MHT1805 261 1.4D 1400 x 1100 144 666 






TECHNICAL DATA – DB(mf) Range (nominal unless otherwise stated) 

Type Microduct OD 

mm 

Microduct ID 

mm 

Bundle OD 

mm 

Min Bend rad 

mm 

Max Pull Generic 

Specifi cation 

kg N 

2DBmf 3.0 2.1 13.3 x10.3 150 55 550 MHT2156 

4DBmf 3.0 2.1 14.5 220 70 700 MHT2156 

7DBmf 3.0 2.1 16.3 240 85 850 MHT2156 

12DBmf 3.0 2.1 19.5 290 110 1150 MHT2156 

19DBmf 3.0 2.1 21.9 330 140 1400 MHT2156 

24DBmf 3.0 2.1 25.3 380 170 1750 MHT2156 

1DBmf 5.0 3.5 10.0 150 25 250 MHT 2156 

2DBmf 5.0 3.5 12.3 x 17.3 185 75 800 MHT2156 

4DBmf 5.0 3.5 19.4 300 110 1100 MHT2156 

7DBmf 5.0 3.5 22.3 335 140 1450 MHT2156 

12DBmf 5.0 3.5 28.1 425 210 2150 MHT2156 

19DBmf 5.0 3.5 32.1 550 270 2750 MHT2156 

24DBmf 5.0 3.5 37.7 645 350 3500 MHT2156 

1DBmf 10.0 8.0 17.7 270 100 1000 MHT1743 

2DBmf 10.0 8.0 17.3 x 27.3 260 140 1.4 MHT1805 

4DBmf 10.0 8.0 31.9 480 230 2.3 MHT1805 

5DBmf 10.0 8.0 34.4 520 260 2.6 MHT1805 

7DBmf 10.0 8.0 37.8 650 310 3.1 MHT1805 

2DBmf 12.0 10.0 19.1 x 31.1 290 240 2.4 MHT1805 

4DBmf 12.0 10.0 36.8 630 400 4.0 MHT1805 

5DBmf 12.0 10.0 39.8 680 480 4.8 MHT1805 

7DBmf 12.0 10.0 43.8 750 560 5.6 MHT1805 



27 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions



DBmf Heavy-Wall Microduct Bundles 


All these bundles have simplicity and strength. They have exceptional toughness and crush resistance 

and can be directly buried without the need for additional protective closures at branch-off 

points, or inline connections. The individual microducts are so strong that the outer sheath does not 

need to be protective in design, but simply holds the bundle together. The individual tubes can be 

joined by Protected and Directly Buried rated connectors (page 72-73). This solution is easy to 

use, quick to install and will reduce the Total Cost of Ownership long term. 

The 1, 2 and 3 way bundles are also suitable for slot cut installations. 

Example confi guration 

Product Description Microduct Supply Minimum Product 

Drum Total 

Code 

Length Order 

Quantity 

weight 

g/m 

Type Dimensions mm 

(OD x W) 

Weight 

kg 

weight 

kg approx 

8351T 1DBmf 5/2.1mm 500m 4000m 74 coil 600 x 300 0 37 

60171 1DBmf 7/3.5mm 4000m 4000m 28 HH 1000 x 475 54 166 

60172 2DBmf 7/3.5mm 4000m 4000m 97 MB5 1200 x 1018 98 486 

60173 4DBmf 7/3.5mm 4000m 4000m 170 1.7D 1700 x 1140 237 917 

60174 7DBmf 7/3.5mm 4000m 4000m 266 2.0D 2000 x 1140 345 1409 

60175 12DBmf 7/3.5mm 3000m 3000m 429 2.2D 2200 x 1165 570 1857 

60176 19DBmf 7/3.5mm 2000m 4000m 640 2.2D 2200 x 1165 570 1850 

60177 24DBmf 7/3.5mm 1000m 4000m 860 2.2D 2200 x 1165 570 1430 

60178 1DBmf 7/4mm 4000m 4000m 25 HH 1000 x 475 54 154 

60179 2DBmf 7/4mm 4000m 4000m 91 MB5 1200 x 1018 98 462 

60180 4DBmf 7/4mm 4000m 4000m 159 1.7D 1700 x 1140 237 873 

60181 7DBmf 7/4mm 4000m 4000m 247 2.0D 2000 x 1140 345 1333 

60182 12DBmf 7/4mm 3000m 3000m 395 2.2D 2200 x 1165 570 1755 

60183 19DBmf 7/4mm 2000m 4000m 587 2.2D 2200 x 1165 570 1744 

60184 24DBmf 7/4mm 1000m 4000m 793 2.2D 2200 x 1165 570 1363 

8470 1DBmf 8/3.5mm 2000m 4000m 38 HH 1000 x 475 54 130 

8477 1DBmf 8/3.5mm + sheath 3000m 3000m 67 G 1200 x 718 92 293 

60199 1DBmf 10/6mm 2000m 4000m 48 HH 1000 x 475 54 150 

60200 2DBmf 10/6mm 2000m 4000m 150 MB5 1200 x 1018 98 398 

60351 3DBmf 10/6mm 2000m 4000m 218 1.4D 1400 x 1100 144 580 

60202 4DBmf 10/6mm 2000m 4000m 266 1.4D 1400 x 1100 144 676 

60203 7DBmf 10/6mm 2000m 4000m 430 2.0D 2000 x 1140 345 1205 

60014 1DBmf 12/8mm 2000m 4000m 60 HH 1000 x 600 54 174 

60015 2DBmf 12/8mm 2000m 4000m 184 1.4D 1400 x 1100 144 512 

60016 3DBmf 12/8mm 2000m 4000m 267 1.4D 1400 x 1100 144 678 

60017 4DBmf 12/8mm 2000m 4000m 347 2.0D 2000 x 1140 345 1039 

60018 5DBmf 12/8mm 2000m 4000m 434 2.2D 2200 x 1165 570 1438 

60019 6DBmf 12/8mm 2000m 4000m 465 2.2D 2200 x 1165 570 1500 

60020 7DBmf 12/8mm 2000m 4000m 531 2.2D 2200 x 1165 570 1632 

8506 1DBmf 14/10mm 1400m 4200m 73 HH 1000 x 475 54 156 

8524 2DBmf 14/10mm 1400m 4200m 215 MB5 1200 x 1018 98 399 

8499 3DBmf 14/10mm 1400m 4200m 314 1.4D 1400 x 1100 144 584 

60022 4DBmf 14/10mm 1400m 4200m 391 2.0D 2000 x 1165 345 892 

60023 5DBmf 14/10mm 1400m 4200m 507 2.0D 2000 x 1140 345 1055 

60352 6DBmf 14/10mm 1400m 4200m 561 2.2D 2200 x 1165 570 1355 

8523 7DBmf 14/10mm 1400m 4200m 631 2.2D 2200 x 1165 570 1453 

60618 1DBmf 16/12mm 1000m 4000m 84 F 1000 x 646 72 156 

60722 2DBmf 16/12mm 1000m 4000m 249 MB5 1200 x 1018 98 347 

60723 3DBmf 16/12mm 1000m 4000m 363 1.4D 1400 x 1140 144 507 

60724 4DBmf 16/12mm 1000m 4000m 447 2.0D 2000 x 1140 345 792 

60725 5DBmf 16/12mm 1000m 4000m 580 2.0D 2000 x 1140 345 925 

60726 6DBmf 16/12mm 1000m 4000m 642 2.2D 2200 x 1165 570 1212 

60727 7DBmf 16/12mm 1000m 4000m 736 2.2D 2200 x 1165 570 1306 






DBmf Heavy-Wall Microduct Bundles 

TECHNICAL DATA – DBmf Heavy-Wall Range (nominal unless otherwise stated) 


mm 

Microduct ID 

mm 


mm 

Min Bend 

radius mm 


Max Pull tension Generic 


kg N 

1DBmf 5.0 2.1 10.0 130 40 400 MHT1281 

1DBmf 7.0 3.5 7.0 100 20 200 MHT2309 

2DBmf 7.0 3.5 9.2 x 16.4 160 65 650 MHT2309 

4DBmf 7.0 3.5 19.1 330 120 1200 MHT2309 

7DBmf 7.0 3.5 23.2 400 180 1800 MHT2309 

12DBmf 7.0 3.5 30.7 530 300 3000 MHT2309 

19DBmf 7.0 3.5 36.2 620 450 4500 MHT2309 

24DBmf 7.0 3.5 44.2 750 600 6000 MHT2309 

1DBmf 7.0 4.0 7.0 70 18 180 MHT2309 

2DBmf 7.0 4.0 9.2 x 16.4 160 60 600 MHT2309 

4DBmf 7.0 4.0 19.1 330 110 1100 MHT2309 

7DBmf 7.0 4.0 23.2 400 170 1700 MHT2309 

12DBmf 7.0 4.0 30.7 530 280 2800 MHT2309 

19DBmf 7.0 4.0 36.2 620 410 4100 MHT2309 

24DBmf 7.0 4.0 44.2 750 560 5600 MHT2309 

1DBmf 8.0 3.5 8.0 80 25 250 MHT2059 

1DBmf 8.0 3.5 + sheath 10.0 100 40 400 MHT2059 

1DBmf 10.0 6.0 10.0 120 32 320 MHT1563 

2DBmf 10.0 6.0 12 x 22 200 80 800 MHT1563 

3DBmf 10.0 6.0 12 x 32 200 100 1000 MHT1563 

4DBmf 10.0 6.0 26.1 380 120 1200 MHT1563 

7DBmf 10.0 6.0 32.0 540 240 2400 MHT1563 

1DBmf 12.0 8.0 12.0 120 40 400 MHT1564 

2DBmf 12.0 8.0 14 x 26 220 90 900 MHT1564 

3DBmf 12.0 8.0 14 x 38 220 140 1400 MHT1564 

4DBmf 12.0 8.0 31.0 440 180 1800 MHT1564 

5DBmf 12.0 8.0 34.4 600 240 2400 MHT1564 

6DBmf 12.0 8.0 38.0 600 260 2600 MHT1564 

7DBmf 12.0 8.0 38.0 650 280 2800 MHT1564 

1DBmf 14.0 10.0 14.0 210 50 500 MHT2308 

2DBmf 14.0 10.0 30 x 16mm 240 120 1200 MHT2308 

3DBmf 14.0 10.0 44 x 16mm 240 170 1700 MHT2308 

4DBmf 14.0 10.0 36mm across corners 500 200 2000 MHT2308 




1DBmf 16.0 12.0 16.0 160 85 850 MHT2432 

2DBmf 16.0 12.0 34 x 18 180 160 1600 MHT2432 

3DBmf 16.0 12.0 50 x 18 180 240 2400 MHT2432 


5DBmf 16.0 12.0 45.5mm across corners 770 380 3800 MHT2432 





29 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions

Air Air Air Blown Fibre FttX Customers Fibre Fibre Products Products Products Tube Tube Tube Bundle Bundle Sub-Duct Accessories Accessories Installation Installation Equipment Equipment Equipment Tools Tools Training Training Emtelle Emtelle Offi Offi ces ces ces Terms Terms & & Conditions 

Conditions 

30 


Direct Bury Metal Free, Wrapped (DBmf)-Wrap 

TUBE BUNDLE - TIGHT PROTECTED TUBE MICRODUCT BUNDLE 

These new style of products are suitable for direct buried application without the need for additional 

protective closures at branch-off points, or inline connection points. The strong individual tubes are 

held together with spiral cross wrapped yarn for easy access to an individual tube. 

The individual tubes can be joined by Protected and Directly Buried rated connectors (page 

72-73). This solution is easy to use, quick to install and will reduce the total cost of ownership 

long term. 

Product Code Description Microduct Supply Length Minimum Order Quantity Generic Specifi cation 

60738 7DBmf-Wrap 5/2.5mm 4000m 4000m CP740 

60760 12DBmf-Wrap 7/3.5mm 3000m 3000m MHT2427 

60791 12DBmf-Wrap 8/5mm 2000m 4000m CP1039 

60763 2DBmf-Wrap 12/8mm 2000m 4000m MHT2430 






30

TUBE TUBE BUNDLE BUNDLE - TIGHT PROTECTED MICRODUCT 

Direct Bury (DB) 

The assembly is surrounded with a 125µm aluminium layer, bonded inside a sheath of fl exible 

black PE with a heavy duty orange coloured HDPE sheath making the product suitable for direct 

burial. Rip cords are pre-installed along the entire length, under the sheath, to rip through the 

aluminium and sheath using correct procedure. 

Product Descrip- Microduct Supply Length Minimum Product 

Drum Total 

Code tion 

Order 

Quantity 

weight per metre 

gms 

Type Dimensions 

(OD x W) mm 

Weight 

kg 

weight 

kg 

6627 1DB 5/3.5mm 4000m 4000m 72 MB5 750 x 1018 98 386 

6406 2DB 5/3.5mm 4000m 4000m 159 1.4D 1400 x 1100 144 780 

6375 4DB 5/3.5mm 4000m 4000m 216 1.7D 1700 x 1140 237 1101 

6314 7DB 5/3.5mm 4000m 4000m 278 2.0D 2000 x 1140 345 1457 

6556 12DB 5/3.5mm 4000m 4000m 411 2.35D 2350 x 1165 551 2195 

6352 19DB 5/3.5mm 3000m 3000m 526 2.35D 2350 x 1165 551 2129 

6557 24DB 5/3.5mm 2000m 4000m 671 2.2D 2200 x 1165 570 1912 

6893 1DB 10/8mm 2000m 4000m 185 MB5 750 x 1018 98 468 

6798 2DB 10/8mm 2000m 4000m 285 1.7D 1700 x 1140 237 807 

6655 4DB 10/8mm (round) 2000m 4000m 450 2.0D 2000 x 1140 345 1245 

6593 7DB 10/8mm 2000m 4000m 606 2.2D 2200 x 1165 570 1782 

60152 12DB 10/8mm 1000m 4000m 946 2.2D 2200 x 1165 570 1516 

60360 1DB 12/10mm 2000m 4000m 205 MB5 750 x 1018 98 508 

60361 2DB 12/10mm 2000m 4000m 331 1.7D 1700 x 1140 237 899 

60736 4DB 12/10mm (round) 2000m 4000m 542 2.2D 2200 x 1165 570 1654 

60365 7DB 12/10mm 1000m 4000m 726 2.0D 2000 x 1140 345 1071 

TECHNICAL DATA – DB Range (nominal unless otherwise stated) 


mm 

Microduct ID 

mm 


mm 

Min Bend rad 

mm* 




kg N 

1DB 5.0 3.5 10.0 150/100 50 500 MHT113 

2DB 5.0 3.5 12.2 x 17.2 190/120 120 1200 MHT113 

4DB 5.0 3.5 19.3 300/200 160 1600 MHT113 

7DB 5.0 3.5 22.2 350/240 200 2000 MHT113 

12DB 5.0 3.5 28.2 430/310 280 2800 MHT113 

19DB 5.0 3.5 32.2 550/360 400 4000 MHT113 

24DB 5.0 3.5 37.8 650/500 500 5000 MHT113 

1DB 10.0 8.0 17.2 260/180 130 1300 MHT167 

2DB 10.0 8.0 17.2 x 27.2 260/180 200 2000 MHT167 

4DB 10.0 8.0 31.9 540/370 300 3000 MHT167 

7DB 10.0 8.0 37.8 640/430 400 4000 MHT167 

12DB 10.0 8.0 49.5 940/660 600 6000 MHT167 

1DB 12.0 10.0 19.1 280/200 150 1500 MHT167 

2DB 12.0 10.0 19.1 x 31.1 280/200 240 2400 MHT167 

4DB 12.0 10.0 36.8 630/500 400 4000 MHT167 

7DB 12.0 10.0 43.8 750/600 550 5500 MHT167 

*The second bend radius applies after the outer sheath has been removed. 



31 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


32 

Direct Install (DI) 

The assembly is surrounded with a 125µm aluminium layer, bonded inside a sheath of fl exible 

black PE for direct-in-duct installation. A rip cord is pre-installed along the entire length, under 

the sheath, to rip through the aluminium and sheath using correct procedure. 


TUBE BUNDLE 

Product Descrip- Microduct Supply Minimum Product 


Codea tion 

Length Order 

Quantity 

weight 

per metre gms 


(OD x W) mm 

Weight 

kg 

kg 

6285 1DI 5/3.5mm 4000m 4000m 49 G 1200 x 718 92 288 

6286 2DI 5/3.5mm 4000m 4000m 77 MB5 750 x 1018 98 406 

6287 4DI 5/3.5mm 4000m 4000m 118 1.4D 1400 x 1100 144 616 

6438 7DI 5/3.5mm 4000m 4000m 162 1.7D 1700 x 1140 237 885 

6870 12DI 5/3.5mm 4000m 4000m 240 2.0D 2000 x 1140 345 1305 

6289 19DI 5/3.5mm 3000m 3000m 329 2.2D 2200 x 1165 570 1557 

6701 24DI 5/3.5mm 2000m 4000m 437 2.0D 2000 x 1140 345 1219 

8357 1DI 10/8mm 2000m 4000m 98 G 1200 x 718 92 288 

6797 2DI 10/8mm 2000m 4000m 162 MB5 750 x 1018 98 422 

6709L 4DI 10/8mm 2000m 4000m 262 1.7D 1700 x 1140 237 761 

6886 7DI 10/8mm 2000m 4000m 368 2.0D 2000 x 1140 345 1081 

60744 1DI 12/10mm 2000m 4000m 108 MB5 750 x 1018 98 314 

60745 2DI 12/10mm 2000m 4000m 178 1.4D 1400 x 1100 144 500 

60746 4DI 12/10mm 2000m 4000m 302 2.0D 2000 x 1140 345 949 

60478 7DI 12/10mm 2000m 4000m 413 2.35D 2350 x 1165 551 1377 

TECHNICAL DATA – DI RANGE (nominal unless otherwise stated) 


mm 

Microduct ID 

mm 


mm 

Min Bend rad 

mm 



kg N 

1DI 5.0 3.5 8.4 120 40 400 MHT175 

2DI 5.0 3.5 8.4 x 13.4 120 60 600 MHT175 

4DI 5.0 3.5 15.5 200 70 700 MHT175 

7DI 5.0 3.5 18.4 240 150 1500 MHT175 

12DI 5.0 3.5 23.8 310 160 1600 MHT175 

19DI 5.0 3.5 27.8 360 250 2500 MHT175 

24DI 5.0 3.5 33.4 500 400 4000 MHT175 

1DI 10.0 8.0 13.4 180 70 700 MHT888 

2DI 10.0 8.0 13.4x23.4 180 100 1000 MHT888 

4DI 10.0 8.0 27.5 370 170 1700 MHT888 

7DI 10.0 8.0 33.4 500 250 2500 MHT888 

1DI 12.0 10.0 15.3 200 75 750 MHT888 

2DI 12.0 10.0 15.3x27.3 200 140 1400 MHT888 

4DI 12.0 10.0 32.4 500 230 2300 MHT888 

7DI 12.0 10.0 39.4 600 320 3200 MHT888 



TUBE BUNDLE 

Low Fire Hazard (LFH) 

Product 

Code 

Description 


Length 

Minimum 

Assembly of 5/3.5mm LFH microducts, each with low friction performance and suitable for fi bre 

blowing. Each assembly is surrounded with a sheath of LFH material suitable for indoor fi re regulation 

use and giving excellent performance in fi re scenario, meeting IEC 60332-3 and 60332-1. 

Other LFH sizes may be available, please contact your local Emtelle representative for further information. 

■ Low fl ammability ■ Halogen free ■ Low smoke 

Order 

Quantity 

Product 

weight 

per metre gms 

Type 

Drum 

Dimensions 

(OD x W) mm 

Weight 

kg 

Total weight 

kg 

6595 

6634 

6318 

6772 

6403 

6502 

6403S 

6404 

6643 

6511 

6405 

6610 

Primary 

Primary 

Primary 

1LFH 

2LFH 

2LFH 

2LFH 

4LFH 

4LFH 

4LFH 

7LFH 

7LFH 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

4000m 

1000m 

500m 

1000m 

4000m 

1000m 

500m 

4000m 

1000m 

500m 

4000m 

1000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

15.5 

15.5 

15.5 

48 

80 

80 

80 

126 

126 

126 

190 

190 

HH 

450 ply 

350 ply 

700 ply 

G 

700 ply 

600 ply 

1.4D 

F 

E 

1.7D 

G 

1000 x 475 

450 x 250 

350 x 250 

700 x 350 

1200 x 718 

700 x 350 

600 x 300 

1400 x 1100 

1000 x 646 

800 x 516 

1700 x 1140 

1200 x 718 

54 

5 

5 

10 

92 

10 

8 

144 

72 

38 

237 

92 

116 

21 

13 

58 

412 

90 

48 

648 

198 

101 

997 

282 

6515 

6533A 

6533 

6533S 

6611A 

6611 

6611S 

6612L 

6612 

6513 

61486 

7LFH 

12LFH 

12LFH 

12LFH 

19LFH 

19LFH 

19LFH 

24LFH 

24LFH 

24LFH 

Primary 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

5/3.5mm 

7/4mm 

500m 

4000m 

1000m 

500m 

4000m 

1000m 

500m 

2000m 

1000m 

500m 

1000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

2000m 

4000m 

4000m 

4000m 

190 

310 

310 

310 

438 

438 

438 

591 

591 

591 

39 

E 

2.0D 

MB5 

F 

2.2D 

1.4D 

G 

2.0D 

1.7D 

MB5 

PIFU 

800 x 516 

2000 x 1140 

750 x 1018 

1000 x 646 

2200 x 1165 

1400 x 1100 

1200 x 718 

2000 x 1140 

1700 x 1140 

750 x 1018 

1000 x 380 

38 

345 

98 

72 

570 

144 

92 

345 

237 

98 

42 

133 

1585 

408 

227 

2322 

582 

311 

1527 

828 

394 

82 

61487 

61488 

61371 

61372 

61489 

61373 

61490 

60008 

61156 

61157 

61158 

61159 

61160 

61161 

Primary 

1LFH 

2LFH 

4LFH 

12LFH 

19LFH 

24LFH 

1LFH 

1LFH 

2LFH 

3LFH 

4LFH 

6LFH 

7LFH 

7/4mm 

7/4mm 

7/4mm 

7/4mm 

7/4mm 

7/4mm 

7/4mm 

14/10mm 

14/10mm 

14/10mm 

14/10mm 

14/10mm 

14/10mm 

14/10mm 

2000m 

2000m 

2000m 

2000m 

2000m 

1000m 

1000m 

500m 

1000m 

1000m 

1000m 

1000m 

1000m 

1000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

4000m 

39 

84 

148 

266 

665 

960 

1371 

115 

115 

377 

518 

658 

964 

1079 

HH 

F 

G 

MB5 

2.0D 

1.7D 

2.0D 

HH 

HH 

MB5 

1.4D 

1.7D 

2.0D 

2.0D 

1000 x 475 

1000 x 646 

1200 x 718 

750 x 1018 

2000 x 1140 

1700 x 1140 

2000 x 1140 

1000 x 475 

1000 x 475 

750 x 1018 

1400 x 1100 

1700 x 1140 

2000 x 1140 

2000 x 1140 

54 

72 

92 

98 

345 

237 

345 

54 

54 

98 

144 

237 

345 

345 

132 

240 

388 

630 

1675 

1197 

1716 

112 

169 

475 

662 

895 

1309 

1424 

TECHNICAL DATA – LFH Range (nominal unless otherwise stated) 

Type Microduct OD Microduct ID Bundle OD Min Bend rad 


mm 

mm 

mm 

mm 

kg N Specifi cation 

primary 

1LFH 

2LFH 

4LFH 

7LFH 

12LFH 

19LFH 

24LFH 

Primary 

1LFH 

2LFH 

4LFH 

12LFH 

19LFH 

24LFH 

1LFH 

2LFH 

3LFH 

4LFH 

6LFH 

7LFH 

5.0 

5.0 

5.0 

5.0 

5.0 

5.0 

5.0 

5.0 

7 

7 

7 

7 

7 

7 

7 

14 

14 

14 

14 

14 

14 

3.5 

3.5 

3.5 

3.5 

3.5 

3.5 

3.5 

3.5 

4 

4 

4 

4 

4 

4 

4 

10 

10 

10 

10 

10 

10 

- 

7.2 

7.2/12.2 

12.2/14.3 

17.2 

22.9 

26.9 

32.5 

7 

9.2 

9.2 x 16.2 

19.5 

30.9 

36.5 

44.9 

14.0 

30.5 x 16.5 

32.7 

34.2 

41.4 

44.7 

50 

100 

150 

150 

220 

300 

350 

500 

70 

120 

120 

300 

475 

550 

700 

160 

250 

480 

500 

650 

650 

6 

15 

25 

40 

60 

95 

130 

180 

11 

24 

35 

70 

140 

240 

300 

35 

100 

150 

175 

250 

300 

60 

150 

250 

400 

600 

950 

1300 

1800 

110 

240 

350 

700 

1400 

2400 

3000 

350 

1000 

1500 

1750 

2500 

3000 

MHT423 

MHT423 

MHT423 

MHT423 

MHT423 

MHT423 

MHT423 

MHT423 

CP820 

CP821 

CP1229 

CP1230 

CP1411 

CP1231 

CP1412 

CP772 

CP1112 

CP897 

CP1079 

CP1199 

CP 898 

Emtelle have developed a range of microducts which have an LFH sheath applied over conventional 

PE microducts (PE-LF) and which offer enhanced fi re performance compared with all-PE 

products. For indoor installations where only moderate LFH performance is required, and where 

local fi re regulations refl ect this, then the PE-LF microduct range (MHT 1757) may 

be the solution. These bundles are designed to pass the IEC 60332-1 vertical fl ame spread test, 

similar to VW-1. Please contact your local Emtelle representative for further information. 




33 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


Aerial 

Product 

Code 

Description 

Aerial Metal Free / GRP 


Figure-8 construction with steel strength member. All compatible fi ttings are available. 

Emtelle recommends that the customer checks and ensures that the products are 

suitable to be installed on existing route. In particular, it is essential that the customer 

verifi es that existing or proposed cable supports (towers or poles) are suffi ciently robust 

and suitable to carry the required clamps and cable. 


Length Minimum Product 

Order weight 

Quantity per metre gms 


(OD x W) mm 

Drum Total 


34 



Weight 

kg 

weight 

kg 

Generic 

Specification 

8194 Drop 5/3.5mm 1000 4000m 42 700 ply 700 x 350 10 52 MHT1470C 

60889 Drop 5/3.5mm 5000 5000m 36 G 1200 x 718 92 272 CP575 

60789 Drop 6/2.7mm 4000 4000m 26 E 800 x 516 38 142 CP963 

61514 1F8 6/2.7mm + copper 2000 4000m 36 E 800 x 516 38 110 CP1138 

61515 1F8 6/2.7mm + copper + PIFU 2000 4000m 37 E 800 x 516 38 112 CP1217 

61165 1F8 10/8mm 2000 4000m 282 1.7D 1700 x 1140 237 801 CP1203 

60662 1F8 14/10mm 1000 4000m 316 MB5 750 x 1018 98 414 CP1019 

60563 12F8 4/2.5mm + 1x12/8 2000 4000m 485 2.0D 2000 x 1140 345 1315 CP968 

61166 4F8 4/2.7mm 4000 4000m 257 1.7D 1700 x 1140 237 1265 CP1077 

60752 7F8 4/2.7mm 4000 4000m 317 2.0D 2000 x 1140 345 1613 CP999 

60753 12F8 4/2.7mm 3000 3000m 383 2.0D 2000 x 1140 345 1494 CP1001 

60894 12F8 4/2.7mm + 1x12/10 2000 4000m 458 2.0D 2000 x 1140 345 1261 CP980 

60754 24F8 4/2.7mm + 1x8/6 2000 4000m 542 2.2D 2200 x 1165 570 1654 CP981 

60890 4F8 5/3.5mm 4000 4000m 313 2.0D 2000 x 1140 345 1597 CP870 

8195 7F8 5/3.5mm 4000 4000m 367 2.2D 2200 x 1165 570 2038 MHT1411 

60891 9F8 5/3.5mm + 1x10/8mm 2000 4000m 449 2.0D 2000 x 1140 345 1243 CP1032 

61167 10F8 5/3.5mm + 1x12/10mm 2000 4000m 456 2.0D 2000 x 1140 345 1257 CP1136 

60755 12F8 5/3.5mm 2000 4000m 453 2.0D 2000 x 1140 345 1251 CP1030 

60892 12F8 5/3.5mm + 1x10/8mm 2000 4000m 450 2.0D 2000 x 1140 345 1245 CP1070 

60757 17F8 5/3.5mm + 1x10/8mm 1000 4000m 576 1.7D 1700 x 1140 237 813 CP1033 

60756 19F8 5/3.5mm 2000 4000m 549 2.2D 2200 x 1165 570 1668 CP1031 

60893 4F8 10/8mm 1000 4000m 486 1.7D 1700 x 1140 237 723 CP915 

61669 4F8 10/8mm 2000 4000m 486 2.2D 2200 x 1165 570 1542 CP915 

60758 7F8 10/8mm 1000 4000m 606 2.0D 2000 x 1140 345 951 CP952 

61170 4F8 12/10mm 1000 4000m 401 1.7D 1700 x 1140 237 638 CP1175 

60759 7F8 12/10mm 1000 4000m 676 2.0D 2000 x 1140 345 1021 CP1069 

Product 

Code 

Description 


Length Minimum Product 

Order weight 



(OD x W) mm 

Drum Total 

Weight 

kg 

weight 

kg 

Generic 

Specification 

61171 1F8MF 8/5mm 1000m 4000m 199 G 1200 x 718 92 291 CP1099 

61172 1F8MF 14/10mm 1000m 4000m 202 1.4D 1400 x 1100 144 346 CP1204 

61173 4F8MF 5/3.5mm 2000m 4000m 237 1.4D 1400 x 1100 144 618 CP902 

61174 7F8MF 5/3.5mm 2000m 4000m 303 1.7D 1700 x 1140 237 843 CP1124 

61175 9F8MF 5/3.5mm + 1x10/8mm 2000m 4000m 372 2.0D 2000 x 1140 345 1089 CP910 

61176 12F8MF 5/3.5mm + 1x10/8mm 1000m 4000m 367 1.7D 1700 x 1140 237 604 CP1125 

61177 4F8MF 10/8mm 1000m 4000m 423 1.7D 1700 x 1140 237 660 CP1129 

61178 2F8MF 12/10mm + 8x5/3.5mm 2000m 4000m 451 2.2D 2200 x 1165 570 1472 CP967

Direct Bury Rodent Proof 


Special Products 

Emtelle can produce many different solutions depending on the customer’s specifi cations. Some examples of special tube bundle include:- 

Mining Applications 

Product 

Code 

Assembly of 7 PE microducts surrounded with a polymer fi lling layer, a protective layer of corrugated steel (very effective against rodents) 

and a heavy duty PE outer sheath. 

Product Code Description Microduct Bundle OD 

mm 

Assembly of 7LFH microducts surrounded by a sheath of LFH, a protective layer of corrugated 

steel (very effective against rodents) then a secondary LFH sheath. 

Product weight 

g/m 



8240 7DBSA 5/3.5mm 22.8mm 392 MHT1781 

LFH Rodent Proof 

Description Microduct Bundle OD mm Product weight 

g/m 

Product Descrip- Microduct Supply Length Minimum 


Code tion 

Order Quantity Type Dimensions Weight kg 

(OD x W) mm 

kg 

6629 1DBT 5/3.5mm 4000m 4000m 1.4D 1400 x 1100 144 688 

6571 2DBT 5/3.5mm 4000m 4000m 1.4D 1400 x 1100 144 800 

6664 4DBT 5/3.5mm 4000m 4000m 2.0D 2000 x 1140 345 1385 

6570 7DBT 5/3.5mm 4000m 4000m 2.0D 2000 x 1140 345 1657 

8231 12DBT 5/3.5mm 3000m 3000m 2.2D 2200 x 1165 570 1995 

6954 19DBT 5/3.5mm 2000m 4000m 2.2D 2200 x 1165 570 2367 

8232 24DBT 5/3.5mm 2000m 4000m 2.2D 2200 x 1165 570 2030 

Product Code Description Microduct Bundle OD 

mm 

Product 

weight 

g/m 

Specification 

8240 7DBSA 5/3.5mm 22.8mm 392 MHT1781 

61201 7DBSA-LF 5/3.5mm 26mm 607 CP678 

61202 4F8 hybrid with 

copper cable 

5/3.5mm 15.5mm(w) x 28.5mm(h) 358 CP1159 

Direct Bury Termite Resistant (DBT) 

Microducts are oversheathed with a layer of nylon12, which gives mechanical and chemical 

protection against attack by termites and ants (and their formic acid). 


8483 7LFSA 5/3.5mm 23mm 470 MHT1738 

Other products may be available, please contact your local Emtelle representative for further information. 



35 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions



UL Listing 

(USA) 

Product Code 

CSA Listing 

(Canada) 

Product Code 


In North America specifi c statutory requirements exist for the provision of optical fi bre cabling, including microduct systems, within public 

buildings. 

In the USA the National Electric Code (NEC) mandates the use of Optical Fiber Riser products in risers, in the case of microducts these are 

non metallic products. Emtelle riser products are therefore rated OFNR (Optical Fiber Non-metallic Riser) for use in the USA. Similarly for 

use in plenum space areas in the USA OFNP (Optical Fibre Non-metallic Plenum) products must be used. The tests used to prove these 

performance levels are UL 1666 (Riser) and NFPA 262 (Plenum). (UL File No. E254671) 

In Canada a similar distinction between riser and plenum applications is recognised. However the certifi cation of products accepted for use 

in Canada goes via the Canadian Standards Association (CSA). In the case of Canadian riser products the performance level is FT4 and in 

the case of Canadian plenum products the rating is FT6. (CSA Certifi cate No. 2320407) 

Plenum Rated 

Plenum rated tube bundles when used with Emtelle 2,4 and 12 fi bre unit, OFNP (tested in 

accordance with NFPA262) have no outer sheath and are held together by wrapped aramid 

yarn occupying almost no radial space. The microducts have an outstanding resistance to 

ignition and heat and are made to accommodate lightweight fi bre units. 


Length 

Minimum 

Order 

Quantity 


mm 

Product 

weight 

g/m 

Generic 


6968 60795 Plenum 1 Way 6.3/4.7mm 1000m 4000m 6.3mm 25 MHT1748 



Riser Rated 

UL Listing (USA) 

Product Code 

CSA Listing 

(Canada) 

Product Code 

Riser rated tube bundles when used with Emtelle 2,4,12 fi bre unit, OFNR (tested in accordance 

with UL 1666). A special combination of tube material and sheath material is used to achieve 

this rating. 


Length 

Minimum 

Order 

Quantity 

Product 

weight 

g/m 

Generic 


60384 1LFH Riser 5/3.5mm 4000m 4000m 45 MHT2158 

60747 60798 2LFH Riser 5/3.5mm 4000m 4000m 80 MHT2158 







36 





Direct Bury fi lled metal free (DBfmf) 

Emtelle was the fi rst to introduce a Metal Free range of Tube Bundles using a fi lling polymer between 

the outer sheath and the microducts providing even compression resistance and improved 

roundness and concentricity of the individual microducts. 

Main benefi ts of the DB(fmf) products; 

Roundness of the Tube Bundle is secured 

Protection against; Kinking and Crush, 

Better handling characteristics in the fi eld once HDPE sheath is removed 

Product Descrip- Microduct Supply Minimum Product weight 

Drum Total weight Generic 

Code tion 

Length Order 

Quantity 

per metre gms Type Dimensions 

(OD x W) mm 

Weight 

kg 

kg Specifi cation 

8224 3DBfmf 10/8mm 2000m 4000m 483 1.7D 1700 x 1140 237 1203 MHT1844 









Product 

Code 


Length 

Minimum 

Order 

Quantity 

Product 

weight 

per metre gms 


(OD x W) mm 

Drum Total 




Weight 

kg 

weight 

kg 

Generic 


60771 7DBmf (HEX) 12/10mm 2000m 4000m 421 2.35D 2350 x 1165 551 1393 MHT2437 

60772 7DBmf (Round) 12/10mm 2000m 4000m 609 2.35D 2350 x 1165 551 1769 MHT2438 

Other lengths are available on request. 

37 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions



Direct Install metal free (DImf) 

Pre-Installed Fibre Products 

For further information on pre-cabled 

duct please contact your local Emtelle 

representative. 

Examples of Cable/Duct Combinations 

Minicable 

Traditional 

fi bre cable 


It is essential that users of this product securely anchor the sheath and contents of the tube bundle to a fi xed point (eg manhole 

side or duct mouth ) wherever the product emerges from a duct section. These duct sections should not be longer than 500m. 

Refer to specifi cation MHT1772. 

Both traditional fi bre optic and fi bre mini-cables are available as a pre-installed product. Lengths 

of up to 4-10km are available dependent on the cable type and materials. 

Emtelle can produce various combinations of a single fi bre cable in HDPE duct. This cable can be 

removed at a later date and upgraded as required. This confi guration particularly favours fairly 

long-distance fi bre-to-the-home (or building or MDU) deployment where neither the duct 

nor fi bre cable are previously in place, and future installations or extensions may be called for. 

These product combinations are designed for direct burial in suitably prepared ground. 

Common typical features 

■ Loose tube metal free constructions 

■ Water blocked using gel fi lled tubes and dry 

water swellable elements 

■ Central strength element 

■ Storage and operating temperature: -30°C 

to +65°C 

FIBRE CABLE DUCT OD & ID 

count Typical diam 14/10 16/12 20/16 31/25 32/27 40/33 

12f 4.2 ✔ 

24f 4.2 ✔ 

36f 5.8 ✔ 

48f 5.8 ✔ 

60f 5.8 ✔ 

72f 5.8 ✔ 

96f 7.3 ✔ ✔ ✔ 

144f 7.9 x ✔ ✔ 

192f 15.3 x x x ✔ 

288f 18.5 x x x x ✔ 

576f 22.8 x x x x x ✔ 

The tick boxes indicate the most economical pairings of fi bre cable and duct. 

For pre-installed fi bre unit refer to page 17. 

A simple sheathed bundle incorporating no metal, suitable for pulling into duct using moderate force. 

When using Emtelle Direct Install Metal Free Products adequate provision must be made to take 

account of all strain which may be caused by installation forces, practices and procedures, thermal 

changes, heat reversion or any other reasonably foreseeable force applied to the product. 

Product 

Code 

Description 


Length 

Minimum Product 

Order weight 


Type 

Drum 

Dimensions 

(OD x W) mm 

Weight 

kg 

Total weight 

kg 

Generic 


8321T 1DImf 5/3.5mm 4000m 4000m 47 G 1200 x 718 92 280 MHT1772 

8374T 2DImf 5/3.5mm 4000m 4000m 71 MB5 750 x 1018 98 382 MHT1772 

8353T 4DImf 5/3.5mm 4000m 4000m 109 1.4D 1400 x 1100 144 580 MHT1772 

8008LT 7DImf 5/3.5mm 4000m 4000m 151 1.7D 1700 x 1140 237 841 MHT1772 



60782 24DImf 5/3.5mm 2000m 4000m 410 2.0D 2000 x 1140 345 1165 MHT1772 

Specifi cations (all types) 

■ Available fi bre types: Singlemode ITU-T 

G.652d, ITU-T G.655, ITU-T G.657A1, Multimode 

A1 (IEC 60793-2-10) 

■ Fibre and tube colours: normally EIA 598 or 

EN187105 

■ Cable tested to IEC 60794 

38 I I N N N N O O V V A A T T I I O O N N A A N N D D F F L L E E X X I I B B I I L L I I T T Y 

Y 

38 



TUBE BUNDLE 

Ancillary Products 

Marker tapes to alert following utility services of the general location of fi bre ductwork and HDPE trench tiles to offer token protection 

from damage from trenching tools. 

Warning net: red, blue or violet 

Product code Description 

199807 110 M10 with search wire 10 cm, 500 m 

199807 010 M10 without search wire 10 cm, 500 m 




Warning tape: red or orange 

Item no. Item name 

199817 025 25 x 0.3 mm, 250 m per roll 

199817 050 50 x 0.1 mm, 500 m per roll 

Green Marker Tapes 

Green being the NJUG (UK National Joint Utilities Group) colour code for CATV and Telecomm 

ductworks, these come with standard print of “Caution - Fibre Optic Cables Below” or “Caution 

Telecoms Cable Below”. These can be supplied with bespoke Colour/Printline such as company 

name and Emergency Free phone Number. 

Product 

code 

Description / product type Pack Qty 

4857 Marker tape:caution tel cables (365m per roll) 1 

4785 Marker tape:fi bre optic cable (365m per roll) 1 

4785W Marker tape:fi bre optic cable (365m per roll) (contains tracer wire) 1 

Plastic tape tile: red or orange 

Product code Dimensions (W x Material thickness) Roll length 

199818 115 100 x 1.5 mm 50 m 

199818 118 100 x 1.8 mm 50 m 

199818 150 150 x 1.5 mm 50 m 

199818 170 170 x 2.2 mm 50 m 

199818 200 180 x 2.0 mm 50 m 

199818 235 200 x 3.5 mm 50 m 

199818 336 300 x 3.5 mm 50 m 

199818 430 400 x 3.0 mm 50 m 

Trench Marker Tiles 

■ Cable tiles are a heavy protection product manufactured from high impact recycled polyethylene 

sheet and are suitable to withstand damage from plant and hand tools. 

■ They are also suitable for fi bre optic cables. 

■ Cable tiles are fully jointed, laid overlapped and held fi rm with plastic jointing pegs. 

■ They are a suitable direct replacement for concrete covers and steel plate. 

■ These are generally supplied with standard print of “Caution - Fibre Optic Cables Below” or 

“Caution Telecoms Cable Below”. 

■ Bespoke Colour/Printline giving company name and their Emergency free phone number can 

also be supplied. 

Product code Description / product type Pack Qty 

5606 CABLE TILE 1000x150x11mm ‘Caution - 

Fibre Optic Cable’ 

500 

I I N N N N O O V V A A T T I I O O N N A A N N D D F F L L E E X X I I B B I I L L I I T T Y 

Y 

39 




FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


40 

All handling of cable ducts and loose protected microducts must be 

in accordance with Danish Standards DS 430 “code of practice for 

trenching of underground fl exible pipelines of plastic”. 

The following guidelines highlight a range of important aspects 

within these areas: 

1. Transport 2. Reception 3. Storage 4. Laying 5. Disposal 

1. Transport 

Transport, loading and unloading are all very important factors in 

ensuring the quality of the ducts. 

In the contexts of transport and storage, it is essential to take into 

account the relative softness and fl exibility of the duct material to 

prevent the ducts from becoming deformed and/or damaged. 

1.1 Ducts in set lengths 

We recommend handling the ducts for as long as possible in the 

packed bundles in which they are supplied. 

Ducts in set lengths should be loaded and unloaded with a forklift 

truck, with a crane, or manually by two people. 

The ducts must never be tipped off or thrown from the vehicle. In 

the case of manual handling, make sure that the ducts are never 

dragged along asphalt or other rough surfaces. 

For transport on lorries, the following conditions must be observed: 

When they are not bundled, the ducts must not overhang the rear 

edge of the lorry bed by more than 1 metre. 

For bundled ducts in wooden frames, the rearmost frame must lie 

on the lorry bed. 

1.2 Ducts in rolls on drums 

A forklift truck must always be used to move, load and unload ducts 

on drums. The truck operator must make sure to lift and carry the 

drums by their wooden frames. The drums must not be dropped from 

heights and must not be rolled over sharp objects. 

When loaded onto a lorry bed, each drum must always be securely 

chocked in place, and the drums must be positioned fl ange against 

fl ange. Each and every drum must be secured using transport straps. 

Ducts in coils are transported on pallets. The pallets may be stacked 

in two layers. 

2. Delivery 

On receipt of ducts, all material should be checked as the responsibility 

is normally transferred to the receiver upon delivery. 

3. Storage 

The ducts must be stored on a level surface without sharp edges and/ 

or stones. During storage and transport, the ducts must be positioned 

fl at and appropriately supported such that they are not subjected to 

unnecessary deformation. The surface may, for example, comprise of 

wooden battens spaced no more than 2 metres apart. 

The ducts must be stored in such a way that they are guarded against 

deformation and are not subjected to damaging infl uences. 


TUBE BUNDLE 

Handling guidelines for Loose Protected Microducts 

The ducts should not be stored in locations where they are subjected 

to direct sunlight for protracted periods, as this may cause the 

material to deteriorate. Nor should the ducts be allowed to come 

into contact with chemicals which may cause them to deteriorate. 

The maximum permitted storage period for ducts is one year. 

Coils of duct must be stored lying down. 

4. Laying 

Cable ducts, pressure ducts and loose protected microducts must 

all be laid in accordance with Danish Standards DS 430 “Code of 

practice for trenching of underground fl exible pipelines of plastic” 

and DS 475 ”Code of practice for the laying of underground fl exible 

pipelines of plastic”. 

Theoretical length of expansion or contraction of 

micro-ducts, in metres (without friction) 

Duct 

length 

in m 

Degrees (Celsius) 

L 5 10 15 20 25 30 35 40 

100 0.1 0.2 0.3 0.4 0.5 0.5 0.6 0.7 

200 0.2 0.4 0.5 0.7 0.9 1.1 1.3 1.4 

300 0.3 0.5 0.8 1.1 1.4 1.6 1.9 2.2 

400 0.4 0.7 1.1 1.4 1.8 2.2 2.5 2.9 

500 0.5 0.9 1.4 1.8 2.3 2.7 3.2 3.6 

600 0.5 1.1 1.6 2.2 2.7 3.2 3.8 4.3 

700 0.6 1.3 1.9 2.5 3.2 3.8 4.4 5.0 

800 0.7 1.4 2.2 2.9 3.6 4.3 5.0 5.8 

900 0.8 1.6 2.4 3.2 4.1 4.9 5.7 6.5 

1000 0.9 1.8 2.7 3.6 4.5 5.4 6.3 7.2 

1100 1.0 2.0 3.0 4.0 5.0 5.9 6.9 7.9 

1200 1.1 2.2 3.2 4.3 5.4 6.5 7.6 8.6 

1300 1.2 2.3 3.5 4.7 5.9 7.0 8.2 9.4 

1400 1.3 2.5 3.8 5.0 6.3 7.6 8.8 10.1 

1500 1.4 2.7 4.1 5.4 6.8 8.1 9.5 10.8 

1600 1.4 2.9 4.3 5.8 7.2 8.6 10.1 11.5 

1700 1.5 3.1 4.6 6.1 7.7 9.2 10.7 12.2 

1800 1.6 3.2 4.9 6.5 8.1 9.7 11.3 13.0 

1900 1.7 3.4 5.1 6.8 8.6 10.3 12.0 13.7 

2000 1.8 3.6 5.4 7.2 9.0 10.8 12.6 14.4 

5. Disposal 

The disposal of remainders of micro-ducts of any length (which may 

be polluted with soil, mud and/or other impurities) and of complete 

products is the responsibility of the duct manufacturer – in this case 

Emtelle Scandinavia. Alternatively, responsibility can be exercised via 

a company with the facilities for such disposal. Customers may return 

small volumes to Emtelle Scandinavia in Sdr. Felding, Denmark. For 

larger volumes (3000 metres or more), it is best to collect all used and/ 

or unused micro-ducts in a single location close to a three-phase 380 V 

power supply. 

NB! Temperature-related expansion and contraction of micro-ducts 

may occur. Emtelle Scandinavia therefore recommends laying 1 

metre of extra micro-duct in each hand hole. 



TUBE BUNDLE 

SUB-DUCT 




41 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


42 

Sub-Duct 

Subduct Premium, Standard and RHDPE 

Subduct Premium, Standard and RHDPE is available in various lengths and packaging types 

■ Premium Grade, exceptional performance and product features 

■ Standard Grade 

■ RHDPE, manufactured using recycled material to lower our environmental impact 

For sub-duct accessories, refer to page 76 


SUB-DUCT 

Subduct 

Coil length Drum Length Minimum 

OD mm 

nominal 

50m 100m 200m 250m 500m 1000m 750m 1000m 2000m 2500m 3000m 4000m 5000m 6000m 

Order 

Quantity 

16 ✓ ✓ 

up to 6000m 12000m 

18 

20 

25 

32 

35 

40 

50 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

1000m 

length are 

available 

in International 

markets 

up to 6000m 

up to 5000m 

up to 4000m 

up to 3000m 

up to 2500m 

up to 2000m 

up to 1000m 

12000m 

10000m 

8000m 

6000m 

4000m 

4000m 

4000m 

63 ✓ ✓ up to 750m 

3000m 

TECHNICAL DATA Premium Grade (nominal unless otherwise stated) 

SIZE SDR Mean outside 

Diam NOM 

OD ID 

I.D. 

nom 

Wall Thickness 

Nom 



Mass 

nom 

g/m 



kg kN 

16 12 8.0 16 12 2.0 85 85 0.85 MHT582 

18 14 9.0 18 14 2.0 96 90 0.90 MHT582 

25 20 10.0 25 20 2.5 168 170 1.7 MHT582 

25 21 12.5 25 21 2.0 139 140 1.4 MHT582 

28 24 14.0 28 24 2.0 162 160 1.6 MHT582 

31 25 10.3 31 25 3.0 251 260 2.6 MHT582 

32 26 10.7 32 26 3.0 260 260 2.6 MHT582 

32 27 12.8 32 27 2.5 220 220 2.2 MHT582 

32 28 16.0 32 28 2.0 179 180 1.8 MHT582 

34 28 11.3 34 28 3.0 278 270 2.7 MHT582 

35 28 10.0 35 28 3.5 329 330 3.3 MHT582 

35 30 14.0 35 30 2.5 242 250 2.5 MHT582 

37 32 14.8 37 32 2.5 257 250 2.5 MHT582 

38 32 12.7 38 32 3.0 323 320 3.2 MHT582 

40 32 10.0 40 32 4.0 425 430 4.3 MHT582 

40 33 11.4 40 33 3.5 381 370 3.7 MHT582 

50 41 10.9 50 40.8 4.6 612 610 6.1 MHT582 

50 42 13.5 50 42.6 3.7 544 540 5.4 MHT582 

63 50 9.7 63 50 6.5 1096 1100 11 MHT582 

SDR’ is the standard dimension ratio (OD / wall). Lower SDRs indicate heavy-duty sizes.

Sub-Duct 

Subduct OD 

mm 

SUB-DUCT 

TECHNICAL DATA Standard Grade (nominal unless otherwise stated) 

Subduct ID 

mm 


g/m 

Min Bend rad 

mm @ 20°C 


Max pull Generic 

Specification 

kg N 

16 12 2 8.0 84 320 80 800 MHT345 

20 16 2 10.0 108 400 100 1000 MHT345 

25 20.4 2.3 10.9 157 500 162 1600 MHT345 

32 27.6 2.2 14.5 197 640 200 2000 MHT345 

32 27 2.5 12.8 221 640 210 2100 MHT345 

32 26 3 10.7 261 640 240 2400 MHT345 

40 35 2.5 16.0 282 800 270 2700 MHT345 

40 34 3 13.3 333 800 330 3300 MHT345 

40 33.2 3.4 11.8 371 800 370 3700 MHT345 

40 32.6 3.7 10.8 403 800 380 3800 MHT345 

50 44 3 16.7 423 1000 400 4000 MHT345 

50 42 4 12.5 549 1000 520 5200 MHT345 

50 41 4.5 11.1 611 1000 580 5800 MHT345 

TECHNICAL DATA RHDPE Grade (nominal unless otherwise stated) 

Subduct OD Subduct ID Wall SDR Mass nom. Min Bend rad 

Max pull 

mm 

mm 

g/m mm @ 20°C 

kg N 

16 12 2 8.0 84 320 52 520 

20 16 2 10.0 108 400 65 650 

25 20.4 2.3 10.9 157 500 105 1050 

32 27.6 2.2 14.5 197 640 130 1300 

32 27 2.5 12.8 221 640 136 1360 

32 26 3 10.7 261 640 156 1560 

40 35 2.5 16.0 282 800 175 1750 

40 34 3 13.3 333 800 214 2140 

40 33.2 3.4 11.8 371 800 240 2400 

40 32.6 3.7 10.8 403 800 247 2470 

50 44 3 16.7 423 1000 260 2600 

50 42 4 12.5 549 1000 338 3380 

50 41 4.5 11.1 611 1000 377 3770 

TECHNICAL DATA LFH (nominal unless otherwise stated) 

SIZE SDR Mean outside I.D. Wall Thick- Mass nom Max Pull Generic 

OD ID 

Diam NOM nom ness Nom g/m kg kN Specifi cation 

20 16 10 20 16 2.0 172 45 450 MHT2367 

25 20 10 25 20 2.5 269 70 700 MHT2367 

32 26 10.7 32 26 3.0 415 100 1000 MHT2367 

40 33 11.4 40 33 3.5 610 160 1600 MHT2367 

50 41 11.1 50 41 4.5 977 250 2500 MHT2367 

63 50 9.7 63 50 6.5 1750 450 4500 MHT2367 



43 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions

Air Air Blown Fibre FttX Customers Fibre Products Products Tube Tube Bundle Sub-Duct Sub-Duct Accessories Installation Equipment Equipment Tools Tools Training Emtelle Offi ces ces Terms & Conditions 

44 

Sub-Duct 

Subduct Premium, Standard and RHDPE 

TECHNICAL DATA Aerial (nominal unless otherwise stated) 

SIZE SDR Profi le Height Mean outside 

OD ID 

diam. Nom 


SUB-DUCT 



I.D. 

nom 

Wall Thickness 

Nom 

Mass nom 

g/m 

Generic 


16 12 8 28 16 12 2 242 CP1059 

20 16 10 32 20 16 2 266 CP1058 

25 20 10 40.8 25 20 2.5 481 CP1117 

32 26 10.7 44 32 26 3 418 CP1056 

Accessories 

Refer to pages 76-78 for Sub-duct Accessories.

2 Fibre unit 

Figure-8 

Cable 

Aerial – Page 51 

DDrop tube b Cable Clamp 

AC68 

Bolt 

Suspension 

Clamp 

J-Hook 

bolt-through 

ACCESSORIES 

Customer 

Lead-In 

Point 

Bracket BBracket kt 






Dome Closure 

Mid-Blow 

Pre-Connect 

Fibre 

Branch 

Closure 

Cable Clamp AC10 

External Connectivity – Page 53 

Customer 

Connection 

Point 

Internal 

Y Branch 

Tube Tu Distribution 

Closure 

ACCESSORIES 

Indoor Tight 




Low Rise / Garden Style 

MDU 


MDU Cabinet 

Fibre Node 

I NI N NO OV VA AT TI OI ON N A AN ND D F FL LE EX XI BI BI LI LI TI TY Y 



PoP 

Internal Connectivity – Page 60 

High H Ris Rise ise eMD MD MDU MD MDU 



Microduct 

Installation 

Equipment 

Fibre Connectivity – Page 61 

Connectors – Page 72 

Access Chambers – Page 46 

Customer 

Connection 

Point 

Splicing Unit 

Internal 

Y Branch 

45 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


46 


ACCESSORIES 

Kitting: Pre-assembled, Pre-fi tted, Customised FttX Solutions 

as customised, preassembled 

units, making their deployment 

easier and faster. Kitting not only integrates products, it simplifi es the procedures 

required to install them. This further lessens technicians’ workloads, 

accelerates the installation process, reduces the investment per home and 

increases the total installation capacity. 

With the Kitting option, Emtelle can combine products to create value beyond 

the sum of the individual parts: we put more value in the box and take 

more labour out of it. We have established a dedicated unit that will be 

responsible for the complete and timely delivery of Kitting products, which 

Emtelle provides FttX solutions that signifi cantly reduce day-one Capital Expenses (CapEx). In the 

period 2005-2009, Emtelle has reduced CapEx per connected home by more than 35%. This reduction 

has been achieved as a result of : easier and faster installation, lower skill sets and reduced 

manpower required – they all lower initial investment. To these can be added another innovative 

way in which Emtelle reduces CapEx for its customers: Kitting. In Kitting, products are put together 

Telecoms Sectional Access Chambers 

Concrete Cover 

page 48 

we can develop on a project by project basis. Kitting 

provides an exceptional degree of simplifi cation and 

customisation for our customers, confi rming our position 

as the world’s foremost, most forward-thinking 

FttX solution provider. 

Preformed access chambers offer users de-skilled, fast track construction method with a single site visit without the need for concrete 

backfi ll. Installation carried out for BT, complete chambers were constructed from excavation to reinstatement in just over one hour. 

Chambers have been independently tested to meet the requirements for Class C250 of BS EN124:19954 making them suitable for all 

non-carriageway applications including areas subject to slow moving HGV loads. 

Frame 

page 48 

Manhole 

Step Iron 

page 50 

Sump 

Mini cable 

page 18 

Mini Cable 

Storage Reel 

page 50 

Locking Holes 



 

1300 

1200 

1100 

1000 

900 

800 

700 

600 

500 

400 

300 

200 

100 

2003 

Badge 

Labour 

Passive System Components 

= Capital Expense per home connected 

2004 2005 2006 2007 2008 2009 

Source: Emtelle 

Cable Bearer (x 2) 

page 49 

Locking Pin 

page 50 

Duct 2x 

Reduced CapEx 

-37%

ACCESSORIES 


STAKKAbox QUAD is available in standard 150mm deep structural twinwall ring section providing maximum depth fl exibility and 

strength. BT has approved the STAKKAbox QUAD system (sizes 2, 4 and 6) for use within its network. Duct entries are also simple to 

achieve using a standard hole saw mounted on a cordless drill. 

Advantages of the STAKKAbox QUAD 

Excellent side wall stiffness 

No requirement for concrete surround – ‘as dug’ or type 1 backfi ll will be suitable 

Perfect for overbuilding on an existing site 

No second visit to site required 

Deskilled installation process 

Ease of cutting duct entries 

No site material waste 

* Note: Carriage fee applicable on orders below M.O.Q. 

Product code STAKKAbox QUAD Minimum order Quantity* 

(Rings per Pallet) 

9947 FW1/EN1 600 X 450 X 150MM 40 

9948 FW2/EN2 725 X 255 X 150MM 40 

9766 FW4 /EN4 915 X 445 X 150MM 32 

9949 FW6/EN6 1310 X 610 X 150MM 30 

Product code STAKKAbox ULTIMA** Minimum order Quantity* 


9117 FW4 /EN4 915 X 445 X 150MM 32 

5397 FW6/EN6 1310 X 610 X 150MM 30 

70476 FW10/EN10 2885 X 710 X 150MM 15 

70475 FW11/EN11 1705 X 710 X 150MM 15 

9124 CW2 1220 X 675 X 150MM 24 

70474 CW3 1800 X 675 X 150MM 24 

70473 EN96 900 X 600 X 150MM 24 

70291 EN99 900 X 900 X 150MM 24 

** STAKKAbox ULTIMA All D400 rated 

Product code STAKKAbox MODULA*** Minimum order Quantity* 


70477 FW1 300 X 450 X 150MM 40 

70478 FW1/EN1 600 X 450 X 150MM 40 

70480 FW3/EN3 750 X 600 X 150MM 24 

70482 FW4 /EN4 915 X 445 X 150MM 32 

70481 EN96 900 X 600 X 150MM 24 

70479 ***CW1 600 X 600 X 150MM 24 

*** CW1 MODULA - IS D400 rated and thus can be used for carriageways 

Product code WEDGE BOX’S Minimum order Quantity 


41912 1419 380 X 230MM 26 

32415 1324 550 X 315MM 26 

73018 1730 730 X 460MM 20 


Kitting ■ 

Access Chambers ■ 

Aerial ■ 

Tube Bundle Connectivity – External ■ 

Tube Bundle Connectivity – External to Internal ■ 

Tube Bundle Connectivity – Internal ■ 

Fibre Connectivity ■ 

Connectors ■ 

Class C250 of BS N124:19954 making 

them suitable for all non carriageway 

applications including areas subject to 

slow moving HGV loads. 

Twin wall vertical ribs spanning 

between the walls and castellated 

to postively interlock with adjoining 

rings above & below. 

Wedge box 



47 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


48 


Covers and frames for Access Chambers 

Concrete Cover and Galvanised Steel Frame 

Suitable for use in footpaths, car parks, grass verges, and areas with slow moving traffi c including 

HGV’s. Cover and frames are certifi ed to the European Standard Class B125 of BS-EN124 and 

kite marked. Bespoke badging available on request. 

Ductile Iron Cover and Frames 


ACCESSORIES 

BADGING OPTIONS FOOTWAY COVER SIZES (CONCRETE) Minimum order COVERS PER 

UNBADGED CATV C&W 

Quantity (Pallet)* SET 

Product Code Product Code Product Code 

70352 70386 70350 FW1/EN1 300 X 450MM 30 1 

70358 TW2R 70356 FW1/EN1 600 X 450MM (RISING FRAME) 22 1 

4843 70354 70353 FW1/EN1 600 X 450MM 20 1 

9235 70360 70359 FW2/EN2 725 X 255MM 24 1 

4844 70338 70361 FW3/EN3 750 X 600MM 16 1 

9053 4816 4678 FW4 /EN4 915 X 445MM 16 1 

70365 70364 70363 FW5/EN5 550 X 315MM 16 1 

5090 4582 9563 FW6/EN6 1310 X 610MM 10 2 

4776 4776A 70368 FW10/EN10 2320 X 740MM 5 3 

70372 70179 9562 FW11/EN11 1705 X 710MM 5 3 

70349 EN96 900 X 600MM 12 1 

70292 EN99 900 X 900MM 5 1 

TW1R 70373 TW1 560 X 260MM (RISING FRAME) 35 1 

TW4R TW4/5 750 X 600MM (RISING FRAME) 12 1 

1419S 70347 1419 380 X 230MM (RISING FRAME) 30 1 



*Note : Breakage/Carriage fee per pallet applicable on orders below M.O.Q. 

Ductile iron one man-operable D400 covers and frames with a unique slide over action for safe 

easy opening. Cover and frames are certifi ed to the European standard Class D400 and D600 of 

BS-DN124 and kite-marked. 

Product Code Unbadged Load Rating 

Minimum order 

Quantity (Pallet)* 

COVERS 

PER SET 

5111 CW1 600 X 600MM 100MM DEPTH D400 10 2 



4716U CW2 1220 X 675MM 150MM DEPTH D400 6 4 


70502 EN96 900 X 600 X 150MM DEPTH D400 8 2 

70503 EN99 900 X 900 X 150MM DEPTH D400 6 2 

70504 EN99 900 X 900 X 100MM DEPTH D400 6 2 

70505 CW1 600 X 600MM 150MM DEPTH E600 6 2 

70506 CW2 1220 x 675MM 150MM DEPTH E600 6 4 




ACCESSORIES 


Ductile Iron Cover and Frames 

BADGING OPTIONS 

CATV C&W 

Product Code Product Code 

WELDED ON BADGES Load Rating 


Kitting ■ 


Aerial ■ 






Minimum order 


9561 70374 CW1 600 X 600MM 100MM DEPTH D400 10 2 






BADGING OPTIONS 

CATV C&W 

Product Code Product Code 

EMBOSSED BADGE Load Rating 

Minimum order 








Access Chamber Furniture - Bolt on 

COVERS 

PER SET 

COVERS 

PER SET 

Product Code WALL BEARERS Minimum order Quantity (Pack) Length (mm/ inches)) 

70616 WALL BEARER NO.1 - HOLE POSITIONS 1 25 178mm / 7" 







Product Code CABLE BEARERS Minimum order Quantity (Pack) Length (mm/ inches)) 

9991 CABLE BEARER NO.3 40 115mm / 4.5" 








49 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


50 


Access Chamber Furniture - Bolt on 

Access Chamber Furniture - Drop in 


ACCESSORIES 

Product Code ANCILLARY Minimum order Quantity (Pack) 

4500 LOCKING PINS 200 

4496 MANHOLE STEP INSITU 10 

9072 MANHOLE STEP BOLT ON 10 

4839 PLASTIC SUMP 25 

9499 FOUNDATION BOLTS 100 

9498 ANCHOR IRONS 5 

One of the novel features of STAKKAbox QUAD is that box furniture items drop into ready-made pockets within the chamber. 

Product Code Furniture Kit Minimum order Quantity (Pack)* 

70507 Drop-in furniture kit STAKKAbox QUAD FW 2,4,6 10 

Product Code ANCILLARY Minimum order Quantity (Pack)* 

4496D Manhole step – Drop-in STAKKAbox QUAD 10 


Minicable Storage Reel with Cover 

Termination Boxes 

Product code 9978 

Minicable Storage Reel is designed to provide storage of excess minicable for future maintenance 

and repair and includes a stainless steel cover which protects the reel and minicable in the manhole. 

The storage reel set comes complete with fi xing bolts to mount the storage reel and cover. 

Product 

Code 

Description Minimum order 

Quantity (Pack) 

4531 D-shaped Swivel Termination Box 50 

4604 Square SID Termination Box 130mm x 140mm x 75mm 50 

4579 Triangular Termination Box 50 

71133 Square Termination Box 115mm x 115mm x 75mm 50 



Aerial 

Aerial Branch Closure 

ACCESSORIES 

Product Code 9257 

The aerial branch closure is designed for use on either lashed or self-supporting Aerial product of 

up to 26mm in diameter. 


provides a free breathing continuous 

Aerial Distribution Point 

for use with lashed or self-supporting 

aerial cable 

maximum diameter of aerial cable -26mm 

spur cable outlet - maximum diameter - 

15mm 

housing - a one-piece polypropylene moulding 

all loose parts (except spur cable clamp) 

are captive 

Aerial Manifold Closure (6-4mm) 

Plug Removal Tool 

Wrap–around Closure 

Centre Point Blowing Dome 

main cable glands are pre-packed with mastic 

(additional mastic provided for fi nal packing) 

closed cell foamed PVC seals on re-enterable 

cover 

drain holes provided to allow the escape of 

any water that may accumulate within the 

closure 

ample space provided to allow the use of 

industry standard waterproof connectors 

IP42 rated 


A closure for connecting aerial drop microduct to DI/DB microduct bundles. Note that the aerial 

drop size is 6mm and the individual DI/DB microducts are 4mm OD. 


Developed to assist the removal of 6mm plugs from the Manifold Closure. 

A wrap around gel fi lled splice closure suitable for use in a 

Aerial application. The closure materials are UV-protected 

and are designed for deployment in positions open to the elements. 

Product Code Description 

71132 50/20 - 250 

70957 50/20 - 300 

71531 50/20 - 350 

71532 50/20 - 400 


Designed for management and storage of microducts and close-downs after installing air blown 

fi bre into protected microducts using centre-point blowing. FttX, aerial, underground and 

directly buried installations 


Kitting ■ 


Aerial ■ 






Dimensions 

60mm D x 351mm W x 135mm H 

Installation Instructions 

Refer to Aerial Installation Training 

Manual 



51 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


52 

Aerial 

Pole Fittings and Tools 

9246 

9247 

9249 

9255 

9354 


ACCESSORIES 

Universal Pole Bracket UPB Product Code 9246 

A bracket suitable for anchoring cable clamps holding overhead fi bre optic cables. Fits to poles 

of wood, or steel or concrete. 

Cable Clamp AC10 320 Product Code 9247 

A clamp suitable for anchoring Fig-8 cables that have a steel strength member. Has tapered grip 

action using jaws that penetrate the insulation and grip the steel directly. 

Not for dielectric s.m. 

Cable Clamp AC68L 260 Product Code 9248 

A clamp suitable for anchoring Fig-8 cables that have a GRP strength member. Has tapered grip 

action using jaws that grip the insulation over the GRP. 

Cable Clamp AC68 140 Product Code 9249 

A clamp suitable for anchoring circular drop tubes of 7mm diam. Has tapered grip action using 

jaws that grip the insulation over the drop tube. 

J-Hook for steel band: ‘JR-SB’ Product Code 9251 

Cable support fi xed to poletop using steel banding. Used to support overhead cable both during 

cable deployment, and through the cable lifetime 

J-Hook, bolt-through:‘JR’ Product Code 9354 

Cable support fi xed to poletop using through-bolt. Used to support overhead cable both during 

cable deployment, and through the cable lifetime 

Suspension Clamp, ’ARC’ Product Code 9252 

A dielectric clamp to hold the upper portion of a Fig-8 cable in a J-Hook. 

Order one J-hook for each ARC. 

Bolt 16 x 300mm Product Code 9253 

Bolt suitable for support brackets and J-hooks during their lifetime. 

Steel Banding, SB207 Product Code 9254 

Steel banding suitable for supporting J-hooks and UPB onto all pole types. Can be cut with snips. 

Uses buckles described below. 

Buckles for banding BIB20 Product Code 9255 

Buckles suitable for securing the steel banding to the pole. Can be secured with the tensioning 

tool described below. 

Tensioning Tool, BTS Product Code 9256 

Tool (screw-type) suitable for tensioning the steel band and securing with the appropriate buckles 

described above. 



ACCESSORIES 

Tube Bundle Connectivity – External 


Kitting ■ 


Aerial ■ 

Tube Bundle Connectivity - External ■ 





CENELEC, the European Standards Organisation, recognises the requirement for both sealed and unsealed closures in blown fi bre 

systems. In the case of sealed closures Emtelle provides these to Ingress Protection (IP) rating of IP68 as detailed in IEC 60529. 

Unsealed closures are intended as mechanical covers for blown fi bre systems which generally provide additional impact and crush 

protection. Unsealed closures do not contain exposed optical fi bre, only microduct, and where the microduct is jointed this is performed with 

sealed microduct connectors. At the current time there is only a committee draft standard for unsealed blown fi bre closures and the 

provisional IP rating of IP40 is proposed. Emtelle recognises this draft standard and rates its closures accordingly . 

Unsealed Sealed 

Degree of protection Mechanical Cover 

Protection against impact and crush 

Tube Distribution Closure (TDC) 

Emtelle’s Tube Distribution Closure (TDC) is a one-box solution that can be used in a variety of 

applications, including Fibre-to-the-Home, Business Parks, In-Building, Metropolitan Networks 

and Campus Builds. As part of the solution, the TDC can of course handle the 

majority of network designs. 

Enhanced network fl exibility 

The TDC has been especially designed as a multi-purpose closure to cover a variety of applications 

such as single tube connections to buildings, up to 38mm tube bundle connections and 

tube break-out in H, T and Y confi gurations. As well as being able to branch off single microducts, 

the TDC can also be used with different adaptors for 19 way, 12 way and 7 way 5mm tube 

bundles and 24 way 3mm tube bundles. In addition, we offer a 6-way grommet that allows up 

to six single DB microducts to be branched from a single port. The TDC can also be deployed as a 

repair closure if only a few tubes have been damaged. 

Features and benefi ts 

accepts tube bundles and sub-ducts up to 38mm in diameter 

one-piece grommet and seal arrangement 

manifold option allows 6 x 1DB to be dropped off from 1 port 

captivated screws in lid portion allowing invervted installation 

can be re-entered 

can be retro-fi tted to existing tube bundles / sub-ducts 

straight through H and T confi gurations possible 

lightweight: 1.2kg 

IP 40 rated (provisional) 

Protection against impact, crush, 

full water immersion 

Example applications Tube joint closures Splice closures and high specifi cation 

tube joints 

IEC 60529 rating IP40 (provisional) IP68 

Tube Distribution Closure (TDC) 

6 way Grommet 

Dimensions 

316mm L x 220mm W x 70mm H 


Refer to document UK II 7514. 

Tube confi gurations for the TDC 

Standard TDC 

19 way DB 5mm adaptor (Product Code 9113) Branch out 

(Product Code 7514) 

12 way DB 5mm adaptor (Product Code 9112) Branch out or straight joint 

24 way DB 5mm Branch out 



6 way Grommet (Product Code 7717) Up to 6 x 1DB 3mm or 5mm branching (from port 3 or 4) 



53 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


54 


Y-Branch 

Accepts 24way 5mm DB tube bundles 

maximum 4 x 1DB 5mm can be dropped off 


ACCESSORIES 

3mm 

Product Code 7954 (3mm) Product Code 9169 (5mm) 

A compact, light-weight closure that Emtelle has developed for a range of applications including 

Fibre-to-the-Home. 

The Y-Branch has been developed for blown fi bre in a Direct Bury application. 

microducts of either 3mm or 5mm diameter are placed into the Y-Branch where they can be 

branched off into single microducts. 

Depending on the tube diameter used, up to six microducts can emerge from each closure. The 

Y-Branch can be used at several locations in the networks and therefore creates greater net- 

accepts 24 way 3mm DB 

work fl exibility. Since all microducts emerge from the branch in the same direction, the closure 

tube bundles 

maximum 6 x 1DB 3mm can be 

has the added advantage of being able to be installed in narrower-than-normal trenches. 

dropped off Dimensions 


300mm L x 160mm W x 70mm H unused 1 way drops are sealed using plugs 

5mm 

(provided) 


can be re-entered 

Refer to document UK II 7954 and 9169 can be retro-fi tted to existing tube bundles 

IP40 rated (provisional) 

Lightweight – 1.2kg 

new design enhancements provide signifi cant time 

savings for installers. 

H-Branch Closure 


This is an environmentally sealed closure for outside fi bre management in the network. 

The product is a cold applied re-usable closure. 


4 ports: 2 at each end re-enterable 

IP68 rated suitable for fi bre unit and minicable installations 

Specifi cations 

Dimensions: Overall length 470mm, Overall width 210mm 

Working envelope 240-280mm x 135mm. Port capacity: 45mm 



ACCESSORIES 


CL01 - In-line Branch Closure 

Product Code 9501 (incl 6 way grommet) 

A direct buried closure for use in a fi brefl ow solution. 


4 ports: 2 at each end 

suitable for fi bre unit and minicable installations 

IP68 rated 


Dimensions: 405mm L x 155mm W x 125mm H. Port capacity: 40mm 


Refer to document UK II 9500 

Elongated Closure 50mm 


The 50mm Elongated Closure is suitable for underground use, to give mechanical protection to 

duct or direct bury tube joints. Simple to use without any tools, the closure can be confi gured for 

use in-line with 32mm, 40mm or 50mm ducts with the option of branching to 12mm or 40mm 

ducts. 


Dimensions (nominal) 900 mm x 120 mm x 95 mm 

3A In-Line Closure 

Product Code 7247 without Pressure Valve 

The 3A in-line closure is an environmentally sealed closure for tube management in the outside 

plant network. The product is a cold applied re-usable closure system. 


2 ports at one side, 4 at the other 

IP 68 rated 

suitable for repair (see Rapid Repair Kit) 

and branching applications 


Dimensions: Length 648mm, Internal diameter 100mm, 

External width 160mm, Tube bundle diameter range 7 – 40mm 



a metal basket houses tube bundle attachment 

brackets 

easy to re-enter and re-close 


Kitting ■ 


Aerial ■ 








55 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


56 


Elongated closure, 4-way 

Elongated Closure, 2-way 50mm Straight In-Line 

50mm In-Line Closure – Outlets 

50mm In-Line Closure - Port Reducers 

Product code Port Dimensions (mm) 

20 0170 032 32/32/32/32 

20 0170 036 40/40/2 x 16/2 x 16 

20 0170 039 40/40/32/32 

20 0170 040 40/40/40/40 

20 0170 050 50/50/50/50 


ACCESSORIES 

A closure consisting of two halves which can be easily aligned and assembled together and 

manually tightened. The clamping nuts are of a splittable type and shall have suffi cient strength 

to guarantee long term performance and repeated assembly. The closure can be assembled and 

disassembled without the use of tools. IP 40 rated (provisional) 


A direct bury or direct installation straight through joint that has sealing capability for 50mm product. 

Various port adaptors are available to convert the 50mm port to a smaller size. There is also an 

outlet available that allows up to two microducts to be brought out from the closure. 



The output port of the 2 x 12mm outlet fi ts into the knock-out located on the top of the 50mm 

in line closure, product code 9027. 


The Clamp outlet is an addition to the 50mm in-line closure (product code 9027) that allows 

a 40mm product to exit from the closure, when used in conjunction with a port reducer there 

is the possibility of having 2 x 1DB 10mm exiting from the one port (a plug is supplied with 

the reducer if only 1 x 1DB10mm is being used. The clamp outlet fi ts into one of the knockout 

sections contained within the top of the in-line closure. 

The Port Reducer has the necessary sealing arrangement to protect the inner cavity against 

signifi cant ingress of mud, sand and debris. The connector can be assembled and disassembled 

without the use of tools. There are a range of sizes available to convert the port size of the 

50mm in-line closure to a smaller size. 

Product Code Description Minimum order quantity 

9046 50/40mm Port Reducer 1 bag of 10 

9047 50/32mm Port Reducer 1 bag of 10 



ACCESSORIES 


50mm In-Line Closure - 40/2x16mm Port Reducer 


The Port Reducer has the necessary sealing arrangement to protect the inner cavity against 

signifi cant ingress of mud, sand and debris. The connector can be assembled and disassembled 

without the use of tools. There are a range of sizes available to convert the port size of the 

50mm in-line closure to a smaller size. Product code 9048 is used in conjunction with 40mm 

outlet (product code 9049). 

Split Connector 

The split connector is used for repairing damaged ducts. 

Product code Item name 

073800 132 32 mm split connector 



073810 132 32 mm half ducts – 2 metres (set) 



19998 175 110 mm lead-in bushing w/ foam rubber for micro-ducts 

1DB Joint 


A direct bury closure, to be used as a joint for 1DB 5mm. 


Accommodates DB microducts from 

6mm to 12mm in diameter 

Also available in the following 

diameters: 23, 29, 33, 38mm. 

Speed of assembly 

Dimensions (assembly) 

165mm (approx) W x 26.5mm Dia 



No tools required for the assembly 

No heat source required 

IP40 rated (provisional) 


Kitting ■ 


Aerial ■ 








57 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


58 


Rapid Repair Kit 


ACCESSORIES 

A repair kit comprising a central body and heat shrink sleeving designed to provide protection 

where Tube Bundles have to be joined. 


accepts Direct Burial (DB) tube bundle 

easily applied 

metal-free 



Product code Central body ID/OD Number of heat 

shrink sleeves 

Heat shrink sleeve 

range before/after 

heating 

Max number of 

repair joints from 

one kit 

Typical Fibrefl ow- 


9076 25/20mm 6 pairs 32mm/8mm 6 1 way or 2 way 

9077 32/26mm 6 pairs 40mm/13mm 6 2 way or 4 way 

9078 40/32mm 4 pairs 50mm/16mm 4 7 way 

9079 50/40mm 4 pairs 69.9mm/25.4mm 4 12 way 

1 Way DB Repair Joint 

The 1 way DB (repair) Joint has been designed to provide protection where Emtelle’s 

Direct Buried, microduct has to be joined. This would be necessary where a repair 

is required or where an installer has previously taken a tube out of a closure and now requires to 

extend the tubing to a customer’s premises. 


7787A When using a 3mm x 2.1mm microduct 

7787B When using a 5mm x 2.1mm microduct 

7787C When using a 5mm x 3.5mm microduct 

7787D When using an 8mm x 6.0mm microduct 

7787E When using a 10mm x 8.0mm microduct 



ACCESSORIES 

Tube Bundle Connectivity – External to Internal 

Customer Pole Furniture Lead In Point 


This unit enables external cable to be passed through the building fabric from an outside wall 

and is typically used for fi bre to the home. This unit can only accommodate a single 

micro duct. There is space inside this unit to fi t a gas sealing connector if required. 


can be readily fi xed to walls 

manufactured from UV-resistant material 

can accommodate both 3mm and 5mm 1 

way DB 



MDU Customer Lead In Point 

transition point between internal and external 

provision of secure long-term bend protection 

easy to use and install 

IP55 rated 


The MDU Customer Lead In Point is designed to be fi xed directly to the corridor wall 

to provide a method of secure connection between the corridor of MDU and the in-house network. 


Can be readily fi xed to walls 

Can accommodate b-shape product, 3mm and 5mm microduct 

Transition point between the MDU corridor into the customer premises 

Provision of secure long term bend protection 

Easy to use and install 

External customer lead-in (Small) 


The External customer lead-in (small) has been designed to accommodate fi bre cables 

and may also accept 3mm tubes, the bend radius has been designed to be used with G657 

fi bre types. This unit consists of the external customer lead-in cover (Grey) and the customer 

lead-in. Additional items may be required as shown under Emtelle Code 71501. 

External customer lead-in (Medium) 


The External customer lead-in (Medium) has been designed to house a drop duct 

(up to 54mm diameter) exiting from the ground, to a position on a vertical wall where fi bre is 

required to penetrate into the building. This system can be used to house both copper and fi bre 

cables as well as Blown Fibre single tubing up to a diameter of 5mm. This unit can be cut to 

length to fi t most entries from 30cm above ground to 75cm above ground. 

External customer lead-in (Large) 


The External customer lead-in (Large) has been designed to house a drop duct 

(up to 54mm diameter) exiting from the ground, to a position on a vertical wall where fi bre is 

required to penetrate into the building. This system can be used to house both copper and fi bre 

cables as well as Blown Fibre single tubing up to a diameter of 5mm. This unit can be cut to 

length to fi t most entries from 32cm above ground to 82cm above ground. 


Kitting ■ 


Aerial ■ 






Dimensions 

54mm D x 43mm W x 182mm H 

Dimensions 

50mm x 70mm x 18mm 



59 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


60 

Tube Bundle Connectivity – Internal 

3 Port ITFP 

Dimensions 

overall: 390mm L x 240mm W x 68mm H 



4 Port ITFP 

Dimensions 

overall: 




Y-Branch (Indoor) 

Dimensions 




Internal Customer Lead-in (Small) 


ACCESSORIES 


Internal closures have been designed specifi cally to meet the demands of in-building applications 

where branch fl exibility is a must. Two versions are available with the smaller unit 

capable of being made secure-proof to prevent tampering. 


ports can accept a range of Low Fire Hazard tube bundles up to 19-way 

all parts are made from fl ame-retardant materials 

allows individual tube breakout and re-routing 

bend radius managers prevent microducts being bent beyond the minimum radi 

retro-fi tting to intercept existing part-populated tube bundle is possible 

external / internal interface interstitial gas blocking possible 

ports identifi able by means of a recessed name plate 



Internal closures have been designed specifi cally to meet the demands for in-building applications 

where branch fl exibility is a must. Two versions are available with the smaller unit capable 

of being made secureproof to prevent tampering. 

Features 

ports can accept a range of Low Fire Hazard tube bundles up to 19-way 

all parts are made from fl ame retardant materials 

allows individual microduct breakout and re-routing 

bend radius managers prevent microducts being bent beyond the minimum radi 

retro-fi tting to intercept existing part populated tube bundle is possible 

external / internal interface interstitial gas blocking possible 

ports identifi able by means of a recessed name plate 



The Y-Branch Closure (Indoor) is a compact, lightweight, indoor closure developed 

primarily for Fibre-to-the-Home and datacoms network applications. With its simple design, the 

product can be installed extremely easily and rapidly. Developed in cooperation with Emtelle’s 

customers, the Y-Branch Closure (Indoor) meets a strong market demand for closures that 

increase network fl exibility and speed, while signifi cantly decreasing network investment costs. 


compact design 

uses 7,12,19 or 24 way LFH tight protected microduct as a backbone 

up to six individual LFH microducts may be branched 

shell made from robust, low fi re hazard material 

re-enterable, enabling addition or removal of individual microduct drops 

directly fi xable to a riser or convenient wall 

able to accommodate gas blocking connectors if required 



The Internal customer lead-in (Small) can be used in conjunction with Emtelle Code 71502. 

The internal customer lead-in consists of:- 

Internal CLI cover (white) 

customer lead in (from the internal side to the external, or through an internal wall, if required) 

8mm diameter protective conduit (for protecting tube and cable when positioning them though 

internal or external walls) 

Additionally, a Customer splicing point CLI is supplied, which can fi t into a 14mm diameter predrilled 

hole into a compatible surface mounted fi bre termination box at the other side of a wall. 

Internal Customer Lead-in (Medium) 


The Internal customer lead-in (Medium) is used in ‘New Build’ FTTH solutions 

where the drop duct has been brought into the meter cupboard within the home. This unit has 

the ability to fi t around existing skirting boards within the home varying from 75mm to 225mm 

in height. A protecting conduit is then used to cover the fi bre cable or Blown Tube all the way to 

the termination unit which is located in the meter cupboard. This unit is suitable for up to 6mm 

diameter drop tube. 



ACCESSORIES 

Fibre Connectivity 

Customer Connection Point (CCP) 


The Customer Connection Point is a compact, multi-functional wall-mounted closure that forms 

the fi nal part of the fi bre-to-the-home solution. 

The CCP can accept microducts of between 3mm and 8mm in diameter. The fi bre outlets are 

either two SC connectors or two duplex (double) LC connectors. Customers can choose to have 

the fi bres spliced either mechanically or by fusion. For connector protection, an optional connector 

guard is supplied with every kit. 

Each kit includes a set of endplates to suit different microduct sizes, as well as screws and 

fasteners for the complete installation. 


attractive slim design ease of installation 

multi-functionality IP 54 rated (provisional) 

cost-effective solution 

Customer Connection Point (CCP) Compact 


Used as a fi bre outlet unit within a building. The unit can be fi xed to a wall by using the screws 

and plugs supplied. Fibre is blown through a small tube into the unit and terminated using a 

fi eld terminated connector or spliced onto a pigtail. Pre-terminated fi bre can also be blown 

from the unit back to a cabinet or some other splice point. 

Dimensions 

86mm x 86mm x 31mm 

Fibre Unit Storage Box 


Designed for storage of up to 40m of 2f or 4f blown fi bre at a customer drop without the need 

for access to the premises. When the customer requires connecting, the fi nal drop can be 

installed without the need for blowing equipment. 

Dimensions 

150x150x40mm 

FTTx Optical Fibre Distribution Box – 16 fi bre 


External wall-mount optical distribution box offering fl exible patch, splice and splitter solutions 

for FTTx networks. Designed for pole or wall mounting. 


Kitting ■ 


Aerial ■ 



Tube Bundle Connectivity - Internal ■ 



Dimensions 

180mm (150mm without the connector 

cover) L x 100mm W x 20mm H 

Installation instructions 




61 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


62 


Cabinets 


ACCESSORIES 

Outdoor Street Cabinet Product code 9799 

This outdoor cabinet is made of steel with polyester coating. The termination box which houses 

the splice cassettes is made from plastic. Cabinet Dimensions 675x465x200mm 

Fibre Distribution Cabinet Product Code 71159 

The fi bre distribution cabinet is custom made for the blown fi bre solution and is 

designed for FTTH applications with high density optical fi bre terminations and splicing. The 

product can be used to house splitter modules, fi bre splicing and termination and also fi bre 

management. 



ACCESSORIES 

ACCESSORIES 


Cabinets 9 Port Base Small Dome Closure 

Product Code 9040 (ANT mechanical splice protectors) 

Product Code 9040HS (Heat shrink splice protectors) 

This small dome closure is a combination fi bre organiser and cable closure designed to provide 

environmental and mechanical protection for joints for all common types of fi bre optic cables. 

The closure system consists of a base assembly and dome together with dome sealing and cable 

termination kits. This kit comes with 2 x B4 Cableloks, for minicables of diameter 4.8-9.0mm. 

Cablelok is part of the system. 

Features 

can be used in underground or aerial applications 

compatible with heat shrink sleeve and Cableloks 

up to 72 fi bres can be spliced 

Length 50.5mm 

Port Confi guration 

FRBU 9 PORT BASE 

CONFIGURATION 


Kitting ■ 


Aerial ■ 






diameter 1.30mm 

Number of ports Port Port 

Port Length Heatshrink (Y/N) Cablelok 

Dimensions 

(Y/N) 

1 L X66, Y36 73 Y Y 

4 B 19 55 Y Y 

4 R 12 35 Y Y 



63 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


64 


FDN – Fibre Distribution Node 

FDN Dimensions and Splice Capacity 

Cover Reference Closure Width 

(mm) 

D1 x D2 


ACCESSORIES 

ACCESSORIES 

ACCESSORIES 

The FDN is a medium to large oval shaped cap ended closure with a high number of small cable ports. 

■ Up to 432 fi bre splice capacity 

■ Ideal for FTTH Network applications, especially last mile/kilometre 

■ 58 round ports and 1 oval port (for loop through cable) 

■ Industry leading 52 drop ports accommodating up to 104 customer drop fi bres 

■ Suitable for blown fi bre/cable installations 

■ Accommodates up to 36 single element or 72 single circuit trays or a combination of both 

■ Can be confi gured with a fi bre storage basket for loop through applications 

■ Available in 3 different lengths 

■ Cablelok ready 

■ Oval shape for use where space is limited 

■ Quick release cover clamp 

■ Accessory wall mounting bracket and stainless steel wall mounting strap kits available 

■ for use in underground, direct burial or aerial installations 

FDN Port & Cable Details 

Port Number of 

Ports 

D1 

Description Product 

Code 

12 x Heatshrink 71479 

12 x ANT 71480 



D2 

Cable Range (mm) 

Cablelok Heatshrink 

L 1 2 x 5.5 – 20.0 2 x 10.0 – 24.0 

T 2 15.5 – 29.0 8.0 – 35.0 

S 4 8.0 – 26.0 8.0 – 26.0 

B 2 4.8 – 16.5 6.0 – 19.0 

R 52 1.7 – 9.5 - 

Closure Length 

(mm) 

L 

AB length FDN 

Single Element (SE) Tray Product Code 

Tray Count Max Splice Capacity 

A 222 x 312 455 *6 (1) 72 71470 

AB 222 x 312 561 12 (2) 144 71471 

B 222 x 312 663 24 (4) 288 71472 

*Single tray count (tray pack/order multiple) SE -12 standard splices per tray 

Splice Tray 

64

ACCESSORIES 

ACCESSORIES 


UFC – Universal Fibre Closure 

The UFC is a high fi bre capacity cap ended ready access closure. 

■ Up to 720 fi bre splice capacity 

■ Ideal for high fi bre/splice count FTTX and trunk applications 

■ 28 round ports and 2 oval ports (for loop through cable) 

■ Accommodates up to 60 single element 

■ Can be confi gured as a double tray stack for high splice counts 

■ Fibre loop storage basket available with the single stack confi guration 

■ Available in 3 different lengths 

■ Cablelok ready 

■ Quick release cover with clamp 

■ Pressure release valve 

■ Accessory wall mounting bracket and stainless steel wall mounting strap kits available 

■ For use in underground, direct burial or aerial applications 

UFC Port & Cable Details 

Port Number of 

Ports 

BC length UFC 

Single Stack 

Cable Range (mm) 

Cablelok Heatshrink 

L 1 2 x 5.5 – 20.0 2 x 10.0 – 24.0 

LM 1 2 x 4.0 – 15.0 2 x 8.0 – 22.0 

T 2 15.5 – 29.0 8.0 – 35.0 

S 10 8.0 – 26.0 8.0 – 26.0 

B 16 4.8 – 16.5 6.0 – 19.0 

UFC Dimensions and Splice Capacity 

Cover 

Reference 

Closure 

Width 

(mm) 

D1 x D2 

Closure 

Length 

(mm) 

L 

Single Tray Max Splice 

Capacity 

BC length UFC 

Double Stack 

Splice Tray 


Kitting ■ 


Aerial ■ 






Single Element (SE) Tray 

Product 

Code 

Description Product 

Code 

12 x Heatshrink 71479 

12 x ANT 71480 



D1 

Double Tray Max Splice 

Capacity 

Product 

Code 

B 275 x 310 549 *12(2) 144 71476 24 (4) 288 71481 

BC 275 x 310 598 18 (3) 216 71477 36 (6) 432 71482 

C 275 x 310 749 30 (5) 360 71478 60 (10) 720 71483 

*Single tray count (tray pack/order multiple) SE -12 standard splices per tray 

D2 

65 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


66 


Cablelok 

Accessories 

Port Opening Tools 


70693 R Port 

70260 B Port 

70261 S Port 

9417 T Port 

71520 T/L Port 

Wall Mount Bracket 



ACCESSORIES 

ACCESSORIES 

The Cablelok mechanical seal enables fast safe cable installation, providing a highly repeatable and 

consistent seal between the cable and the closure port with excellent non-leak performance. 

Selecting the correct Cablelok 

Each port size on the HellermanTyton closures has a unique identifi er and a dedicated series of 

Cableloks (i.e. R, B, S, T, LM or L). Every Cablelok within a series is specifi cally designed to accommodate 

a range of cable diameters. Achieving the required seal performance is simply a case of selecting 

the correct Cablelok for the port and cable combination being used. 

Step 1: Determine the diameter of the cable being used. 

Step 2: Choose the appropriate closure port to be used and hence port identifi er. 

Step 3: Identify the correct Cablelok using the port and cable ranges shown below. 

Port Type Description Product Code 

CABLELOK-B10 4.8 - 9.0MM X 1 70284 

B 

CABLELOK-B20 8.0 - 14.0MM X 1 7613 

CABLELOK-B30 13.0 - 16.5MM X 1 70253 

CABLELOK-R40 3.8 - 5.2MM X 1 70691 

R 

CABLELOK-R50 5.2 - 8.0MM X 1 

CABLELOK-R70 6.0 - 8.5MM X 1 

70692 

71506 

CABLELOK-R80 8.0 - 9.5MM X 1 71507 

CABLELOK-S10 5.0 - 8.5MM X 1 71508 

CABLELOK-S20 8.0 -12.0MM X 1 71509 

S 

CABLELOK-S30D 10.0 - 11.5MM X 1 71510 

CABLELOK-S40 12.0 - 16.0MM X 1 70254 

CABLELOK-S50 16.0 - 20.0MM X 1 71511 

CABLELOK-T10 15.5 - 22.0MM X 1 71512 

T 

CABLELOK-T20 20.5 - 23.5MM X 1 

CABLELOK-T30 23.5 - 25.5MM X 1 

71423 

71513 

CABLELOK-T40 24.5 - 29.0MM X 1 71425 

CABLELOK-L10C 5.5 - 9.5MM X 1 71514 

LC 



CABLELOK-LM10C 4.0 - 6.5MM X 1 71516 

LM 

CABLELOK-LM20C 5.5 - 9.0MM X 1 

CABLELOK-LM30C 8.5 - 12.0MM X 1 

71517 

71518 

CABLELOK-LM40C X1 71519 

70694 FRBU/FST Wall Mounting Bracket 

70703 FDN Wall Mounting Bracket 

71521 FML Wall Mounting Bracket 

71522 UFC Wall Mounting Bracket 



ACCESSORIES 

ACCESSORIES 


FIST-GCO2 Dome Closure (for heat shrink) 

The generic closure FIST-GCO2 is an environmentally sealed enclosure for the fi bre management system 

that provides the functions of splicing and passive component integration in the external network. The 

product can be tailored to almost any required confi guration by adding splicing and/or passive device 

sub-assemblies. The FIST-GCO2 has provision for all cable termination and sealing requirements. The 

closure is a single-ended design made of a thermoplastic material. The base and dome are sealed with 

a clamp and an O-ring system. One oval entry port for looped (uncut) cable and six or sixteen round 

ports for single cable entry/exit are provided in the base. The cable seals are manufactured from heatshrinkable 

material. The UMS (Universal Mounting System) profi les provide the foundation for mounting 

combinations of SOSA2 (Splicing Only Sub-Assembly) and/or SASA2 (Splitter Array Sub- Assembly) 

modules, which consist of a modular groove plate and trays. Uncut loose buffer tube storage space is 

available between the two UMS profi les; 

for central core applications, storage 

baskets are available. 

Length Trays / Fibres SE 

A 

6 round + 1 oval 

GCO2-BC6-NN GCO2-BD6-NN GCO2-BE6-NN 

Dimensions mm L 488mm 566mm 700mm 

A 30mm 30mm 30mm 

B (B*/B**) 30 (20/13.5) mm 30 (20/13.5) mm 30 (20/13.5) mm 

C 82mm 82mm 82mm 

D 247mm 247mm 247mm 

D with clamp 285mm 285mm 285mm 

SC Tray Capacity1 28 x 2 42 x 2 58 x 2 


Kitting ■ 


Aerial ■ 






1 For blown fi bre applications it is recommended to allow 26 UMS for easy microduct handling with space for water blocking devices. 

All domes include base, UMS profi les (height depending on closure size), dome, clamp, O-ring, 2x FAS block pre-installed (including 2 tube 

holders each, cap and wedge), 2x Velcro, 2x traylids (including fi bre guiding pin), silica gel, Allen key, and installation instructions. 

Splice trays, Splitter modules and sealing kits should be ordered separately. 

Splice Trays 


70722 2 Tray Module, heat shrink type (Single Element SE, max 12 splices per tray) 

7988 4 Tray Module, heat shrink type (Single Element SE, max 12 splices per tray) 

9591 4 Tray Module, ANT type (Single Element SE, max 12 splices per tray) 

7975 8 Tray Module, heat shrink type (Single Circuit SC, max 4 splices per tray) 

Seal Kits include 

■ Heat shrink sleeve with adhesive and 

activation spots 

■ Aluminium tape 


7973 Oval Port Seal Kit (cables 12-25mm) 

7974 Round Port Seal Kit (cables 5-30mm) 

Splitter options – contact your local Emtelle representative 

Round Base type: 

B 


C 


BC - 488mm 28 / 320 7963 71523 7966 

BD - 566mm 40 / 480 7964 71524 7967 

BE - 680mm 56 / 672 7965 71525 7968 

■ Cleaning wipes 

■ Sandpaper 

■ Strength member fi xing 



67 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


68 


FIST-GCOG2 Dome Closure (for gel seal) 

FIST – GCO2-F (for heat shrink) 


ACCESSORIES 

ACCESSORIESS 

The generic gel closure FIST-GCOG2 is the environmentally sealed, fully mechanical enclosure 

for the fi bre management system that provides the functions of splicing and passive component 

integration in the external network. 

70721 70263 new 

GC0G2- DC6 GC0G2- DD6 GC0G2- DE6 

Dimensions mm L 568 645 753 

D 247 247 247 

D with clamp 291 291 291 

Fibres Trays Fibres Trays Fibres Trays 

Single Circuit Splicing Capacity 80 40 144 72 208 104 

Single Element Splicing Capacity 240 20 432 36 624 52 

The generic closure FIST-GCO2-F is the environmentally sealed 

enclosure for the fi bre management system that provides the 

functions of splice and passive component integration in the 

external network. 

GCO2-FC GC02-FD 

Dimensions mm L 384 432 

W1 279 279 

W2 150 150 

A 30 30 

B 82 82 

C 30 30 

Fibres Trays Fibres Trays 

Single Circuit Splicing Capacity 32 16 48 24 

Single Element Splicing Capacity 96 

(120) 



8 

(10) 

Round Base: 

Length Trays / Fibres SE D 

DC - 568mm 20 / 240 70721 

DD - 645mm 36 / 432 70263 

DE - 753mm 52 / 624 71526 

Length Trays / 

Fibres SE 

Flat Base 

D 

6 round / 1 oval 

E 

8 round 

FC - 384mm 8 / 96 71527 71528 

FD - 432mm 12 / 144 70097 71529 

144 

(180) 

12 

(15)

ACCESSORIES 

ACCESSORIES 


Splice Protectors 

Product Code Description Quantity 

7914T Crimp splice protector 150/box 

9601S Heat shrink splice protector 40mm 4/bag 

7610 Heat shrink splice protector 45mm* 100/bag 

*Different sizes available on request 

Patchcords and Pigtails 

Product codes: 9518, 9519, 9520, 9520B, 9521, 9521B 

Patchcords and Pigtails using G652 compatible optical fi bre, terminated with SC/PC or SC/APC 

connectors. Designed for multiple matings. Connectors shall meet the requirements given in the 

Technical Specifi cation below. 

Material/Technical Specifi cation 

Emtelle Product Code 9518 9521 

9521B 

Notes: 

1. Insertion Loss not exceeding 0.30 dB when tested against a concentric master cord. 

Further Information 

■ Pigtail cordage ‘easy strip’ (buffer material can be removed in 0.25m whole segments). 

■ Each connector is capped (sealed) against dust and damage to the ferrule. 

■ The patchcords are individually packed with their test results and identifi cation. 


Kitting ■ 


Aerial ■ 






9519 9520 

9520B 

Description SC SM Simplex Patchcord SC SM Pigtail SCA SM Simplex Patchcord SCA SM Pigtail 

Length 3.2 m 9521 

9521B 



0.5 m 

1.5 m 

3.2 m 9520 

9520B 

Connector/Cable Colour Blue/Yellow Blue/Yellow Green/Yellow Green/Yellow 

Cable Diameter 2 mm 900µm 2 mm 900µm 

Fibre Type G.652D 

Insertion Loss, typical 0.2 dB 

Insertion Loss, max 0.3 dB 

Return Loss, typical 52 dB 52 dB 62 dB 62 dB 

Return Loss, minimum 50 dB 50 dB 60 dB 60 dB 

Temperature, operation -40 ~ +75 ºC 

Temperature, storage -55 ~ +85 ºC 

Impact (drop) 1.5m drop onto concrete 

Cable torsion 5N, 2.5 turns each direction (5 cycles) 

Cable pulling Min 10N for 60s 

Vibration 10-55Hz 

Specifi cations IEC 60874-14-5 IEC 60874-14-5 IEC 60874-14-10 IEC 60874-14-10 

Measurements IEC 61300-3-4/6 

Mating Cycles 500 

7914T 

7610 

0.5 m 

1.5 m 

69 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


70 


ODF Solutions 


ACCESSORIES 

Emtelle can provide ODF solutions for projects, including: 

■ 19” and ETSI racks 

■ Pre fi tted shelves with splice trays and pigtails and adapators 

■ Pigtails and Patchcords 

If the product you require is not listed in the brochure, contact your local Emtelle representative to discuss your requirements. 

Wall Mount Tube Management Box 

12 Port Wall Mount Fibre Termination Box 

24 Port Wall Mount Fibre and Tube Termination Box 

Wall Mount Splitter Box with modules 

Rack Mounted Splitter Box with modules 


Designed for microduct termination and management of up to 24 microducts. Suitable for 

applications requiring microduct termination while utilising a minimum of space. 


Designed for fi bre termination up to 12 fi bre. Suitable for applications requiring patching, 

splicing of single mode or multimode fi bres and cross connect while utilising a minimum of 

space. 


Designed to cater for up to 24 fi bre and tube termination. The wall mount fi bre termination box 

is suitable for applications requiring patching, splicing of single mode or multimode fi bres and 

cross connect while utilising a minimum of space. 

110mm (H) x 295mm (W) x 375mm (L)” 


Designed to connect the incoming network and outgoing building network via optical splitters 

in an in-building or Fibre to the home network. The splitter box is also designed for easy install 

and upgrade to be compatible with range of fi bre counts, pigtails, tube sizes, splitters and 

connector types available. In addition the splitter box provides protection for cables, splices, 

connectors and passive optical splitters in an in-building environment. 


Designed to connect the incoming network and outgoing in-building network via optical splitters 

in an in-building or Fibre-to-the-home (FttH) network at the 19” rack in the MDF room. The 

splitter box is also designed for easy install and upgrade to be compatible with range of fi bre 

counts, pigtails, tube sizes, splitters and connector types available. In addition the splitter box 

provides protection for cables, splices, connectors and passive optical splitters in an in-building 

environment. 



ACCESSORIES 


Fibre Patch Panels 

To effectively manage optical fi bre terminations and splices, this product is custom made for 

Emtelle blown fi bre solutions and provides a termination solution for both tube and fi bre with 

lockable mechanism. The panels are designed for standard 19” and 23” with changeable side 

hanger. These slide out units are equipped with fi bre splice trays and fi bre guide accessories to 

limit bend radius and provide strain relief control. Fibre assemblies (pigtails, adaptors, splice 

protectors can be pre-fi tted if required to suit customer requirements. 

Description Product Code 

6 to 24 Ports Fibre Patch Panel 9943 

2RU 48 Port Fibre Patch Panel 70443 



Adaptor Modules 

Singlemode 

Module Type SC/PC SC/APC LC ST/PC FC/PC 

6x Simplex 9952 9953 - 9956 9957 

8x Simplex 70453 70454 - - - 

3x Duplex 9954 9955 - - - 

6x Duplex 70458 70456 70452 - - 

Multimode 

Type SC/PC SC/APC LC ST/PC FC/PC 

6x Simplex 9958 

8x Simplex 70457 

3x Duplex 9959 

6x Duplex - 

Adaptor modules not listed above may be available on request 

24 Ports Tube Patch Panel 

The 24 port tube patch panel is used either in the front or the back of the 19” 

rack for easy management of 5 or 3mm microducts. The panel provides the capacity to accommodate 

up to 24 microducts. 

5mm Product Code 7361 

3mm Product Code 9945 

Tube or Patch Lead Guide 


The tube or patch lead guide is to manage the outgoing or incoming tube e.g. 

from Emtelle 24 port tube patch panel or patch leads from the fi bre patch panel. The guide will 

ensure the minimum bending radius of tube and fi bre are conformed with and incoming and 

outgoing tube/fi bre are well managed. 

Fibre Termination Enclosures 


Kitting ■ 


Aerial ■ 






Note that adaptor modules should be 

ordered separately. See data sheet 

for a list of all included parts. 

Emtelle is able to provide a range of fi bre management and termination products, which can be tailored to individual requirements. 

Please consult your local sales offi ce to discuss your requirements. 



71 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


72 

Connectors 


ACCESSORIES 

Emtelle provides an extensive range of standard and direct buried push-fi t connectors for the system. These connectors are 

provided with outer shells in either acrylate (clear) or polypropylene (solid colour). The different materials provided are to suit customer’s 

preferences or applications. All connectors supplied by Emtelle conform to our specifi cation MHT860. 

Straight connectors 

Locking clips / tools are available. 

Please contact your local Emtelle 

representative for further details. 

Reducers 

End Cap 

Straight connectors are used to join microducts having the same OD and ID. 

Take note of both the outer and inner diameter of the microduct to be connected. eg 8/6 connectors 

are unsuitable for 8/3.5 microduct. Some connectors are available pre-fi tted with clip-on 

protectors to enable direct burial for FTTH drop zones. 

Microduct size (both ends) Product codes Minimum order 

outer diam - mm inner diam - mm 

quantity 

3 

4 

5 

7 

7 

8 

8 

10 

12 

14 

14 

16 

2.1 

3.5 

5.5 

3.5 

6 

3.5 

8 

10 

12 

10 

12 

9916 

9917 

9918 

9919 

70193 

9920 

9772 

9921 

9922 

9821 

9923 

9924 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

These connectors join microducts of different size. Check the microduct OD and ID. 

Microduct A Microduct B Product codes Minimum 

Microduct outer Microduct inner Microduct outer Microduct inner 

diam - mm diam - mm diam - mm diam - mm 

order quantity 

5 

5 

7 

7 

8 

8 

10 

12 

12 

12 

14 

14 

16 

3.5 

2.1 

5.5 

5.5 

3.5 

6 

8 

10 

10 

10 

10 

10 

12 

3 

3 

3 

5 

3 

5 

8 

5 

7 

10 

10 

12 

12 

2.1 

2.1 

2.1 

3.5 

2.1 

3.5 

6 

3.5 

5.5 

8 

8 

10 

10 

9925 

9926 

70407 

70031 

70117 

9927 

9928 

70034 

9929 

9930 

70035 

9931 

70036 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

End caps are used to seal an open tube and prevent dirt or water entry. 

Size Product Code Minimum order quantity 

3mm 9932 1 bag of 10 

4mm 

5mm 

6mm 

7mm 

8mm 

10mm 

12mm 

14mm 

16mm 

9933 

9934 

9975 

9935 

9936 

9937 

9938 

9939 

70153 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

Direct Buried Connectors 

There are situations with drops to a building where a joint is required in a rugged microduct. Since such a joint would be in domestic areas 

rather than industrial sites, a full closure to protect the microduct joint is not always deemed necessary. 

For these joints, we offer rugged connectors, and in two styles: ■ Protected Connector ■ DB (direct buriable) connector 

Protected Connectors 

The protected connector is a standard microduct connector pre-fi tted with a removable outer shell. The product offers enhanced protection over an 

uncovered connector. These covers also fi t over equivalent sized end-caps. 

Product code Microduct size Description Minimum Order Quantity 

70194 

70169 

70262 

70136 

70170 

70171 

70172 

7/3.5mm 

7/5.5mm 

8/3.5mm 

8/6mm 

10/8mm 

12/10mm 

14/10mm 

Protected connector 







1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 

1 bag of 10 



72

Connectors 

Straight connectors 

Microduct 

outer diam - mm 

ACCESSORIES 

ACCESSORIES 

Connector through bore 

diam - mm 

Product codes Minimum order quantity 

Solid colour clear 

3 2.1 7312 1 bag of 10 

4 2.8 71070 1 bag of 10 

5 3.5 7223 1 bag of 10 

6 4.8 7310 1 bag of 10 

6.3 5 7930 1 bag of 10 

8 6 7222 1 bag of 10 

10 7.6 7226 1 bag of 10 

12 10 7263 9732 1 bag of 10 

16 14 71424 1 bag of 10 

18 16 70956 1 bag of 10 

Direct Bury Straight connectors 

Microduct size (both ends) Product codes Minimum order quantity 

outer diam - mm inner diam - mm Solid colour clear 

Reducers 

Microduct 


End Cap 

7 3.5 71108 1 bag of 10 

7 4.0 71190 1 bag of 10 

14 10 71105 1 bag of 10 

Connector 

inner diam - mm 

Microduct 


Connector 

inner diam - mm 

Product codes Minimum order 

quantity 


4 2.2 3 2.2 70728 1 bag of 10 

5 2.2 3 2.2 9638 1 bag of 10 

6 2.2 3 2.2 70727 1 bag of 10 

(¼”)6.3 3.5 5 3.0 9502 1 bag of 10 

8 6 5 3.5 6085 1 bag of 10 

10 6.3 8 6.3 7280 1 bag of 10 

12 8 10 8 7279 1 bag of 10 

Direct Bury End Cap 




Kitting ■ 


Aerial ■ 






3mm 9610 1 bag of 10 

4mm 70762 1 bag of 100 

5mm 7221 1 bag of 10 

6mm 7311 1 bag of 10 

10mm 9611 7486 1 bag of 10 

12mm 9612 1 bag of 10 

16mm 71438 1 bag of 10 


7mm 71109 1 bag of 10 

14mm 71106 1 bag of 10 



73 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


74 

Connectors 

Closedown 

Gas Block Connectors 

Water-blocking Connector 

3mm 7314 

5mm 6089 


ACCESSORIES 

This connector is to protect fi bre where a centre blow has taken place. The closedown covers 

the fi bre and both ends of the break in the microduct. 

An active gas block (GB) connector has an internal seal that can be ‘open’ to permit blowing 

through, or ‘closed’ so the seal contacts the fi bre and prevents the fl ow of gas. 

Microduct size 

mm 


3mm 7316 1 bag of 10 

5mm 7249 1 bag of 10 

8mm 7331 1 bag of 10 

Description Product Code Fibre cable size 

range 

Approx mm 

Gas block 

seal colour 

3mm 3GB long 70730 0.9-1.2 

3mm 3GB short 70731 0.9-1.2 

4mm 4GB 70729 0.9-1.2 

5mm 5GB 6091 FU 

6mm 6GB 71220 FU 

6-3mm reducer 6-3GB 71355 FU 

6-4mm reducer 6-4GB 70875 FU 

7mm 7GB 1.0-1.6 71110 FU 

7mm 7GB 1.8-2.4 71533 Red 

7mm 7GB 2.5-3.0 71116 2.5-3.0 Blue 

8mm 8GB 6086 FU 

8-5mm 8-5GB 6087 FU 

10mm 10GB 5.5-6.6 71496 5.5-6.6 Green 

10mm 10GB 6.5-7.2 71497 6.5-7.2 Red 

12mm 12GB 5.5-6.6 71498 5.5-6.6 Green 

12mm 12GB 6.5-7.2 71499 6.5-7.2 Red 

12mm 12GB 7.2 - 8.2 71534 7.2-8.2 Blue 

14mm 14GB 6.5-7.2 71107 6.5-7.2 Red 

14mm 14GB 7.6-8.2 71535 7.6-8.2 Blue 

These connectors are used at the end of a fi bre unit (fu) length, usually inside the building, to 

prevent water from travelling along the tube and into the building. 

The passive water blocking types have a fi xed aperture size in the seal, the fi bre unit being 

pushed through by hand after blowing is complete. For these it is best to select an item with a 

suitably sized seal, to give a snug fi t. 

We quote the size range of fi bre unit or cable that each water blocking connector can accept 

and properly seal onto. 

Tube size one end Tube size other end Capacity fu or 

fc diam 

Product code 

3mm 3mm FU 7314 

5mm 5mm push-on FU 6089 

6mm 3mm FU 71441 



Connectors 

ACCESSORIES 

Duct Sealing 

Divisible duct sealing sets developed to provide an effective and simple solution to all gas and 

watertight duct sealing requirements. The modular system enables installation in new and existing 

situations. Set contains 2 plastic click shells, plastic cutting block, synthetic rubber plug. 

Product code Duct size O/D 

(mm) 

Cable 

Diameter (mm) 

Size A Size B Minimum 

Order Quantity 

71161 10 3.9-2.5 32 25 25 

71162 10 5.0-3.9 32 25 25 

71163 10 6.5-5.0 32 25 25 

71164 10 8.0-6.5 32 25 25 

71165 12 3.9-2.5 32 25 25 

71166 12 5.0-3.9 32 25 25 

71167 12 6.5-5.0 32 25 25 

71168 12 8.0-6.5 32 25 25 

71169 14 8.0-5.8 34 29 25 

71170 14 10.0-8.0 34 29 25 

71171 16 8.0-5.8 34 29 25 

71172 16 10.0-8.0 34 29 25 

71173 18 12.0-9.4 36 34 25 

71174 20 12.0-9.4 36 34 25 

Duct Seal 

Divisible duct sealing sets for HDPE ducts have been developed to provide an effective and 

simple solution to all gas and watertight duct sealing requirements. 

Product code Duct size OD Confi guration 

71176 duct seal 32mm 1x12+1x10+1x7.5 

71177 duct seal 32mm 3x10 






71182 duct seal 40mm 2x15, 2x8.4-13.4 

71183 duct seal 50mm 1x15,5+3x12 



71187 duct seal 50mm 10x7+1x12 


71189 duct seal 63mm 24x7+1x14 

Other sizes are available. Contact your local Emtelle representative for further information. 


Kitting ■ 


Aerial ■ 








75 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


76 

Sub-duct Accessories 

End stop connector 

Screw Connectors 

End stop connectors are used to seal an open tube. 


ACCESSORIES 

Size Product Code Quantity per Pack 

16 072770 016 10 

20 072770 020 10 

25 072770 025 10 

32 072770 032 10 

40 072770 040 10 

50 072770 050 10 

63 072770 063 10 

75 072770 075 10 

90 072770 090 10 

110 072770 110 10 

A range of threaded connectors for connecting two pieces of HDPE duct. Both ends are threaded 

to within 5mm of the centre point. The two threads are asymmetrical, to aid duct grip in use. 

The threads at each end are opposite handed so a single turning action screws onto both ducts 

at one time. The threads are slightly tapered to accommodate duct diameters across the OD 

tolerance range. Connectors are marked with tightening directional arrow and duct OD size. 

Product code Duct Size Body OD Body Length Quantity per Pack 

5037 21mm 26mm 90mm 10 

4448 25mm 30mm 90mm 10 

4489 28mm 33mm 90mm 10 

3771C 31mm 36mm 90mm 10 

3650M 32mm 37mm 90mm 10 

3900 34mm 39mm 90mm 10 

4232 35mm 40mm 90mm 10 

4067 37mm 42mm 90mm 10 

4424 40mm 45mm 90mm 10 

5412 44mm 49mm 90mm 10 

9317 48mm 58mm 90mm 10 

9318 50mm 61mm 90mm 10 



ACCESSORIES 


Straight Compression Connectors 

Compression connectors are designed to provide a suitable joint and seal between lengths of 

polyethylene duct of equal diameter, for blowing purposes. (Reusable) 

Product code Duct Size Nut OD Fitting Length Quantity per Pack 

7891 16mm 39mm 105mm 10 

4859 20mm 48mm 121mm 10 

4286 25mm 54mm 125mm 10 

3917P 32mm 64mm 145mm 10 

4390 35mm 64mm 145mm 10 

7895 40mm 82mm 177mm 10 

4065 50mm 96mm 201mm 10 

5361 63mm 113mm 230mm 10 

Compression Connector 

A transparent screw connector used for joining cable ducts of equal diameter. (Reusable) 

Product Code Description Quantity per Pack 

073600 316 16 mm transparent screw connector 10 







Push Fit Connector 

A straight connector used for joining cable ducts of equal diameter. 

Product Code Description Quantity per Pack 

073600 132 32 mm Hawle straight connector 10 



Reducers 

Product Code Size Quantity per Pack 

7897 16 – 20mm 10 

7898 16 – 25mm 10 

7899 20 – 25mm 10 

7900 20 – 32mm 10 

7901 25 – 32mm 10 

7902 25 – 40mm 10 

7904 25 – 50mm 10 

7907 25 – 63mm 10 

7903 32 - 40mm 10 

7905 32 – 50mm 10 

7908 32 – 63mm 10 

7906 40 – 50mm 10 

7909 40 – 63mm 10 

7910 50 – 63mm 10 


Kitting ■ 


Aerial ■ 








77 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


78 


Expanding Duct Plugs 

The Duct plug 1.5 bar can be used to seal an open tube, and can also be used to pull a duct. 

To keep main duct free of water, dirt and grit between duct-laying and sub-duct/cable placement. 

A rope eye at the spigot end of the plug keeps ropes secure and reduces box congestion. 

■ All plastic construction ■ Easy installation and removal 

■ Corrosion proof ■ Reusable 

■ Water-tight 

Product Code Duct ID Range** Quantity per Pack 

4410A 24-30 12 

4410D 29-38 12 

072698 032 32 10 

072698 040 40 10 

072698 050 50 10 

4410C 76-88 12 

4410B 87-102 12 

4410 100-110 8 

9351 148-162 8 

**Addition sizes are available on request. 

Additional Products are available including: Triplex Sub-duct Organiser Plugs 

Quadplex Sub-duct Organiser Plugs 

Electronic Marker 

The Electronic Marker (search ball) provides a method to electronically mark and locate 

underground facilities. 

Product code Item name 

19998 40 Search ball, orange, 101.4 kHz 

70336 Search ball, red, 169.8 kHz 

Other colours and frequencies are available, for further information contact your local Emtelle representative. 


ACCESSORIES 



INSTALLATION EQUIPMENT 





79 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


80 

Blowing Equipment 

Emtelle has selected a range of tried and tested blowing equipment to provide 

maximum blowing distances. 

Fibre Unit 

Blowing Unit 2A 

Fibre Unit Blowing Equipment Ancillaries 

8/12 Fibre Blowing Pack 

Tyres 

8 Fibre Blowing Pack 


When used in conjunction with the 7779 

Blowing Unit this pack contains the necessary 

parts to install Emtelle’s 8 fi bre unit. 

Contents: 1 set of fi bre plates 

1 Brass Wheel 

1 White Tyre 

1 Allen Key (2.5mm) 

A selection of tyres for use with the Blowing Unit. 


Fibre Product codes 

7779 9226 9471 9980 70521 70899 7409A 

2-12 

Micro and Mini cable* 

Page 80 86 86 88 88 89 90 

Ancillaries - Page 81-83 87 87 - 88 89 90 

Spare Parts - Page 84-85 87 87 - - 91 

Blowing Equipment 

Ancillaries - Page 

92 

For further information on mini cable installation contact your local Emtelle representative. 

Product Code 7779 (55m/min) 

The blowing unit has an internal buckle detector to guarantee fi bre integrity at all times during 

the fi bre installation. The blowing head comes complete with a set of standard 4 fi bre plates 

which can be interchanged as required with 8 and 12 fi bre plates from our fi bre 

product range. 


12 Fibre Blowing Pack 


When used in conjunction with the 7779 

Blowing Unit this pack contains the necessary 

parts to install Emtelle’s 12 fi bre unit. 

Contents: 1 set of fi bre plates 

1 Brass Wheel 

1 White Tyre 

1 Allen Key (2.5mm) 

Product Code Description Unit of Issue 

7032 Smooth Green Tyres per pair 

7010 Grooved Green Tyres per pair 

7576 White Tyres 1 





Fibre Plates 

These plates are installed into the blowing head of the Blowing Unit 2A when installing 

Emtelle’s range of fi bres. There are different plates for each fi bre size (Head Seal not shown). 

Dispenser 


7584 2/4 Fibre Plates per set 

7007 8 Fibre Plates per set 

7481 12 Fibre Plates per set 


The 2A Blowing Head is secured to the Dispenser to enable safe installation of the fi bre into the 

microduct. The dispenser can handle up to 15 Bar air pressure. 

Flowmeter kit 


This kit consists of an air fl ow meter for measuring the air fl ow, some connectors for connecting 

the compressor hose directly to the microduct, and air exhausts for stopping any 

foreign objects escaping from the other end of the microduct. 

Pan Guide 


The Pan Guide is used to guide the Fibre from the pan to the blowing head. 

Pan Guide 1A 


The Pan Guide is used to guide the Fibre from the pan to the blowing head. This pan guide can 

also be used along with the coiler. 




81 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


82 


Pan Guide Support 

Pan Inversion Ring 

Pan Inversion Clamp Ring 

Power Supply for Blowing Unit 



The Pan Guide Support is used to raise the pan guide away from the actual pan of fi bre which is 

necessary while coiling fi bre back into the pan. 


The Pan Inversion Ring is used in conjunction with the Pan Inversion Clamp Ring when transferring 

fi bre from one pan to another during a center blow operation. 


The Fibre Pan Inversion Clamp Ring is a simple-to-use device for transferring fi bre from one 

fi bre pan to another. 


A re-chargeable 24v transportable power supply for use with Blowing Unit 2A. Requires a 240v 

supply during charging. 


240-110v Transformer 






Coiler 1A 


The Coiler 1A winds the fi bre into a fi bre pan. It is used for onward coiling during range extending. 

The unit consists of a coiling head, a control unit and a drive unit. It can coil 2, 4, 8 and 12 

fi bre. It operates from a 110V ac or a 24V dc supply. 

Coiler spare parts and Accessories 

4 fu wheels 


This is a replacement wheel for the coiler that will allow coiling of 2 or 4 fi bre unit. 

8 & 12 fu wheels 


This is a replacement wheel for the coiler that will allow coiling of 8 or 12 fi bre unit. 

Roller Chain Assembly 


The Roller Chain Assembly is part of the Coiler 1A unit. It can be replaced should wear occur on 

the roller tyres. 

Coiler Fibre Guide 


The Coiler Fibre Guide has been designed to allow fi bre units to be coiled into the fi bre pan 

without the risk of the fi bres catching on the inside edge of the fi bre pan 

Coiler Extension 


In some fi bre network solutions, fi bre may have to be deployed over long distances. To be able 

to do this, fi bre is blown from one point and recoiled into another fi bre pan at the next point. 

This operation is repeated until all the fi bre has been deployed. For these long distances (up to 

6km), Emtelle has developed a deeper fi bre pan to take these longer lengths of fi bre. To keep 

additional equipment investments low for our installers, Emtelle has also developed this simple, 

easy-to-use coiler head extension to enable standard equipment to be used when coiling fi bre 

into the new deep fi bre pan. 




83 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions

Air Blown Fibre FttX FttX Customers CustomersFibre Products Fibre Products Tube Bundle Tube Bundle Sub-Duct Accessories Accessories Installation Installation Equipment Equipment Tools Tools Training Training Emtelle Emtelle Offi Offi ces ces Terms & & Conditions 

Fibre Unit Blowing Equipment Spare Parts 

Head Seal 

Glass Lens/Slips 

Spares Kit 

Remote Control Unit 


This seal is used to seal the top fi bre plate to prevent air leakage during blowing. 

Product Code Unit of Issue 

7033 per metre 


Spare Lens/Slips that are located in the Blowing Head. 


This small pack should contain enough consumables for three years’ normal use. 

Contents: Feed Wheel tyre; Glass slips; Silicon Seal (1.5m); Allen Key 3mm AF; Fuse, 

anti surge 1.6A x 20; Fuse, anti surge 500mA x 5mm 


The remote control allows the fi bre installation to be performed away from the Blowing Head. 

This is very useful where space is restricted at the installation site. 

84 I N N O V A T I O N A N D F L E DESIGNED X I B I L FOR I T Y YFLEXIBILITY 




Fibre Unit Blowing Equipment Spare Parts 

Power lead 24 volt DC 


This lead connects between the 24 V dc output on the Compressor and powers the Blowing Unit 

2 A. This is an alternative supply to the Blowing Unit. 

Power lead 110 volt AC 


110 V ac power lead used to power the Blowing Unit 2A from either a 110V ac transformer or 

generator. 

Lead 


This Lead connects between the Blowing Head and the Blowing Unit 2A. 




85 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


86 

Fibre Unit and Mini Cable Equipment 

FUSION 

Blowing Unit EM-25 

INSTALLATION INSTALLATION EQUIPMENT 

EQUIPMENT 

Product Code 9471 (Base Unit) 

The FUSION, can blow fi bre counts of 1-96, something that in the past would 

have required two machines – one for 1-12 fi bres and one for 24-96. Compatible with a 

wide range of mini cables, the new machine offers new levels of effi ciency, fl exibility and convenience, 

while lowering investment. 

Designed to install Emtelles fi bre units 2, 4, 8 & 12 and mini cable 24 to 96 fi bres with 

dimensions ranging from 1-8mm. 

Fitted with a radial force setting device, a blocking device and an electronic speed and 

distance counter VL10. 

Product Code 9472 (Complete Parts Kit) 

All the parts necessary to install Emtelle’s complete range of fi bre units and mini cable. The 

complete range includes Emtelle’s fi bre units 2, 4, 8 & 12 and mini cable 24 to 96 fi bres with 

dimensions ranging from 1-8 mm. 


Capable of blowing fi bre products up to 3mm outside diameter. It has a maximum inlet 

pressure of 16 bar. The EM-25 is run from a 24V dc supply. The EM-25 can blow into 

a microduct with a maximum diameter of 8mm. The EM-25 has an extensive range 

of microduct and cable inserts that will need to be ordered at the same time as the 

machine. 

For ancillary equipment refer to page 92. 




Cable Insert 


EQUIPMENT 

9227A Cable insert 1-3 For fi bre units 1-3mm Em-25 & Fusion Only 

9311 Cable Insert 4-8 for cables 4-8mm Fusion Only 

Lip/Cable Seals 

9227B Lip Seals 1.2/7 For fi bre units 1.1-1.4mm Em-25 & Fusion Only 

9227C Lip Seals 2/7 For fi bre units 1.4-2.3mm Em-25 & Fusion Only 

9227D Lip Seals 0.9/7 For fi bre units 0.8-1.1mm Em-25 & Fusion Only 

9221A Cable Seals for cables 3.4-4.3mm Fusion Only 

9221B Cable Seals for cables 4.4-5.3mm Fusion Only 

9221C Cable Seals for cables 5.4-6.3mm Fusion Only 

9221D Cable Seals for cables 6.4-7.3mm Fusion Only 

9221E Cable Seals for cables 7.4-8mm Fusion Only 

DUCT INSERTS 

9228A Duct Insert OD 3mm, fi bre units up to 1.8mm Em-25 & Fusion Only 

9228B Duct Insert OD 4mm, fi bre units up to 2.8mm Em-25 & Fusion Only 

9228C Duct Insert OD 5mm, fi bre units up to 1.8mm Em-25 & Fusion Only 

9228D Duct Insert OD 5mm, fi bre units up to 2.8mm Em-25 & Fusion Only 

9228E Duct Insert OD 6mm, fi bre units up to 3mm Em-25 & Fusion Only 

9228F Duct Insert OD 7mm, fi bre units up to 1.8mm Em-25 & Fusion Only 

9228G Duct Insert OD 8mm, fi bre units up to 2.8mm Em-25 & Fusion Only 

9228H Duct Insert OD 8mm, fi bre units up to 3mm Fusion Only 

9222A Duct Insert OD 7mm, cables up to 4.8mm Fusion Only 

9222B Duct Insert OD 8mm, cables up to 3.8mm Fusion Only 

9222C Duct Insert OD 8mm, cables up to 5.6mm Fusion Only 

9222D Duct Insert OD 10mm, cables up to 7.5mm Fusion Only 

9222E Duct Insert OD 12mm, cables up to 8.0mm Fusion Only 

Steel Tyres 

9223A Steel Tyre, U-groove for cables 3.1mm-3.5mm Fusion Only 

9223B Steel Tyre, U-groove for cables 3.6-4mm Fusion Only 

9223C Steel Tyre, U-groove for cables 4.1mm-4.5mm Fusion Only 

9223D Steel Tyre, U-groove for cables 4.6mm-5mm Fusion Only 

9223E Steel Tyre, U-groove for cables 5.1mm-5.5mm Fusion Only 

9223F Steel Tyre, U-groove for cables 5.6mm-6mm Fusion Only 

9223G Steel Tyre, U-groove for cables 6.1mm-6.5mm Fusion Only 

9223H Steel Tyre, U-groove for cables 6.6mm-7mm Fusion Only 

9223J Steel Tyre, U-groove for cables 7.1mm-7.5mm Fusion Only 

Consumables 

Additional packs of O-Rings 

9321A O Rings for OD 3mm 

9321B O Rings for OD 4mm 

9321C O Rings for OD 5mm 

9321D O Rings for OD 7mm 

9321E O Rings for OD 8mm 

9321F O Rings for OD 10mm 

9321G O Rings for OD 12mm 


For the EM-25 order 9227A 

plus one item from the 

next 2 tables depending on 

fi bre/microduct size 

For the Fusion order 9311 

plus one item from the next 

3 tables depending on 

fi bre / microduct size 



87 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


88 

Mini Cable Blowing Equipment 

UltimazV20 

MiniJet 


The MiniJet is suitable for installing microcables 

ranging from 4 – 16mm diameter. 

Order the Minijet and 1 item from 

each of the tables 



The Ultimaz is designed for use in the system. It is suitable for installing fibre units / 

microcables ranging from 0.8 - 4mm diameter. 

It is equipped with an adjustable torque limiter and a limiter locking device enabling high pushing forces. 

The Ultimaz is powered by a standard electrical / battery powered drill (not supplied). The drill 

must have an output torque exceeding 0.3Nm at 250 – 500 RPM. 

A full range of accessories / spare parts are available. Please contact your local Emtelle 

representative for further details. 

CABLE INSERT 


70536 Mini-Jet P400 - Cable insert 4-5 



70539 

LIP SEALS 

Mini-Jet P400 - Cable insert 13-16 


70540 Mini-Jet P400 - set of 6 lip seals 3.4 to 4.3mm 








70548 

DUCT INSERTS 

Mini-Jet P400 - set of 6 lip seals 12.5 to 14.7mm 


71460 Mini-Jet P400 - Duct inserts OD - 7mm 













OPTIONAL / SPARE PARTS 


71463 Mini-Jet P400 - set of 6 O-rings for duct OD - 7mm 











70566 Mini-Jet P400 - set of 10 cable caps for cables - 4mm 





70571 Mini-Jet P400 - Belt for MiniJet V 

70572 Mini-Jet P400 - Belt for MiniJet Flat 

70573 Mini-Jet P400 - Bundle Jetting kit MD 2x10mm 

70574 Mini-Jet P400 - Jetting Lube - 12x95cl 

70575* Mini-Jet P400 - Microjetting Lube - 24x240ml 

*Refer to page 104 






Airstream 


The Airstream is suitable for installing micro/mini cables ranging from 2.5 – 11.0 mm. The 

machine features a high or low adjustable torque setting to protect the cables. This also 

aids in the installation of small cables. 

TUBE COLLET ASSEMBLY 


70900 Outer Diameter Tube 5mm 








CABLE GUIDE 


70904 Cable Guide 2.5 mm 

70905 Cable Guide 2.6 - 3.5mm 

70906 Cable Guide 3.0 - 6.4mm 

70907 Cable Guide 6.0 - 11 mm 

CABLE COLLET ASSEMBLY 


9026A Cable Size 2.5 - 3.0 mm 

9026B Cable Size 3.0 - 3.8 mm 

9026C Cable Size 3.8 - 5.0 mm 

9026D Cable Size 5.0 - 6.4 mm 

9026E Cable Size 6.4 - 8.0 mm 

70908 Cable Size 8.0 - 9.5mm 

71458 Cable Size 9.5 - 11.0mm 

OPTIONAL / SPARE PARTS 

CABLE SEAL (PACKS OF 5) DRIVE BELTS 


9028A Cable Size 2.5 - 3.0 mm 

9028B Cable Size 3.0 - 3.8 mm 

9028C Cable Size 3.8 - 5.0 mm 

9028D Cable Size 5.0 - 6.4 mm 

9028E Cable Size 6.4 - 8.0 mm 

70911 Cable Size 8.0 - 9.5 mm 

71459 Cable Size 9.5 - 11.0mm 

TUBE SEAL (PACKS OF 5) 










Order the Airstream and 1 item from each of the tables 

on the left to make a complete machine. 

Example Order 

1 x 70899 (Airstream) 

1 x 70901 (Tube Collet Assembly OD 14mm) 

1 x 70907 (Cable Guide 6.0 - 11mm) 

1 x 9026E (Cable Collet Assembly for cable 6.4 - 8.0mm) 

This setup will be for mini cable blowing into a 14mm outer 

diameter Microduct 

CORD SEAL 

LUBRICANT 


70909 2.5 - 5mm Cable Diameter 

70910 3 - 11 mm Cable Diameter 


9051 Seal Cord 2mm diameter x 

1 metre long 


70848 Cable blowing lubricant 5L 




89 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


90 


Breeze 

Product Code 7409A - 110V 

The Breeze Cable Blowing Machine has been designed for the installation of micro cables. 

Small and portable with ergonomic controls, it can be used for external or internal use. 

The compliant double-driven cable rollers provide secure grip while safely handling the 

cable. The pushing force can be limited to suit the cable stiffness, and the speed control 

is fully adjustable between zero and maximum. There is a read-out to monitor the cable 

speed and distance. The machine is retained in a light-weight, robust aluminium housing. 

Features 

capable of blowing fi bre products in the 2.5mm to 8.0mm range 

maximum inlet pressure of 15 bar 

supply is 110V ac 

can blow into a microduct with a maximum dia meter of 12mm 

a mechanical buckle detector is incorporated into the device 

the breeze comes with one set of cable inserts and one set of microduct inserts 

TUBE COLLET ASSEMBLY 


9024A Outer Diameter Tube 7mm 

9024B Outer Diameter Tube 8mm 

9024C Outer Diameter Tube 10mm 

9024D Outer Diameter Tube 12mm 

9024E Outer Diameter Tube 14mm 

9024F Outer Diameter Tube 16mm 

CABLE GUIDE 


9025A Cable Guide 2.5 – 3.8mm 

9025B Cable Guide 3.8 – 8.0mm 

CABLE COLLET ASSEMBLY 


9026A Cable Size 2.5 – 3.0mm 

9026B Cable Size 3.0 – 3.8mm 

9026C Cable Size 3.8 – 5.0mm 

9026D Cable Size 5.0 – 6.4mm 

9026E Cable Size 6.4 – 8.0mm 


Order the Breeze and 1 item from each of the tables on the 

left to make a complete machine. 

Example Order 

1x 7409A (Breeze - 110v), 

1x 9024C (Tube Collet Assembly OD 10mm), 

1x 9025B (Cable Guide 3.8-8.0mm), 

1x 9026D (Cable Collet Assembly for cable 5.0-6.4mm) 

This setup will be for mini cable blowing into a 10 outer 

diameter Microduct. 




Breeze Spare Cable Seals 

Breeze Microduct Seal 

Breeze Unit Drive Wheels Red 

Breeze Unit Drive Wheels Black 

Breeze 1 metre sealing cord 



9028A Cable Seals for Cables 2.5 – 3.0mm 

9028B Cable Seals for Cables 3.0 – 3.8mm 

9028C Cable Seals for Cables 3.8 – 5.0mm 

9028D Cable Seals for Cables 5.0 – 6.4mm 

9028E Cable Seals for Cables 6.4 – 8.0mm 


70913 Breeze Microduct Seals 7mm 







Replacement Wheels for the Breeze Machine. 


Replacement Wheels for the Breeze Machine. 

These wheels are manufactured from a softer material and designed for a more enhanced grip. 


Replacement sealing and glue for use inside the Breeze machine. 




91 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


92 

Mini Cable Blowing Equipment Ancillaries 

Mini Cable Fleeting Device 

Blowing Equipment Ancillaries 

Compressor 

10 bar petrol driven 

10 bar electric driven 

Replacement Air Hose 

15 bar Air Preparation Kit 


EQUIPMENT 


Used for mid blow operations when installing Mini cable. The Fleeter will hold up to 2 km of 

Mini cable. 

The compressors have been tried and tested by Emtelle and come fi tted with all the necessary 

air conditioning components to enable the correct air quality to be achieved for installations into 

the network. 

The compressors can be petrol or electrically driven, delivering air up to 10 bar to the Blowing 

Head. 


7028 10 bar Petrol Compressor With 24 Volt output 

7029* 10 bar Electric Comp 110v With 24 Volt output (UK Yellow Industrial Plug) 

7757* 10 bar Electric Comp 240v With 24 Volt output (UK Plug) 

7757EU* 10 bar Electric Comp 240v With 24 Volt output (European Plug) 

*Please note electric compressors are for indoor use only 


This replacement hose is 10m in length and is used to supply air from the compressor to the 

blowing unit. 


The Air Preparation Kit contains the correct fi lters etc to deliver good quality air for 

the blowing process. This allows the use of standard ‘off the shelf’ compressors in 

networks. Designed to be used in line with air coming in from the compressor and air going out 

to the dispenser. Maximum airfl ow 1000 ltr/min. 




TOOLS AND CONSUMABLES 

TOOLS AND 

CONSUMABLES 




93 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


94 

Tools 

Pliers Square Nose 

1. Code 9087 Toolbox 

2. Code 9728 Sheath Stripper 4.5-40mm 

3. Code 7794 Metal free cutter for 1DB 

4. Code 9344 Diagonal Cutters 

5. Code 7301 Pliers Square nose 

6. Code 7069 Trimming Knife 

7. Code 7001 Longitudinal Sheath Stripper 

8. Code 7071 Rotational Sheath Stripper 

9. Code 7039 Scissors 


Small combination pliers with cutter. 


For best possible performance, it is critical the correct tools are used. Emtelle have identifi ed and tested a range of tools that are likely to 

be required when installing . 

Tool Kit 

Sheath Stripper 4.5-40mm 

Metal Free Cutter for 1DB 

Diagonal Cutter 


The Emtelle toolkit comes with the following tools. 


This is capable of making circumferential cuts on cable and . The tool is plastic 

bodied with a spring loaded “V” anvil to attach it to the cable. The cutting blade is adjustable 

for depth with a capacity of 4.5-40mm. 

Spare Blade 

Product Code 9728 B 

1 per bag 


The cutter has been specially designed to remove the outer Jacket from a 1 way DB 5mm tube 

assembly. 


Provides clean cutting of metal products, Direct Bury sheaths and fi llers. 


10. Code 7299 Microduct Rotational Cutter 

11. Code 9346 42mm Heavy Duty Cutter 

13. Code 9345 Screwdriver Pack 

13. Code 7298 Junior Hacksaw 

14. Code 7300 Brush Sash Tool 6A 

15. Code 7949 Microduct Rounding Tool 

16. Code 7236 Collet Locking Tool 

17. Code 7014 Primary Tube Cutter 12.7mm 



Tools 

Trimming Knife 



An ergonomically designed handle allows safer operation of this general-purpose knife. (Knife 

holder not included) 

Dismantling Knife 


Fixed, curved stainless steel blade with guide shoe & slip guard handle. Suited to dismantling DB 

tube assemblies. Supplied with protective blade cap. 

Longitudinal Sheath Stripper 


This tool can be used to strip the sheath from around the microduct without 

damaging it. The unwanted tube that surrounds the fi bre can be stripped off with ease. 

Product Code 7001B 

Replacement blades 

Cable Cutting Tool 

Product Code 072699 100 

Cable Cutting Tool 


Replacement blades 

Rotational Sheath Stripper 


This is used for cutting round sheathed product rotationally, for gaining access to the primary 

tubes underneath the sheathed product. 

This is suitable for entering the Direct Buried (DB) product from 12mm - 44mm. 

Duct clipper 


Dimensions: 6-67mm 



This is used for cutting round sheathed product rotationally, for gaining access to the primary 

tubes underneath the sheathed product. 




95 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


96 

Tools 

Heavy-Duty Scissors 

Screwdriver Pack 

Junior Hacksaw 

Brush Sash Tool 6A 

Microduct Rotational Cutter 

Microduct Rounding Tool (x4) 

Collet Locking Tool 



These scissors can be used for many things when working with . They are heavy-duty 

and can cut through foil, sheath, rope, etc. 


This hand-held stripping tool is for stripping cable jackets, cable sub assemblies and microduct 

both longitudinally and circumferentially. There are three adjustable blades on different faces 

to facilitate different cutting operations and depths of 3.2mm to 5.5mm. 


A 6 piece screwdriver set used for general engineering work, maintenance, instrument and 

terminal assemblies etc. 

Contains: 

Pozi 1 & 2 

Slotted 2.5, 4, 5.5 & 6.5 


Junior Hacksaw extremely useful when cutting sub duct and tube bundle. 


A useful brush for the removal of dust and dirt from inside the blowing head or the mating 

surfaces of a closure. 


This simple tool allows you to round any microducts (3mm, 5mm and 10mm OD) after cutting 

and before adding a connector. 


This tool ensures that the microduct is correctly locked into the connector. 




Tools 

Duct cutter 

42 mm Heavy-Duty Cutters 

Thick Wall Microduct Cutter 



For cutting and preparing Thick Wall Microduct. 

6mm-25mm Capacity. 


Spare blade 

Plastic shears 

Primary Tube Cutter 

This tool gives a clean, straight cut to the microduct before inserting into a connector. 


Maximum cutting diameter is 12.7mm. 






Product Code 9346 (included in Tool kit) 

For easy cutting of all products, 

especially the DB type. 

Cutting range is from 10 - 42mm outer diameter. 


Dimensions: 26mm 






Spare blade 




9346 

7068 

97 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


98 

Tools 

Profi le Stripper 

Fibre Stripper 

Stripper Fibre 10A 

Jacket Stripping Tool 

TOOLS 







A tool to remove the outer jacket and aid the breakout of individual fi bres from the Emtelle 2 or 

4 fi bre unit. 


A precision tool used to remove the primary coating from fi bres. 


Used in the removal of outer sheaths of Emtelle fi bre units and used in the crimping of blowing 

beads (codes 7318A & 7512A) 




Tools 

Microcable FU Stripper 


Product Codes 9719A, 9719B, 9719C 

Designed for removing optical fi bre cable jackets up to 3mm diameter and 900um buffer. 

Features 

■ Guide bushes position fi bre between two opposing blades 

■ Range of bushes supplied to suit various diameters 

■ Cutting depth of blades adjustable to suit jacket 

■ Includes case, bushes and spare blades 

Use with Emtelle Microcable FU 

2f and 4f: Blue bushes 

8f and 12f: White bushes 


9719A 


Includes case, bushes and spare blades 

9719B 

Microcable FU Bushes 

Set of spare guide bushes 

9719C 

Microcable FU Blades 

Spare blades (pair) 

Longitudinal Microduct Stripper 


This is used on products where a rip cord is not available. It will cut along 3mm thick sheaths and 

through glass reinforcement. There are three different spacers for cutting through different sizes 

of sheath. 

Hand Bevel Tool 

Product code 072681 030 

Plastic bevel tool 






99 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


100 

Tools 

Aluminium Bevel Tool 

Steel bevel tool 

Wrench for 40mm and 50mm 

Chain cutter for multi duct 






Extra Chain 


Note 

The make-up colour of some tools may differ slightly, however this will not affect the tool functionality. 

Trolley for Coils 




Product Code Dimensions mm 

72600 025 25 

72600 032 32 

72680 040 40 

72680 050 50 

72680 063 63 

Product Code 9341C 

For easy deployment of 1DB to the premises. A 500m coil can be quickly mounted on the trolley 

between metal fl anges. When the coil is fi nished there is no drum to dispose of. 




Consumables 

Swivels and Fuses 


These are used for installation of Tube Bundle into pre-roped duct. They should be 

connected between the cable pulling sock and the draw rope. The swivel stops the rope twisting 

during installation and the fuse stops the cable being over-tensioned. Any cables which require 

an installation force of 1kN or less should be installed by hand. 


7084 Connector Swivel each 

7085 Shear Pin 2kN 10 


7087 Shear Pin 4.5kN 10 

71122 Fused Swivel 22mm each 

Wrench Cable Pull for Sock 40 and 50mm 

These are used to install any size of sheathed products by pulling. An expandable 

woven steel sleeve that grips lightly onto cables as pulling tension is applied. 


7081 6-10mm 

71128 10-13mm 

7082 10-20mm 

71127 13-16mm 

7083 20-30mm 

Blowing Beads 

These beads are fi xed to the end of the fi bre before blowing starts. It guides the fi bre through 

connectors and around sharp bends. 


7318A 2/4 Fibre 25 

7512A 8/12 Fibre 25 

Cleaning Sponge 

Other sizes may be available on request. Used to remove and clean foreign objects out of the 

Microduct. Sizes listed are internal diameter. 


7063 Sponge 3.5mm 

7063A Sponge 5mm 

7063B Sponge 8mm 

7063C Sponge 10mm 

7063D Sponge 12mm 

71303 Sponge 14mm 

Resin Pack 

Resin Pack 9B – Product Code 7077 

The resin pack is used to fi ll the interstices of the Tube Bundles to stop water and 

gas migration. This is normally used at entry points to buildings. The small container is added to 

the large container to obtain the correct mix. Assembly sealant is used to seal the cable so the 

resin does not pour all the way down the assembly. 

Resin Pack 10B – Product Code 70688 

Resin Pack 10B is a two component polyurea compound specifi cally formulated for use as a self 

curing closure sealant system for sealing polyethylene sheathed telecommunications cables into 

the bases of dome closures. This product is supplied in a two component cartridge containing 

both base material and hardener. Mixing is achieved using the static mixer nozzle supplied in the 

kit. Supplied with 3 nozzles, degreasing wipes, disposable gloves. Cartridge fi ts standard 425mm 

mastic/skeleton gun. 


Sponge 5/3.5mm 



101 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


102 

Consumables 

Fibre Restraint Methods 


At splice locations which are subject to thermal expansion/contraction of the microduct or vibration, it is essential that an Emtelle approved 

method of fi bre restraint is used. Examples of such splice locations which can experience signifi cant solar heating or vibration are 

(but not limited to): 

• street cabinets 

• access chambers 

• installations next to railway tracks 

The fi bre restraint solutions approved by 

Emtelle are:- 

• Lock and Block 

• Fibre Grip Connector (5-3mm and 8-3mm) 

(pack of 10 kits) 

• Fibre Grip Microduct (3.5mm bore) (pack of 100) 

Type Adhesive system based on 

a 2-part epoxy resin. 

Product Code 

5mm 12mm 

Lock-and-Block Fibre Grip Microduct Fibre Grip Connector 

Tapered rubber stopper 

inserted into microduct 

If the splice location is temperature stable then fi bre unit restraint may not be necessary. Please contact your local Emtelle representative for advice. 


Tapered rubber stopper held 

in tapered connector 

5-3mm 8-3mm 

70207 

9313 9731 70183 70184 

Water Block Yes Yes Yes 

Restraint Ability 

Compatible microduct OD/ID 

High (12N) Medium (1N) Medium (1N) 

3/2.1mm Yes No Yes 

5/3.5mm Yes Yes Yes 

8/3.5mm Yes Yes Yes 

8 to 16mm OD Yes No No 

Aerial Yes No No 

Microcable Fibre Unit 2, 4, 8, 12 2, 4 2, 4 

Transport Tube if required 3/2.1mm Code 60001 Yes No Yes 

■ Fibre Grip Microduct 

Device for restraining and water blocking Emtelle 

Fibre Units (2f and 4f) in microduct with a 3.5mm 

bore. The device is tapered with a central passage. 

Fibre unit is threaded onto the device which is then 

pushed into the end of a 3.5mm bore microduct. 

Product Code Description Unit 

70207 Rubber Stop 3.5/0.8mm Bag of 100 

9873 Rubber Stop 3.5/0.8mm Bag of 500 

71350 Rubber Stop 3.5/0.8mm split Bag of 500 



Consumables 

■ Blowing Lock Lock and and Beads Block Block 


The “lock and block” provides an enhanced water-block and retention method for Emtelle microcable fi bre units (all fi bre counts up to and 

including 12 fi bres) in 3mm*, 5mm, 7mm*, 8mm* 10mm*, 12mm, 14mm* and 16mm* Emtelle microducts. (*Note 7, 10, 14, 16mm with 

reducer/enlargers ) 

The fi bre unit is retained by bonding the fi bre unit’s base to the resin blocking stem (5mm or 12mm) which fi ts into an appropriate 

connector. 

9240 

9242 

9312 

9241 

5mm Kit for 3mm, 5mm, 8mm Microduct OD 12mm Kit for 7mm, 10mm, 12mm, 14mm, 16mm 

Microduct OD 

Product 

Description 

code 

9313 1 x Two part Epoxy Adhesive dispensing gun 

2 x Two part Epoxy Adhesive 

30 x Two part Epoxy Adhesive Mixing Nozzle 

100 x Resin Blocking Stems 

9312 100 x Resin Blocking Stems 

9241 Two part Epoxy Adhesive dispensing gun 

9240 Two part Epoxy Adhesive 

9242 30 x Two part Epoxy Adhesive Mixing Nozzle 

■ Blowing Lock Fibre and Grip Beads Block Connector 

Device for restraining and water blocking Emtelle Fibre Units 

(2f and 4f). The device uses a reducing connector with a small 

rubber insert which restrains the fi bre unit when microduct is fi tted. 

Transport tube (3mm) can then be fi tted if required. Note that restraint 

of 2f and 4f in 3/2.1mm microduct can be achieved provided 

appropriate microduct is used to activate the rubber insert. 

Product 

Description 

code 

9731 1 x Two part Epoxy Adhesive dispensing gun 

2 x Two part Epoxy Adhesive 

30 x Two part Epoxy Adhesive Mixing Nozzle 

50 x Locking Stem (12mm) 

9730 50 x Locking Stem 

9241 Two part Epoxy Adhesive dispensing gun 

9240 Two part Epoxy Adhesive 

9242 30 x Two part Epoxy Adhesive Mixing Nozzle 

Order Code: 70183 71074 70184 

Description 4f Fibre Grip Connector 5-3 4f Fibre Grip Connector 7-3 4f Fibre Grip Connector 8-3 

Pack Quantity Bag of 10x connectors with 10x 4f Fibre Grip 

Connector 9925 70407 70117 

Microduct Size 5/3.5mm to 3/2.1mm 7/5.5mm to 3/2.1mm 8/3.5mm to 3/2.1mm 

Connector Body Clear Clear Clear 

Length: 32mm 37mm 37mm 

Diameter: 12mm 15mm 15mm 




103 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


104 

Consumables 

Lubricant 

Mille-Tie 



Reduces frictional drag during the blowing of small diameter fi bre optic mini cable into microduct. 

Supplied: 24 x 240ml 

A plastic fastener suitable for securing tube bundles in position. 

Product code Description Unit 

7741 9mm x 305mm Box of 100 




TRAINING 

TRAINING 




105 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


106 

Training 

Emtelle compiles and develops its courses to suit our customers’ 

needs. We have deployed air blown fi bre all over the world, so you 

can be sure of our expertise. Training can be provided at Emtelle 

offi ces or at the customer’s offi ce*. In addition, Emtelle works with 

external training partners. Experts at these companies can provide 

high-quality instruction for technicians wishing to gain profi ciency 

in Emtelle’s air blown fi bre technology and products. Emtelle also 

provides two greatly respected courses, Installation & Maintenance 

and Design & Engineering. Completion of these courses can lead 

to Registered Communications Distribution Designer (RCDD) 

accreditation by BICSI, a global non-for-profi t organisation 

committed to the advancement of Information Transport Systems. 

Emtelle’s air blown fi bre courses are the only ones of their kind that 

lead to BICSI re(qualifi cation). 

We offer the following courses: 

Installation and Maintenance 

Design and Engineering of Networks 

Mini Cable Installation and Maintenance 

Aerial Installation Training 

Train the Trainer for Instructors 

Supervisor Training 

Features 

Learn the latest Fibre-to-the-Home (FttH) developments and 

what makes FttH so important for delivering high-speed 

communication to customers. 

Courses are limited to small numbers–six for all practical 

courses–so when we say it is a hands-on course, we mean YOUR 

hands on! 

You will receive a comprehensive, easy-to-follow course 

manual with clear diagrams and photographs, many of actual 

installations. If you are interested in the Design course, we will 

show you many examples of prestigious installations, such as 

the biggest FttH deployment in the world so far in Nuenen the 

Netherlands, the Sky Tower in New Zealand, Perth Metro ring, 

Sydney Harbour Bridge, Mexico Municipality, Zurich Airport, 

Woodlands (intelligent neighbourhood) Estate in South Africa, 

Reserve Bank of South Africa in Pretoria, and the award-winning 

innovation project for the Ministry of Defence type 45 destroyer. 

We use up-to-date training technology. Our courses are presented 

using multimedia projectors and we include actual products, 

when needed, to enhance core concepts and understanding. 

On our Installation and Maintenance course, you will use a range 

of equipment and materials that you will see in the fi eld. 

*subject to availability and minimum number. 


TRAINING 

Installation and Maintenance - Code 7505 

Tube bundles – different types of tube bundles and 

identifi cation of primary tubes 

Handling, deploying and testing of the tube bundles 

Health and safety procedures 

Tube connectors and jointing enclosures 

Fibre bundles stripping and handling techniques 

Blowing equipment and operation 

Blowing techniques including point-to-point blows, centre 

blowing and onward blowing 

Maintenance of the blowing equipment and changing 

blowing head to accommodate different fi bre sizes 

Choosing maximum blowing distances for certain tube and fi bre 

combinations 

Installation of Emtelle approved closures 

Design and Engineering - Code 7800 

Appreciate the key components and products used in an air 

blown fi bre network 

Learn the importance of product bend radius 

Learn what effect water and ice have on the individual products 

and the air blown fi bre system 

Appreciate how blowing distance is determined 

Learn about the various closure types and where they are used in 

the network 

Learn what components are needed to connect a customer 

Understand the importance of manhole selection 

Learn about the strengths of Emtelle’s portfolio consisting of 

Tube Bundles, Fibre Products, Accessories and Blowing Equipment 

Learn about the various deployment techniques 

Learn how to extend the blowing distance and the 

equipment needed 

Learn how to plan for a repair 

Work through detailed planning examples of actual 

deployments 



Training 

TRAINING 

Mini Cable Installation - Code 9230 

Handle, deploy and test tube bundles 

Prepare different tube bundles and identifi cation of primary 

tubes 

Apply health and safety procedures 

Understand the importance of tensile and thermal tube 

assembly relaxation 

Use tube connectors and jointing enclosures 

Operate blowing equipment, including the fl eeting machine 

Understand and apply blowing techniques including point-to- 

point blows, centre blowing and series blowing 

Maintain the blowing equipment and change out blowing head 

parts to accommodate different mini cable sizes 

*Train the Trainer - Code 9231 

Learn how to prepare for classroom instruction and the 

importance of the six Ps 

Know the importance of speaking at the 

correct rate to get your message across 

Know how to deal with diffi cult questions 

Gain confi dence by working through specially 

prepared exercises 

Appreciate the importance of using models, 

fl ip charts, OHPs and PPT presentations 

Supervisor Training 

For major projects Emtelle can provide 

training for supervisors to ensure installations 

are carried out to Installation 

& Maintenance standards. Please contact 

your local Emtelle representative for further 

information. 

* Note: This course is only available to 

Registered Installers with a 

minimum of 6 months installation experience. 

Aerial Installation Training – Code 9527 

Provide suitable aerial installation training and assessment for 

blown fi bre installation engineers. The course will cover the 

following topics; 

Health and Safety as it relates to working at height and in and 

around access chambers 

Handling, Deploying and Installing of aerial tight protected 

microduct products 

Stripping of aerial tight protected microduct products 

Installation of closures both aerial and Customer Lead In Points 

Installation of Mid Blow closures 

Operation of Blowing equipment for point to point and mid blow 

operations 




107 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


108 


TRAINING G 



EMTELLE OFFICES 

Headquarters 

Emtelle 

Haughhead 

Hawick 

TD9 8LF 

United Kingdom 

Tel : + 44 (0)1450 364000 

Fax : + 44 (0)1450 364001 

Emtelle Benelux and GACH 

Printerweg 43 

3821 AP Amersfoort 

The Netherlands 

Tel : +31 (0) 33 456 32 81 

Fax : +31 (0) 33 453 0715 

Emtelle Scandinavia 

Nørregade 25 

7280 Sønder Felding 

Denmark 

Tel: +45 86 28 84 88 

Fax: +45 86 28 81 52 

Emtelle Asia Pacific 

No. 4, Jalan PJU 1A/8 

Ara Damansara 

Taman Perindustrian Jaya 

47301 Petaling Jaya 

Selangor 

Malaysia 

Tel: +60 (0)3 7845 4406 

Fax: +60 (0)3 7845 4459 

Emtelle Australia 

16/103 George St 

Parramatta NSW 2150 

Australia 

Tel: +61 (0)2 8843 1346 

Fax: +61 (0)2 8843 1308 

www.emtelle.com 

www.fibre-to-the-home.com 

Emtelle Australia 

Unit 17, The Business Building 

328 Albany Highway 

Victoria Park 

Perth WA6100 

Australia 

Tel: +61(0)8 947 02761 

INNOVATION IS I N NOUR OUR N O OTRADITION TRADITION 

V A T I O N A N D F L E X I B I L I T Y 

Emtelle India 

12th Floor, Gopal Das Bhawan 

28 Barakhamba Road 

Connaught Place 

New Delhi - 110001 

India 

Tel: +91 11 4242 8800 

Fax: +91 11 4242 8801 



109 


FttX 

Customers 


Tube Tube Bundle 

Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions


110 

Emtelle UK Limited 

Conditions Of Sale Of Goods 

1. INTERPRETATION 

1.1 In these terms and conditions the following words have the 

following meanings: 

“Buyer” the person(s) or company whose order for 

the Goods is accepted by the Company; 

“Company” Emtelle UK Limited of Haughhead, Hawick, 

Scotland, TD9 8LF; 

“Contract” any contract between the Company and 

the Buyer for the sale and purchase of the 

Goods; 

“Goods” any goods which the Company is to supply 

to the Buyer (including any of them or any 

part of them); 

“Force means all causes beyond the reasonable 

Majeure” control of a party to this Agreement 

including, without limitation, acts of god, 

war, fi re, industrial disputes, fl ood, tempest, 

national emergencies and the diffi culty in 

obtaining materials except at unreasonably 

enhanced prices due to any of the foregoing 

reasons; 

“Intellectual means patents, trade marks, service marks, 

Property copyright, design rights and moral rights 

Rights” together with any or all goodwill relating or 

attached thereto; 

1.2 The headings in these terms and conditions are for 

convenience only and shall not affect their interpretation. 

2. FORMATION AND INCORPORATION 

2.1 Subject to any variation under conditions 2.4, the Contract 

will be on these terms and conditions set out below to the 

exclusion of all other terms and conditions (including any 

terms or conditions which the Buyer purports to apply 

under any purchase order, confi rmation of order or similar 

document.) 

2.2 Each order for Goods by the Buyer from the Company 

shall be deemed to be an offer by the Buyer to purchase 

Goods subject to these terms and conditions. 

2.3 No terms or conditions endorsed upon, delivered with or 

contained in the Buyer’s purchase order, specifi cation or 

similar document will form part of this Contract simply as 

a result of a reference to such document being referred to 

in this Contract. 

2.4 Any variation to these terms and conditions and any 

representations about the Goods shall have no effect 

unless expressly agreed in writing and signed by an 

authorised signatory of the Company. 

2.5 Acceptance of delivery of the Goods shall be deemed to 

be conclusive evidence of the Buyer’s acceptance of these 

terms and conditions. 

2.6 The Buyer must ensure that the terms of its order and any 

applicable specifi cation are complete and accurate. 

2.7 Any quotation is given on the basis that no contract will 

come into existence until the Company despatches an 

acknowledgment of order to the Buyer. Any quotation is 

valid for a period of 30 days from its date provided the 

Company has not previously withdrawn it. 

2.8 The Company accepts orders subject to the absolute right 

to cancel and rescind contracts in cases where the Buyer 

or the terms stated are not acceptable to the Company’s 

insurers or, where applicable, to the Export Credit 

Guarantee Department or to any other Governmental or 

other body guaranteeing overseas contracts. 

3. DESCRIPTION 

3.1 The description of the Goods shall be as set out in the 

Company’s quotation. 

3.2 All drawings, descriptive matter, specifi cations and 

advertising issued by the Company or the manufacturer 

of the Goods and any descriptions or illustrations 

contained in the Company’s or manufacturer’s catalogues 

or brochures are issued or published for the sole purpose 

of giving an approximate idea of the Goods described in 

them. They will not form part of the Contract. 

3.3 The Company may make any changes to the specifi cation, 

design, materials or fi nishes of the Goods which are 

required to conform with any applicable safety or other 

statutory requirements. 

TERMS AND CONDITIONS OF SALE OF GOODS 

4. DELIVERY 

4.1 If the quoted price does not include carriage, delivery will 

take place at the Company’s place of business. 

4.2 The Buyer will take delivery of the Goods within 7 days of 

the Company giving it notice that the Goods are ready for 

delivery. 

4.3 If the quoted price includes carriage, delivery will be 

deemed to take place at the point of entry to the Buyer’s 

works or site specifi ed in the Contract and the Goods 

shall be delivered by such means as the Company thinks 

fi t unless the Buyer has specifi ed in its order the details of 

the contract with a carrier which it reasonably requires, 

having regard to the nature of the Goods and the other 

circumstances of the case. 

4.4 The carrier shall be deemed to be the Buyer’s agent except 

for the purposes of sections 44, 45 and 46 of the Sale of 

Goods Act 1979. 

4.5 Delivery of the Goods shall be accepted at any time of day. 

4.6 Any dates specifi ed by the Company for delivery of the 

Goods are approximate only and may not be made of the 

essence by notice. If no dates are so specifi ed, delivery 

will be within a reasonable time. 

4.7 Subject to the other provisions of these terms and 

conditions the Company will not be liable for any loss 

(including loss of profi t), costs, damages, charges or 

expenses arising directly or indirectly out of delay or 

failure to deliver the Goods (even if caused by the 

Company’s negligence). 

4.8 The Buyer must accept delivery of the Goods and pay for 

them in full unless the Buyer shall have served notice 

on the Company requesting delivery and shall not have 

received the Goods within four weeks thereafter in which 

event the Buyer may cancel this Agreement to the extent 

it relates to the Goods which were subject to such delivery 

without further liability for the Goods. 

4.9 For orders of less than £1000 (ex VAT) the Company 

reserves the right to charge carriage at the rate charged 

by the haulier to the Company. 

4.10 The Buyer will be responsible for loading and offl oading 

and will, unless otherwise agreed, provide at its expense 

at the delivery point adequate and appropriate equipment 

and manual labour for off-loading or loading the Goods. 

4.11 The Buyer will indemnify the Company against any 

liability and expense (whether arising under statute or 

common law) caused by the Buyer’s failure to provide 

appropriate equipment and manual labour for off-loading 

or loading (whether or not the off-loading or loading is 

supervised by or on behalf of the Buyer) for: 

4.11.1 any personal injury to or death of any of the Company’s 

employees, agents or sub-contractors or any third party; 

and 

4.11.2 any damage to or loss of any property of the Company, its 

employees, agents or sub-contractors or any third party. 

4.12 The Company may deliver to the Buyer Goods up to 

5% more or 5% less than the quantity ordered. The 

Buyer shall accept delivery of Goods within such limits 

without objection but invoices shall be adjusted to actual 

quantities. 

4.13 Where the quoted price includes carriage the Company 

will not be liable for loss or damage in transit unless 

notice of such loss or damage is given to the carriers and 

to the Company:- 

4.13.1 in the case of extrusions at the time of delivery, by 

endorsement on the delivery documentation; 

4.13.2 in all other cases by written notifi cation to the Company 

within 3 days of delivery and by endorsement on the 

delivery documentation. 

5. NON-DELIVERY 

5.1 The quantity of any consignment of Goods as recorded by 

the Company upon despatch from the Company’s place 

of business shall be conclusive evidence of the quantity 

received by the Buyer on delivery unless the Buyer can 

provide conclusive evidence proving the contrary. 

5.2 The Company shall not be liable for any non-delivery of 

Goods (even if caused by the Company’s negligence) 

unless written notice is given to the carrier and the 

Company within 3 days of the date when the Goods 

would in the ordinary course of events have been 

received. 

5.3 Any liability of the Company for the non-delivery of any 

one order of Goods shall be limited to replacing the 

Goods for that order within a reasonable time or issuing 

a credit note at the pro rata contract rate against any 

invoice raised for such Goods. 

6. PACKING 

All pallets and returnable packaging and containers 

will remain the property of the Company at all times. 


It is the Buyer’s responsibility to return all packing and 

containers to the Company and should such packing and 

containers not be returned within the period specifi ed in 

the Company’s quotation, in good condition and carriage 

paid, a charge shall be made in full for the loss of such 

packing and containers. 

7. STORAGE 

7.1 If the Buyer fails to take delivery of any of the Goods when 

they are ready for delivery or to provide any instructions, 

documents, licences or authorisations required to enable 

the Goods to be delivered on time (except because of the 

Company’s fault) risk in the Goods will pass to the Buyer 

(including, without limitation, for loss or damage caused 

by the Company’s negligence), the Goods will be deemed 

to have been delivered and (without prejudice to its other 

rights) the Company may: 

7.1.1 store or arrange for the storage of the Goods until actual 

delivery or sale and charge the Buyer for all related costs 

and expenses (including, without limitation, storage and 

insurance); and/or 

7.1.2 following reasonable notice to the Buyer sell any of the 

Goods at the best price reasonably obtainable in the 

circumstances and charge the Buyer for any shortfall 

below the price under the Contract. 

7.2 The Company is not responsible for demurrage charges or 

additional costs resulting from delay in unloading. 

8. RISK/OWNERSHIP 

8.1 Risk of damage to or loss of Goods shall pass to the Buyer 

upon delivery. 

8.2 Notwithstanding delivery and the passing of risk, and 

solely for the purposes of securing payment of all monies 

due or to become due to the Company by the Buyer on 

any account, ownership of the Goods shall not pass to the 

Buyer until the Company has received in full (in cash or 

cleared funds) all sums due to it in respect of: 

8.2.1 the Goods; and 

8.2.2 all other sums which are or which become due to the 

Company from the Buyer on any account. 

8.3 Until ownership of the Goods has passed to the Buyer, the 

Buyer must: 

8.3.1 hold the Goods on a fi duciary basis as the Company’s 

bailee; 

8.3.2 store the Goods (at no cost to the Company) separately 

from all other goods of the Buyer or any third party in 

such a way that they remain readily identifi able as the 

Company’s property; 

8.4 The Company shall be entitled to retake possession of any 

Goods for which the price shall not have been paid in full 

when due and for that purpose the Company is authorised 

to enter into any premises of the Buyer or any third party 

where the Goods are or may be stored and repossess the 

Goods. 

8.5 The Company may in respect of all unpaid debts due 

from the Buyer under this or any other contract have a 

general lien on all Goods and property of the Buyer in 

the Company’s possession (although such Goods or 

some of them may have been paid for) and shall after 

the expiration of twenty eight days written notice to the 

Buyer be entitled to dispose of such Goods and property 

as it deems fi t and apply the proceeds towards such debts, 

and remaining sums shall be held on trust. 

9. PRICE AND PAYMENT 

9.1 The price for the Goods shall be the Company’s quoted 

price which shall be binding upon the Company only if 

the Buyer accepts the Company’s quotation within 30 

days after which time it may be altered by the Company 

without notice. 

9.2 The Company may increase the price of the Goods 

to refl ect any increase in the cost of manufacture or 

distribution of the Goods which is due to any factor 

beyond the reasonable control of the Company; 

this includes (without limitation) foreign exchange 

fl uctuation, currency regulation, alteration of duties and 

taxes, increase in cost of labour, materials and other 

manufacturing costs and transport costs, changes in rates 

of insurance, alterations in duties or import variations, 

or by reason of any cause beyond the control of the 

Company 

9.3 The price for the Goods is exclusive of any value added tax 

or any other applicable tax which the Buyer shall pay in 

addition when it is due to pay for the Goods unless this is 

specifi cally shown. 

9.4 All payments shall be made to the Company in the United 

Kingdom in the currency stipulated in the Company’s 

quotation to the Buyer. 

9.5 Unless otherwise stated, payment terms are “net monthly 



TERMS AND CONDITIONS OF SALE OF GOODS 

account”, which is to be interpreted as “payment to be 

made before the end of the calendar month following 

the calendar month during which the Goods were 

invoiced”. Time of payment shall be of the essence. No 

payment shall be deemed to have been received until the 

Company has received cleared funds. 

9.6 If the Buyer’s account is overdue for payment, the 

Company reserves the right to withhold or suspend 

deliveries under this Contract or any other Contract with 

the same Buyer Any such withholding or suspension 

shall not give rise to any claim whatsoever by the Buyer 

and shall be without prejudice to the Company’s right 

to recover any amount due from the Buyer and to the 

exercise of any of its rights by the Company. 

9.7 If the Buyer’s account is overdue for payment, the 

Company reserves the right to charge interest at 4% per 

annum over the UK Base Rate of HSBC plc for the time 

being in force on the amount overdue. 

9.8 The right of the Buyer to set off the value of any shortage, 

defective Goods or Goods not otherwise conforming to 

the Contract shall be restricted to the specifi c invoice for 

the Goods in question and shall not apply to previous or 

future accounts. 

10. WARRANTY 

10.1 In the event of any Goods supplied by the Company and 

not being of its own manufacture being proved to be 

defective or failing in service, the Buyer shall be entitled 

only to, and limited to, such restitution as the Company 

actually receives from the manufacturer and/or supplier 

to the Company. 

10.2 The Company warrants that (subject to the other 

provisions of these terms and conditions) upon delivery 

the Goods are, and for a period of 12 months from the 

date of delivery will be, of satisfactory quality under 

the Sale of Goods Act 1994 and are fi t for the normal 

purpose for which they have been designed and, where 

applicable conform to the relevant British Standard. 

10.3 The Company shall not be liable for a breach of the 

warranty in condition 10.2 unless: 

10.3.1 the Buyer gives written notice of the defect to the 

Company and, if the defect is as a result of damage in 

transit, to the carrier within 14 days of: 

10.3.1.1 the date of delivery (where the defect would be apparent 

to the Buyer upon a reasonable inspection); or 

10.3.1.2 the date when the Buyer knew or ought reasonably to 

have known of the defect (where the defect would not 

be apparent to the Buyer upon a reasonable inspection); 

and 

10.3.2 the Company is given a reasonable opportunity after 

receiving the notice of examining such Goods and the 

Buyer (if asked to do so by the Company) returns such 

Goods to the Company for the examination to take place 

there. 

10.4 The Company shall not be liable for a breach of the 

warranty in condition 10.2 if: 

10.4.1 the defect arises because the Buyer failed to follow the 

Company’s oral or written instructions as to the storage, 

installation, commissioning, use or maintenance of the 

Goods or (if there are none) good trade practice; or 

10.4.2 the Buyer alters or repairs such Goods without the 

written consent of the Company; or 

10.4.3 the defect in such Goods arises from any design defect 

in any drawing, design or specifi cation supplied or 

approved by the Buyer. 

10.5 If the Buyer makes a valid claim against the Company 

based on a defect in the quality of the Goods, the 

Company shall at its option repair or supply replacement 

Goods (or the defective part) or refund the price of such 

Goods at the pro-rata contract rate. 

10.6 If the Company complies with condition 10.5 it shall 

have no further liability for breach of the warranty in 

condition 10.2 in respect of the quality of such Goods. 

10.7 Any defective Goods will belong to the Company and 

any Goods which are repaired or which are re-supplied 

will be warranted on these terms and conditions for the 

unexpired portion of the 12 month period. 

11. LIMITATION OF LIABILITY 

11.1 The following provisions set out the entire liability of the 

Company (including any liability for the acts or omissions 

of its employees, agents and sub-contractors) to the 

Buyer in respect of: 

11.1.1 any breach of these terms and conditions; and 

11.1.2 any representation, statement or tortious act or omission 

including negligence arising under or in connection with 

the Contract; 

11.2 All warranties, conditions and other terms implied by 

statute or common law (save for the conditions implied 

by section 12 of the Sale of Goods Act 1979) are excluded 

from the Contract. 

11.3 Nothing in these terms and conditions excludes or limits 

the liability of the Company for death or personal injury 

caused by the Company’s negligence or fraudulent 

misrepresentation. 

THE BUYER’S ATTENTION IS PARTICULARLY DRAWN TO 

THE PROVISIONS OF CONDITIONS 11.4 AND 11.5 

11.4 Subject to conditions 11.2 and 11.3: 

11.4.1 notwithstanding the provisions of any other terms 

and conditions herein, the Company’s total liability in 

contract, tort (including negligence or breach of statutory 

duty), misrepresentation, restitution or otherwise, arising 

in connection with the performance or contemplated 

performance of this contract shall be limited in amount 

to the amount of the price of the Goods; and the parties 

agree that this condition is reasonable and that the 

contract price is based on the level, exclusions and limits 

of liability in this condition 11. 

11.4.2 the Company shall not be liable to the Buyer for: 

(I) loss of profi t; or 

(II) loss of business; or 

(III) business interruption; or 

(IV) depletion of goodwill and/or similar losses; or 

(V) loss of anticipated savings; 

in each case whether direct, indirect or consequential, 

or for any claims for consequential compensation 

whatsoever (howsovever caused) which arise out of or 

in connection with this Contract, in each of the above 

cases whether or not caused by the negligence of the 

Company, its employees, agents or sub-contractors. 

11.5 The Buyer shall indemnify the Company against all 

liability, actions, proceedings, costs, claims, damages 

or demands in any way connected with this contract 

brought or threatened to be brought against the 

Company by any third party except to the extent the 

Company is liable to the Buyer in accordance with these 

terms and conditions. 

11.6 The Buyer shall indemnify the Company against all 

damages, penalties, costs and expenses to which the 

Company may become liable through any work done 

in accordance with specifi cations, drawings or special 

requirements of the Buyer which may involve an 

infringement or alleged infringement of any Intellectual 

Property Rights of a third party or may cause any 

actionable damage or loss to any third party. 

12. PERFORMANCE OF CONTRACT 

12.1 The Company may deliver the Goods by installments 

and each installment shall be deemed to be sold under 

a separate contract, and no failure of or delay in delivery 

of any installment nor any defect in the contents thereof 

shall entitle the Buyer to treat the contract as repudiated 

with regard to any remaining installments. 

12.2 If subsequent to any contract of sale which is subject to 

these conditions a contract of sale is made with the same 

Buyer without express reference to these conditions, 

such contract, howsoever made, shall be deemed to be 

subject to these conditions. 

13. TECHNICAL ADVICE AND INFORMATION 

13.1 The Company may at the request of the Buyer, without 

being under any obligation to do so, furnish technical 

advice concerning the use of the Goods and such 

assistance will be given to the best of the Company’s 

ability but this shall be on the express understanding 

that any such advice or assistance is given and accepted 

at the Buyer’s risk and the Company shall not be liable 

for any loss, damage or claims arising therefrom. 

13.2 No liability will be accepted for work carried out or 

material supplied to the Buyer’s own drawings, design or 

specifi cation. 

13.3 The submission of a quotation or acceptance of an order 

by the Company in no way implies any responsibility 

on its part for any bye law, planning or other approval, 

which may be required by the Buyer. 

14. FORCE MAJEURE 

Deliveries may be partially or totally suspended by 

either party during any period in which it is prevented 

from manufacturing, delivering or taking delivery of the 

Goods through any event of Force Majeure and if such 

party notifi es the existence of such Force Majeure to the 

other party in writing. If, because of such Force Majeure, 

the Company is unable to supply the total requirement 

of the Goods the Company may allocate its available 


supply among all of its customers, including those not 

under contract, as the Company thinks fi t. Deliveries 

so suspended for three months may thereafter during 

such suspension be cancelled without liability but the 

Contract between the parties shall otherwise remain 

unaffected. 

15. PATENTS AND TRADEMARKS 

No representation warranty or indemnity is given by the 

Company that the Goods do not infringe any Intellectual 

Property Rights of a third party. 

16. TERMINATION 

16.1 The Contract will terminate immediately upon service 

of a written notice of termination by the Company on 

the Buyer on the happening of any one or more of the 

following events; the Buyer has a bankruptcy order made 

against him or makes an arrangement or composition 

with his creditors or otherwise takes the benefi t of any 

Act for the time being in force for the relief of insolvent 

debtors, or (being a body corporate) convenes a meeting 

of creditors (whether formal or informal) or enters into 

liquidation (whether voluntary or compulsory), except 

a solvent voluntary liquidation for the purpose only 

of reconstruction or amalgamation, or has a receiver, 

manager, administrator or administrative receiver 

appointed of its undertaking or any part thereof, or a 

resolution is passed or a petition presented to any court 

for the winding-up of the Buyer or for the granting of 

an administration order in respect of the Buyer or any 

proceedings are commenced relating to the insolvency 

or possible insolvency of the Buyer or the Buyer suffers 

or allows any execution whether legal or equitable to be 

levied on his/its property or obtained against him/it, or 

fails to observe or perform any of his/its obligations or 

duties under the Contract or any other contract between 

the Company and the Buyer or is unable to pay its debts 

within the meaning of section 123 of the Insolvency Act 

1986 or the Buyer ceases to trade. 

16.2 The Company’s rights contained in condition 8 (but not 

the Buyer’s rights) shall continue beyond the discharge of 

the Buyer’s and the Company’s primary obligations under 

the Contract consequent upon its termination. 

16.3 The termination of the Contract howsoever arising shall 

be without prejudice to the rights and duties of either the 

Buyer or the Company accrued prior to termination. 

17. GENERAL 

17.1 Time for performance of all obligations of the Buyer is of 

the essence. 

17.2 Each right or remedy of the Company under this Contract 

is without prejudice to any other right or remedy of the 

Company whether under this Contract or not. 

17.3 Any provision of this Contract which is held by a 

competent authority to be invalid, void, voidable, 

unenforceable or unreasonable (in whole or in part) 

shall to the extent of such invalidity, voidness, voidability, 

unenforceability or unreasonableness be deemed 

severable and the other provisions of this Contract and 

the remainder of such provision shall not be affected. 

17.4 Failure by the Company to enforce or partially enforce 

any provision of this contract will not be construed as a 

waiver of any of its rights under this Contract. 

17.5 The Company may assign, license or sub-contract all or 

any part of its rights or obligations under this contract 

without the Buyer’s consent. 

17.6 This Contract is personal to the Buyer who may not 

assign, license or sub-contract all or any of its rights or 

obligations under this Contract without the Company’s 

prior written consent. 

17.7 The parties to this Agreement do not intend that any of 

its terms will be enforceable by virtue of the Contracts 

(Rights of Third Parties) Act 1999 by any person not a 

party to it. 

17.8 Any notice required or permitted to be given by either 

party to the other under these conditions shall be in 

writing addressed to that other party at its registered 

offi ce or principal place of business or such other address 

as may at the relevant time have been notifi ed pursuant 

to this provision to the party giving the notice. 

17.9 The formation, construction, performance, validity and 

all aspects of this Contract are governed by English Law 

and the parties submit to the exclusive jurisdiction of the 

English Courts. 



111 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Terms & Conditions

Air Blown Fibre FttX Customers Fibre Products Tube Bundle Sub-Duct Accessories Installation Equipment Tools Training Emtelle Offi ces Index 

112 

Index 


Product Code Description Page 

9032 Microcable FU 2fu SM G.652d 16 





9506 Microcable FU 2fu SM G.657A1 16 




9179 Microcable FU 12fu SM G.655 16 

9021 Microcable FU 2fu MM OM1 62.5/125 16 




7653 Microcable FU 2fu MM OM2 50/125 16 







7714 Microcable FU 12fu MM OM3 16 

9180 Microcable FU 2fu OM4 50/125 16 




9430 Pre-Connect 2FU SM G.652d (1 connector) SC/UPC 30m 17 







9437 Pre-Connect 2FU SM G.652d (1 connector) SC/APC 30m 17 







9444 Pre-Connect 2FU SM G.652d (1 connector) LC/UPC 30m 17 







9451 Pre-Connect 2FU SM G.652d (1 connector) LC/APC 30m 17 







9360 Pre-Connect 2FU SM G.652d (2 connectors) SC/UPC 30m 17 





Loose Protected Microduct 23 

Microduct / Primary tube 24 

1997762 40B Dual Duct 2x40/3.7 - 2x1000m 25 

1997762 50B Dual Duct 2x50/4.5 - 2x600m 25 

1997762 40C Triple Duct 3x40/3 - 3x600m 25 

1997762 50C Triple Duct 3x50/4 - 3x400m 25 

Drop199782041 Multi-drop 6x12/8 x 1000 25 

Tight Protected Microduct 26 

Aerial 34 

60889 Drop 5/3.5mm x 5000m 34 

8194 Drop 5/3.5mm x 1000m 34 

60789 Drop 6/2.7mm x 4000m 34 

61508 F8 1-way 6/2.7mm + copper x 2000m 34 

61198 F8 1-way 6/2.7mm + copper PIFU x 2000m 34 

61165 F8 1-way 10/8mm x 2000m 34 

60662 F8 1-way 14/10mm x 1000m 34 

61166 F8 4-way 4/2.7mm x 4000m 34 

60890 F8 4-way 5/3.5mm x 4000m 34 

61669 F8 4-way 10/8mm x 2000m 34 

60893 F8 4-way 10/8mm x 1000m 34 

61170 F8 4-way 12/10mm x 1000m 34 

60752 F8 7-way 4/2.7mm x 4000m 34 

8195 F8 7-way 5.0/3.5mm x 4000m 34 

60758 F8 7-way 10/8mm x 1000m 34 

60759 F8 7-way 12/10mm x 1000m 34 

60891 F8 9-way 5/3.5mm + 1x10/8mm x 2000m 34 

61167 F8 10-way 5/3.5mm + 1x12/10mm x 2000m 34 

60563 F8 12-way 4/2.5mm + 1x 12/8mm 2000m 34 

60894 F8 12-way 4/2.7mm + 1x12/10 x 2000m 34 

60753 F8 12-way 4/2.7mm x 3000m 34 

60892 F8 12-way 5/3.5mm + 1x10/8mm x 2000m 34 

60755 F8 12-way 5/3.5mm x 2000m 34 

60757 F8 17-way 5/3.5 + 1x10/8mm 1000m 34 

60756 F8 19-way 5/3.5mm x 2000m 34 

60754 F8 24-way 4/2.7mm + 1x8/6mm 2000m 34 

Aerial Metal Free / GRP 34 

61171 F8MF 1-way 8/5mm x 1000m 34 

61172 F8MF 1-way 14/10mm x 1000m 34 

61178 F8MF 2-way 12/10mm + 8x5/3.5mm x 2000m 34 

61173 F8MF 4-way 5/3.5mm x 2000m 34 

61177 F8MF 4-way 10/8mm x 1000m 34 

61174 F8MF 7-way 5/3.5mm x 2000m 34 

61175 F8MF 9-way 5/3.5mm + 1x10/8mm x 2000m 34 

61176 F8MF 12-way 5/3.5mm + 1x10/8mm x 1000m 34 

Ancillary Products 39 

199807 110 Warning Net - M10 With search wire 10cm x 500m 39 

199807 010 Warning Net - M10 Without search wire 10cm x 500m 39 




199817 025 Warning Tape - 25/0.3 mm x 250m 39 

199817 050 Warning Tape - 50/0.1mm x 500m 39 

4857 Marker Tape: Caution Tel Cables 39 

4785 Marker Tape: Fibre Optic Cable 39 

TERMS AND CONDITIONS OF SALE OF GOODS INDEX 






9367 Pre-Connect 2FU SM G.652d (2 connectors) SC/APC 30m 17 







9374 Pre-Connect 2FU SM G.652d (2 connectors) LC/UPC 30m 17 







9381 Pre-Connect 2FU SM G.652d (2 connectors) LC/APC 30m 17 



































60963 Pre-Installed FU 8/3.5mm + 2 PIFU MM OM3 17 

8476 Pre-Installed FU 8/3.5mm + 2 PIFU G652d 17 

8497 Pre-Installed FU 8/3.5mm + 4 PIFU G652d 17 

60982 Pre-Installed FU 8/3.5mm + 2 PIFU G657A1 17 


4785W Marker tape:fi bre optic cable (contains tracer wire) 39 

199818 115 Plastic Tape Tile 100 x 1.5 39 








5606 Trench Marker Tile: Caution Fibre Optic Cable 39 

Direct Bury 31 

6627 DB 1-way 5/3.5mm x 4000m 31 

6893 DB 1-way 10/8mm x 2000m 31 

60360 DB 1-way 12/10mm x 2000m 31 

6406 DB 2-way 5/3.5mm x 4000m 31 

6798 DB 2-way 10/8mm x 2000m 31 

60361 DB 2-way 12/10mm x 2000m 31 

6375 DB 4-way 5/3.5mm x 4000m 31 

6655 DB 4-way 10/8mm (round) x 2000m 31 

60736 DB 4-way 12/10mm (round) x 2000m 31 

6314 DB 7-way 5/3.5mm x 4000m 31 

6593 DB 7-way 10/8mm x 2000m 31 

60365 DB 7-way 12/10mm x 1000m 31 

6556 DB 12-way 5/3.5mm x 4000m 31 

60152 DB 12-way 10/8mm x 1000m 31 

6352 DB 19-way 5/3.5mm x 3000m 31 

6557 DB 24-way 5/3.5mm x 2000m 31 

Direct Bury metal free (DBmf) 27 

8213T DBmf 1-way 5/3.5mm x 500m 27 

8233T DBmf 1-way 5/3.5mm x 500m coil 27 

8216TS DBmf 1-way 5/3.5mm x 2000m 27 

8239T DBmf 1-way 10/8mm x 2000m 27 

8361T DBmf 2-way 3/2.1mm x 2000m 27 

8217T DBmf 2-way 5/3.5mm x 2000m 27 

60208 DBmf 2-way 10/8mm x 2000m 27 

60212 DBmf 2-way 12/10mm x 2000m 27 

8362T DBmf 4-way 3/2.1mm x 4000m 27 

8218T DBmf 4-way 5/3.5mm x 4000m 27 

60209 DBmf 4-way 10/8mm x 2000m 27 

60213 DBmf 4-way 12/10mm x 2000m 27 

8363T DBmf 7-way 3/2.1mm x 4000m 27 

8219T DBmf 7-way 5/3.5mm x 4000m 27 

60211 DBmf 7-way 10/8mm x 2000m 27 

60144 DBmf 7-way 12/10mm x 1000m 27 

8364T DBmf 12-way 3/2.1mm x 4000m 27 

8220T DBmf 12-way 5/3.5mm x 4000m 27 

8365T DBmf 19-way 3/2.1mm x 4000m 27 

8221T DBmf 19-way 5/3.5mm x 3000m 27 

8247T DBmf 24-way 3/2.1mm x 2000m 27 

8222T DBmf 24-way 5/3.5mm x 2000m 27 

Direct Bury metal free (DBmf) heavy wall 28 

8351T DBmf 1-way 5/2.1mm x 500m 28 

60171 DBmf 1-way 7/3.5mm x 4000m 28 

60178 DBmf 1-way 7/4mm x 4000m 28 




INDEX 

Index 


Product Code Description Page Product Code Description Page 

8470 DBmf 1-way 8/3.5mm x 2000m 28 

8477 DBmf 1-way 8/3.5mm + sheath x 3000m 28 

60199 DBmf 1-way 10/6mm x 2000m 28 

60014 DBmf 1-way 12/8mm x 2000m 28 

8506 DBmf 1-way 14/10mm x 1400m 28 

60618 DBmf 1-way 16/12mm x 1000m 28 

60172 DBmf 2-way 7/3.5mm x 4000m 28 

60179 DBmf 2-way 7/4mm x 4000m 28 

60200 DBmf 2-way 10/6mm x 2000m 28 

60015 DBmf 2-way 12/8mm x 2000m 28 

8524 DBmf 2-way 14/10mm x 1400m 28 

60722 DBmf 2-way 16/12mm x 1000m 28 

60351 DBmf 3-way 10/6mm x 2000m 28 

60016 DBmf 3-way 12/8mm x 2000m 28 

8499 DBmf 3-way 14/10mm x 1400m 28 

60723 DBmf 3-way 16/12mm x 1000m 28 

60173 DBmf 4-way 7/3.5mm x 4000m 28 

60180 DBmf 4-way 7/4mm x 4000m 28 

60202 DBmf 4-way 10/6mm x 2000m 28 

60017 DBmf 4-way 12/8mm x 2000m 28 

60022 DBmf 4-way 14/10mm x 1400m 28 

60724 DBmf 4-way 16/12mm x 1000m 28 

60018 DBmf 5-way 12/8mm x 2000m 28 

60023 DBmf 5-way 14/10mm x 1400m 28 

60725 DBmf 5-way 16/12mm x 1000m 28 

60019 DBmf 6-way 12/8mm x 2000m 28 

60352 DBmf 6-way 14/10mm x 1400m 28 

60726 DBmf 6-way 16/12mm x 1000m 28 

60174 DBmf 7-way 7/3.5mm x 4000m 28 

60181 DBmf 7-way 7/4mm x 4000m 28 

60203 DBmf 7-way 10/6mm x 2000m 28 

60020 DBmf 7-way 12/8mm x 2000m 28 

8523 DBmf 7-way 14/10mm x 1400m 28 

60727 DBmf 7-way 16/12mm x 1000m 28 

60175 DBmf 12-way 7/3.5mm x 3000m 28 

60182 DBmf 12-way 7/4mm x 3000m 28 

60176 DBmf 19-way 7/3.5mm x 2000m 28 

60183 DBmf 19-way 7/4mm x 2000m 28 

60177 DBmf 24-way 7/3.5mm x 1000m 28 

60184 DBmf 24-way 7/4mm x 1000m 28 

Direct Bury metal free Wrapped (DBmf-Wrap) 30 

60763 DBmf-Wrap 2-way 12/8 x 2000m 30 

60767 DBmf-Wrap 2-way 14/10mm x 1000m 30 


60738 DBmf-Wrap 7-way 5/2.5mm x 4000m 30 

60760 DBmf-Wrap 12-way 7/3.5mm x 3000m 30 


Direct Install 32 

6285 DI 1-way 5/3.5mm x 4000m 32 

8357 DI 1-way 10/8mm x 2000m 32 

60744 DI 1-way 12/10mm x 2000m 32 

6286 DI 2-way 5/3.5mm x 4000m 32 

6797 DI 2-way 10/8mm x 2000m 32 

60745 DI 2-way 12/10mm x 2000m 32 

6287 DI 4-way 5/3.5mm x 4000m 32 

6709L DI 4-way 10/8mm x 2000m 32 

60746 DI 4-way 12/10mm x 2000m 32 

6438 DI 7-way 5/3.5mm x 4000m 32 

6886 DI 7-way 10/8mm x 2000m 32 

60478 DI 7-way 12/10mm x 2000m 32 

6870 DI 12-way 5/3.5mm x 4000m 32 

6289 DI 19-way 5/3.5mm x 3000m 32 

6701 DI 24-way 5/3.5mm x 2000m 32 

Low Fire Hazard 33 

6595 Primary 5/3.5mm x 4000m 33 

6634 Primary 5/3.5mm x 1000m 33 

6318 Primary 5/3.5mm x 500m 33 

61486 Primary 7/4mm x 1000m 33 

61487 Primary 7/4mm x 2000m 33 

6772 LFH 1-way 5/3.5mm x 1000m 33 

61488 LFH 1-way 7/4mm x 2000m 33 

61156 LFH 1-way 14/10mm x 1000m 33 

60008 LFH 1-way 14/10mm x 500m 33 

6403 LFH 2-way 5/3.5mm x 4000m 33 

6502 LFH 2-way 5/3.5mm x 1000m 33 

6403S LFH 2-way 5/3.5mm x 500m 33 

61371 LFH 2-way 7/4mm x 2000m 33 

61157 LFH 2-way 14/10mm x 1000m 33 

61158 LFH 3-way 14/10mm x 1000m 33 

Accessories 


Access Chambers 47 

9947 STAKKAbox QUAD FW1/EN1 600 X 450 X 150mm 47 




9117 STAKKAbox ULTIMA FW4 /EN4 915 X 445 X 150mm 47 

5397 STAKKAbox ULTIMA FW6/EN6 1310 X 610 X 150mm 47 



9124 STAKKAbox ULTIMA CW2 1220 X 675 X 150mm 47 

70474 STAKKAbox ULTIMA CW3 1800 X 675 X 150mm 47 

70473 STAKKAbox ULTIMA EN96 900 X 600 X 150mm 47 

70291 STAKKAbox ULTIMA EN99 900 X 900 X 150mm 47 

70477 STAKKAbox MODULA FW1 300 X 450 X 150mm 47 

70478 STAKKAbox MODULA FW1/EN1 600 X 450 X 150mm 47 

70480 STAKKAbox MODULA FW3/EN3 750 X 600 X 150mm 47 

70482 STAKKAbox MODULA FW4 /EN4 915 X 445 X 150mm 47 

70481 STAKKAbox MODULA EN96 900 X 600 X 150mm 47 

70479 STAKKAbox MODULA CW1 600 X 600 X 150mm 47 

41912 Wedge Box 1419 380 X 230mm 47 

32415 Wedge Box 1324 550 X 315mm 47 

73018 Wedge Box 1730 730 X 460mm 47 

Access Chambers Covers and Frames 48 

70352 Footway Cover unbadged FW1/EN1 300 X 450mm 48 

70358 Footway Cover unbadged FW1/EN1 600 X 450mm (RISING FRAME) 48 




9053 Footway Cover unbadged FW4 /EN4 915 X 445mm 48 


6404 LFH 4-way 5/3.5mm x 4000m 33 

6643 LFH 4-way 5/3.5mm x 1000m 33 

6511 LFH 4-way 5/3.5mm x 500m 33 

61372 LFH 4-way 7/4mm x 2000m 33 

61159 LFH 4-way 14/10mm x 1000m 33 

61160 LFH 6-way 14/10mm x 1000m 33 

6405 LFH 7-way 5/3.5mm x 4000m 33 

6610 LFH 7-way 5/3.5mm x 1000m 33 

6515 LFH 7-way 5/3.5mm x 500m 33 

61161 LFH 7-way 14/10mm x 1000m 33 

6533A LFH 12-way 5/3.5mm x 4000m 33 

6533 LFH 12-way 5/3.5mm x 1000m 33 

6533S LFH 12-way 5/3.5mm x 500m 33 

61489 LFH 12-way 7/4mm x 2000m 33 

6611A LFH 19-way 5/3.5mm x 4000m 33 

6611 LFH 19-way 5/3.5mm x 1000m 33 

6611S LFH 19-way 5/3.5mm x 500m 33 

61373 LFH 19-way 7/4mm x 1000m 33 

6612L LFH 24-way 5/3.5mm x 2000m 33 

6612 LFH 24-way 5/3.5mm x 1000m 33 

6513 LFH 24-way 5/3.5mm x 500m 33 

61490 LFH 24-way 7/4mm x 1000m 33 

Special Products 35 

Direct Bury metal free 37 

60771 DBmf 7-way (hex) 12/10mm x 2000m 37 

60772 DBmf 7-way (round) 12/10mm x 2000m 37 

Direct Bury fi lled metal free 

8224 DBfmf 3-way 10/8mm x 2000m 37 

60025 DBfmf 3-way 12/10mm x 2000m 37 

8225 DBfmf 4-way 10/8mm x 2000m 37 

60026 DBfmf 4-way 12/10mm x 2000m 37 

8226 DBfmf 5-way 10/8mm x 2000m 37 

60027 DBfmf 5-way 12/10mm x 2000m 37 

8227 DBfmf 7-way 10/8mm x 2000m 37 

60028 DBfmf 7-way 12/10mm x 1000m 37 

Direct Bury Rodent Proof 35 

8240 DBSA 7-way 5/3.5mm 35 

Direct Bury Termite Resistant 35 

6629 DBT 1-way 5/3.5mm x 4000m 35 

6571 DBT 2-way 5/3.5mm x 4000m 35 

6664 DBT 4-way 5/3.5mm x 4000m 35 

6570 DBT 7-way 5/3.5mm x 4000m 35 

8231 DBT 12-way 5/3.5mm x 3000m 35 

6954 DBT 19-way 5/3.5mm x 3000m 35 

8232 DBT 24-way 5/3.5mm x 2000m 35 

Direct Install metal free 38 

8321T DImf 1-way 5/3.5mm x 4000m 38 

8374T DImf 2-way 5/3.5mm x 4000m 38 

8353T DImf 4-way 5/3.5mm x 4000m 38 

8008LT DImf 7-way 5/3.5mm x 4000m 38 

8375T DImf 12-way 5/3.5mm x 4000m 38 

8367T DImf 19-way 5/3.5mm x 4000m 38 

60782 DImf 24-way 5/3.5mm x 2000m 38 

Mining Applications 35 

8240 DBSA 7-way 5/3.5mm 35 

61201 DBSA-LF 7-way 5/3.5mm 35 

61202 F8 4-way hybrid with copper cable 5/3.5mm 35 

LFH Rodent Proof 35 

8483 LFSA 7-way 5/3.5mm 35 

Plenum Rated 36 

6968 Plenum 1 Way 6.3/4.7mm UL Listing 36 



60795 Plenum 1 Way 6.3/4.7mm CSA Listing 36 



Pre-Installed Fibre Products 38 

Riser Rated 36 

60384 LFH Riser 1-way 5/3.5mm x 4000m UL Listing 36 







60798 LFH Riser 2-way 5/3.5mm x 4000m CSA Listing 36 



Sub Duct 41 




70349 Footway Cover unbadged EN96 900 X 600mm 48 

70292 Footway Cover unbadged EN99 900 X 900mm 48 

70386 Footway Cover CATV FW1/EN1 300 X 450mm 48 

TW2R Footway Cover CATV FW1/EN1 600 X 450mm (RISING FRAME) 48 




4816 Footway Cover CATV FW4 /EN4 915 X 445mm 48 



4776A Footway Cover CATV FW10/EN10 2320 X 740mm 48 


TW1R Footway Cover CATV TW1 560 X 260mm (RISING FRAME) 48 

TW4R Footway Cover CATV TW4/5 750 X 600mm (RISING FRAME) 48 

1419S Footway Cover CATV 1419 380 X 230mm (RISING FRAME) 48 



70350 Footway Cover C&W FW1/EN1 300 X 450mm 48 

70356 Footway Cover C&W FW1/EN1 600 X 450mm (RISING FRAME) 48 




4678 Footway Cover C&W FW4 /EN4 915 X 445mm 48 








113 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Index


114 

Index 

Accessories 


INDEX 


70373 Footway Cover C&W TW1 560 X 260mm (RISING FRAME) 48 

70347 Footway Cover C&W 1419 380 X 230mm (RISING FRAME) 48 



Access Chambers Ductile Iron Cover and Frames 48 

5111 Ductile Iron Cover & Frames CW1 600 X 600mm 100mm unbadged 48 



4716U Ductile Iron Cover & Frames CW2 1220 X 675mm 150mm unbadged 48 


70502 Ductile Iron Cover & Frames EN96 900 X 600 X 150mm unbadged 48 



70505 Ductile Iron Cover & Frames CW1 600 x 600 x 150mm unbadged 48 

70506 Ductile Iron Cover & Frames CW2 1220 x 675 x 150mm unbadged 48 

9561 Ductile Iron Cover & Frames CW1 600 x 600mm x 100mm CATV badge 49 





70374 Ductile Iron Cover & Frames CW1 600 x 600 x 100mm C&W badge 49 





70492 Ductile Iron Cover & Frames CW1 600 x 600 x 100mm CATV embossed badge 49 





70493 Ductile Iron Cover & Frames CW1 600 x 600 x 100mm C&W embossed badge 49 





Access Chamber furniture - Bolt on 49 

9498 Anchor Irons 50 

9991 Cable Bearer No.3 49 






9499 Foundation Bolts 50 

4500 Locking Pins 50 

4496 Manhole Step insitu 50 

9072 Manhole Step bolt on 50 

4839 Plastic Sump 50 

70616 Wall Bearer No.1 - Hole Positions 1 49 







Access Chamber furniture - Drop in 50 

70507 Drop on Furniture Kit STAKKAbox QUAD 50 

4496D Manhole Step - Drop in STAKKAbox QUAD 50 

Access Chamber Termination Box 

4531 Termination Box D Shape Swivel 50 

71133 Termination Box Square 115x115x75 50 

4604 Termination Box Square SID 130x140x75 50 

4579 Termination Box Triangular 50 

9978 Minicable Storage Reel with cover 50 

Aerial 

9257 Aerial Branch Closure 51 

70868 Aerial Manifold Closure (6-4mm) 51 

9416 Centre Point Blowing Dome 51 

71095 Plug Removal Tool 51 

71132 Wrap-around Closure 50/20 - 250 51 




Aerial Pole Fittings and Tools 

9253 Bolt 16 x 300mm 52 

9255 Buckles for banding BIB20 52 

9247 Cable Clamp AC10 320 52 

9249 Cable Clamp AC68 140 52 

9248 Cable Clamp AC68L 260 52 

9251 J-Hook for steel band: 'JR-SB' 52 

9354 J-Hook, bolt-through: 'JR' 52 

9254 Steel Banding, SB207 52 

9252 Suspension Clamp, 'ARC' 52 

9256 Tensioning Tool, BTS 52 

9246 Universal Pole Bracket UPB 52 

Connectors 

7316 Closedown Connector 3mm (John Guest) 74 



71161 Duct Seal 10mm/3.9-2.5mm 75 

71162 Duct Seal 10mm/5.0-3.9mm 75 

71163 Duct Seal 10mm/6.5-5.0mm 75 

71164 Duct Seal 10mm/8.0-6.5mm 75 

71165 Duct Seal 12mm/3.9-2.5mm 75 

71166 Duct Seal 12mm/5.0-3.9mm 75 

71167 Duct Seal 12mm/6.5-5.0mm 75 

71168 Duct Seal 12mm/8.0-6.5mm 75 

71169 Duct Seal 14mm/8.0-5.8mm 75 

71170 Duct Seal 14mm/10.0-8.0mm 73 

71171 Duct Seal 16mm/8.0-5.8mm 75 

71172 Duct Seal 16mm/10.0-8.0mm 75 

71173 Duct Seal 18mm/12.0-9.4mm 75 

71174 Duct Seal 20mm/12.0-9.4mm 75 

9932 End Cap 3mm 72 

9610 End Cap 3mm Solid (John Guest) 73 









9937 End Cap 10mm 72 

7486 End Cap 10mm Clear (John Guest) 73 


9938 End Cap 12mm 72 


9939 End Cap 14mm 72 

70153 End Cap 16mm 72 


71109 End Cap DB 7mm (John Guest) 73 

71106 End Cap DB 14mm (John Guest) 73 

70730 Gas Block Connector 3GB long 3mm (John Guest) 74 

70731 Gas Block Connector 3GB short 3mm (John Guest) 74 

70729 Gas Block Connector 4GB 4mm (John Guest) 74 



71355 Gas Block Connector 6-3GB 6-3mm reducer (John Guest) 74 

70875 Gas Block Connector 6-4GB 6-4mm reducer (John Guest) 74 

71110 Gas Block Connector 7GB 1.0-1.6 7mm (John Guest) 74 




6087 Gas Block Connector 8-5GB 8-5mm (John Guest) 74 








70194 Protected connector 7/3.5mm 72 



70136 Protected connector 8/6mm 72 




70728 Reducer 4 - 3mm Solid (John Guest) 73 

9926 Reducer 5/2.1 - 3/2.1mm 72 

9925 Reducer 5/3.5 - 3/2.1mm 72 

9638 Reducer 5 - 3mm Clear (John Guest) 73 


9502 Reducer 6.3 - 5mm Solid (John Guest) 73 

70407 Reducer 7/5.5 - 3/2.1mm 72 

70031 Reducer 7/5.5 - 5/3.5mm 72 

70117 Reducer 8/3.5 - 3/2.1mm 72 

6085 Reducer 8 - 5mm Clear (John Guest) 73 

9927 Reducer 8/6 - 5/3.5mm 72 


9928 Reducer 10/8 - 8/6mm 72 


9930 Reducer 12/10 - 10/8mm 72 

70034 Reducer 12/10 - 5/3.5mm 72 

9929 Reducer 12/10 - 7/5.5mm 72 

70035 Reducer 14/10 - 10/8mm 72 

9931 Reducer 14/10 - 12/10mm 72 

70036 Reducer 16/12 - 12/10mm 72 

9916 Straight Connector 3/2.1mm 72 

7312 Straight Connector 3/2.1mm Clear (John Guest) 73 

9917 Straight Connector 4mm 72 

71070 Straight Connector 4mm Solid (John Guest) 73 


7223 Straight Connector 5/3.5mm Clear (John Guest) 73 


7930 Straight Connector 6.3mm Solid (John Guest) 73 




9920 Straight Connector 8/6mm 72 

7222 Straight Connector 8/6mm Clear (John Guest) 73 




9732 Straight Connector 12/10mm Clear (John Guest) 73 

7263 Straight Connector 12/10mm Solid (John Guest) 73 






71108 Straight Connector DB 7/3.5mm Solid (John Guest) 73 

71190 Straight Connector DB 7/4mm (Solid) (John Guest) 73 

71105 Straight Connector DB 14/10mm Solid (John Guest) 73 

7314 Water Blocking Connector 3mm (John Guest) 74 

6089 Water Blocking Connector 5mm push-on (John Guest) 74 

71441 Water Blocking Connector 6mm 74 


9959 Adaptor Module 3 Multimode SC/PC duplex 71 

9955 Adaptor Module 3 Singlemode SC/APC duplex 71 

9954 Adaptor module 3 Singlemode SC/PC duplex 71 

9958 Adaptor Module 6 Multimode SC/PC simplex 71 

9957 Adaptor Module 6 Singlemode FC/PC simplex 71 

70452 Adaptor Module 6 Singlemode LC duplex 71 

70456 Adaptor Module 6 Singlemode SC/APC duplex 71 

9953 Adaptor Module 6 Singlemode SC/APC simplex 71 

70458 Adaptor module 6 Singlemode SC/PC duplex 71 

9952 Adaptor Module 6 Singlemode SC/PC simplex 71 

9956 Adaptor Module 6 Singlemode ST/PC simplex 71 

70457 Adaptor Module 8 Multimode SC/PC simplex 71 

70454 Adaptor Module 8 Singlemode SC/APC simplex 71 

70453 Adaptor Module 8 Singlemode SC/PC simplex 71 

71159 Cabinet, Fibre Distribution 62 

9799 Cabinet, Outdoor Street 62 

9358 Customer Connection Point (CCP) 61 

70664 Customer Connection Point (CCP) Compact 61 

Dome Closures and Accessories - HellermannTyton 63-66 

Dome Closures and Accessories - Tyco 67-68 

71063 Fibre Distribution Box - 16 Fibre 61 

70443 Fibre Patch Panel 2RU 48 Port 71 



9943 Fibre Patch Panel 6 to 24 Ports 71 

71144 Fibre Termination Box 12 Port, Wall Mount 70 

71443 Fibre and Tube Termination Box, 24 Port, Wall Mount 70 

70459 Fibre Unit Storage Box 61 

9945 Patch Panel 24 Ports Tube 3mm 71 

7361 Patch Panel 24 Ports Tube 5mm 71 

9518 Patchcord SC SM Simplex 69 

9519 Patchcord SCA SM Simplex 69 

9521 Pigtail SC SM 69 

9521B Pigtail SC SM (1.5m length) 69 

9520 Pigtail SCA SM 69 

9520B Pigtail SCA SM (1.5m length) 69 

7914T Splice protector, Crimp 69 



INDEX 

Index 

Accessories 


7610 Splice protector, Heat shrink 45mm 69 

71146 Splitter Box with modules, Rack Mounted 70 

71152 Splitter Box with modules, Wall Mount 70 

71145 Tube Management Box, Wall Mount 70 

9946 Tube or Patch Lead Guide 71 

Sub Duct Accessories 

073600 316 Compression Screw Connector 16mm Transparent 77 







71176 Duct Seal 32mm (1x12+1x10+1x7.5mm) 75 

71177 Duct Seal 32mm (3x10mm) 75 



71182 Duct Seal 40mm (2x15, 2x8.4-13.4mm) 75 




71187 Duct Seal 50mm (10x7+1x12mm) 75 


71183 Duct Seal 50mm (1x15, 5+3x12mm) 75 



71189 Duct Seal 63mm (24x7+1x14mm) 75 

072770 016 End Stop Connector size 16 76 










4410A Expanding Duct Plugs 24-30 78 

4410D Expanding Duct Plugs 29-38 78 

072698 032 Expanding Duct Plugs 32 78 



4410C Expanding Duct Plugs 76-88 78 

4410B Expanding Duct Plugs 87-102 78 

4410 Expanding Duct Plugs 100-110 78 

9351 Expanding Duct Plugs 148-162 78 

7897 Reducer 16-20mm 77 

7898 Reducer 16-25mm 77 

7899 Reducer 20-25mm 77 

7900 Reducer 20-32mm 77 

7901 Reducer 25-32mm 77 

7902 Reducer 25-40mm 77 

7904 Reducer 25-50mm 77 

7907 Reducer 25-63mm 77 

7903 Reducer 32-40mm 77 

7905 Reducer 32-50mm 77 

7908 Reducer 32-63mm 77 

7906 Reducer 40-50mm 77 

7909 Reducer 40-63mm 77 

7910 Reducer 50-63mm 77 

5037 Screw Connector 21mm 76 



3771C Screw Connector 31mm 76 

3650M Screw Connector 32mm 76 










Fibre Unit 

7779 Blowing Unit 80 

7655 Blowing Unit, Power Supply 82 

7286 Blowing Unit, Power Supply 240-110v 82 

7829 Blowing Pack 8 Fibre 80 

7830 Blowing Pack 12 Fibre 80 

7004 Coiler 1A 83 

7782 Coiler Extension 83 

7789 Coiler Fibre Guide 83 

7855 Dispenser 81 

7584 Fibre Plates 2/4 81 

7007 Fibre Plates 8 81 

7481 Fibre Plates 12 81 

7778 Flowmeter Kit 81 

7219 Glass Lens/Slips 84 

7033 Head Seal 84 

9006 Lead 85 

7851 Pan Guide 81 

7002 Pan Guide 1A 81 

7005 Pan Guide Support 82 

7788 Pan Inversion Clamp Ring 82 

7012 Pan Inversion Ring 82 

9004 Power Lead 24 volt DC 85 

9005 Power Lead 110 volt AC 85 

9003 Remote Control Unit 84 

7231 Roller Chain Assembly 83 

9002 Spares Kit 84 

7010 Tyres - Grooved Green 80 

7032 Tyres - Smooth Green 80 

7576 Tyres - White 80 

7228 Wheels - 4 fu 83 

7229 Wheels - 8 & 12 fu 83 

Fibre Unit and Mini Cable 

9226 Blowing Unit EM-25 86 

9471 Fusion Base Unit 86 

9472 Fusion Complete Parts Kit 86 

9227A Cable insert 1-3: for fi bre units 1-3mm 87 

9311 Cable Insert 4-8: for cables 4-8mm 87 

9221A Cable Seals for cables 3.4-4.3mm 87 

9221B Cable Seals for cables 4.4-5.3mm 87 

9221C Cable Seals for cables 5.4-6.3mm 87 


19998 40 Search Ball Electronic Marker orange, 101.4 kHz 78 

70336 Search Ball Electronic Marker red, 169.8 kHz 78 

7891 Straight Compression Connector 16mm 77 



3917P Straight Compression Connector 32mm 77 





073600 132 Straight Connector 32mm Hawle 77 



Tube Bundle Connectivity - External 

9604 1DB Joint 57 

7787A 1way DB Repair Joint: 3mm x 2.1mm microduct 58 

7787B 1way DB Repair Joint: 5mm x 2.1mm microduct 58 

7787C 1way DB Repair Joint: 5mm x 3.5mm microduct 58 

7787D 1way DB Repair Joint: 8mm x 6.0mm microduct 58 

7787E 1way DB Repair Joint: 10mm x 8.0mm microduct 58 

9027 Elongated Closure 2-way 50mm Straight In-Line 56 

200170032 Elongated Closure 4-way 32/32/32/32 56 

200170036 Elongated Closure 4-way 40/40/2x16/2x16 56 




70869 Elongated Closure 50mm 55 

9190 H-Branch Closure 54 

9501 In-Line Branch Closure (incl 6 way grommet) CLO1 55 

9049 In-Line Clamp Outlet 50mm 56 

7247 In-Line Closure 3A (without pressure valve) 55 

9045 In-Line Closure 50mm - Outlets 2x12mm 56 

9048 In-Line Closure 50mm 40/2x16mm Port Reducer 57 

9047 In-Line Closure 50mm 50/32mm Port Reducer 56 

9046 In-Line Closure 50mm 50/40mm Port Reducer 56 

19998175 Lead-in bushing 110mm w/foam rubber 57 

9076 Rapid Repair Kit 25/20mm 58 




073800132 Split connector 32mm 57 



073810132 Split connector : Half ducts 32mm - 2 metres (set) 57 

073810140 Split connector : Half ducts 40mm - 2 metres(set) 57 

073810150 Split connector : Half ducts 50mm - 2 metres (set) 57 

9112 Tube Distribution Closure: 12way DB 5mm Adaptor Branch Out or Straight joint 53 

9113 Tube Distribution Closure: 19way DB 5mm Adaptor Branch Out 53 


7717 Tube Distribution Closure: 6way Grommet up to 6 x 1DB 3mm or 5mm Branching 53 


7514 Tube Distribution Closure: Standard 53 

7954 Y- Branch 3mm 54 

9169 Y- Branch 5mm 54 

Tube Bundle Connectivity - External to Internal 

7500 Customer Lead In Point 59 

71486 Customer Lead In Point, MDU 59 

71502 Customer Lead In (Small), External 59 

71505 Customer Lead In (Medium), External 59 

71503 Customer Lead In (Large), External 59 

Tube Buncle Connectivity - Internal 

71501 Customer Lead In (Small), Internal 60 

71504 Customer Lead In (Medium), Internal 60 

7258 ITFP 3 port 60 

7217 ITFP 4 port 60 

9018 Y-Branch Closure (indoor) 60 

Tube Bundle Distribution Boxes 

19998401 Distribution box with connector 58 

19998403 Distribution box with 15/12mm outlet 58 

19998432 Distribution box, connector 32mm 58 




9221D Cable seals for cables 6.4-7.3mm 87 

9221E Cable Seals for cables 7.4-8mm 87 

9228A Duct Insert OD 3mm fi bre units up to 1.8mm 87 

9228B Duct Insert OD 4mm fi bre units up to 2.8mm 87 

9228C Duct Insert OD 5mm fi bre units up to 1.8mm 87 

9228D Duct insert OD 5mm fi bre units up to 2.8mm 87 

9228E Duct insert OD 6mm fi bre units up to 3mm 87 

9228F Duct insert OD 7mm fi bre units up to 1.8mm 87 

9228G Duct insert OD 8mm fi bre units up to 2.8mm 87 

9228H Duct insert OD 8mm fi bre units up to 3mm 87 

9222A Duct insert OD 7mm cables up to 4.8mm 87 

9222B Duct insert OD 8mm cables up to 3.8mm 87 

9222C Duct insert OD 8mm cables up tp 5.6mm 87 

9222D Duct insert OD 10mm cables up to 7.5mm 87 

9222E Duct insert OD 12mm cables up to 8.0mm 87 

9227D Lip Seals 0.9/7: for fi bre units 0.8-1.1mm 87 

9227B Lip Seals 1.2/7: for fi bre units 1.1-1.4mm 87 

9227C Lip Seals 2/7: for fi bre units 1.4-2.3mm 87 

9321A O Rings for OD 3mm 87 

9321B O Rings for OD 4mm 87 

9321C O Rings for OD 5mm 87 

9321D O Rings for OD 7mm 87 

9321E O Rings for OD 8mm 87 

9321F O Rings for OD 10mm 87 

9321G O Rings for OD 12mm 87 

9223A Steel Tyre U-groove for cables 3.1mm-3.5mm 87 

9223B Steel Tyre U-groove for cables 3.6-4mm 87 

9223C Steel Tyre U-groove for cables 4.1mm-4.5mm 87 

9223D Steel Tyre U-groove for cables 4.6mm-5mm 87 

9223E Steel Tyre U-groove for cables 5.1mm-5.5mm 87 

9223F Steel Tyre U-groove for cables 5.6mm-6mm 87 

9223G Steel Tyre U-groove for cables 6.1-6.5mm 87 

9223H Steel Tyre U-groove for cables 6.6mm-7mm 87 

9223J Steel Tyre U-groove for cables 7.1mm-7.5mm 87 

Minicable 

70899 Airstream Cable Blowing Machine 89 

9051 Airstream 1 metre sealing cord 89 

9026A Airstream Cable Collet Assembly - cable size 2.5 - 3.0mm 89 

9026B Airstream Cable Collet Assembly - cable size 3.0 - 3.8mm 89 

9026C Airstream Cable Collet Assembly - cable size 3.8 - 5.0mm 89 

9026D Airstream Cable Collet Assembly - cable size 5.0 - 6.4mm 89 




115 


FttX 

Customers 



Sub-Duct 

Accessories 


Tools 

Training 


Index


116 

Index 



9026E Airstream Cable Collet Assembly - cable size 6.4 - 8.0mm 89 

70908 Airstream Cable Collet Assembly - cable size 8.0 - 9.5mm 89 

71458 Airstream Cable Collet Assembly - cable size 9.5 - 11.0mm 89 

70904 Airstream Cable Guide 2.5mm 89 

70905 Airstream Cable Guide 2.6-3.5mm 89 



70909 Airstream Drive Belts 2.5-5mm Cable Diameter 89 

70910 Airstream Drive Belts 3-11mm Cable Diameter 89 

9028A Airstream Cable Seals - for cables 2.5 - 3.0mm 89 

9028B Airstream Cable Seals - for cables 3.0 - 3.8mm 89 

9028C Airstream Cable Seals - for cables 3.8 - 5.0mm 89 

9028D Airstream Cable Seals - for cables 5.0 - 6.4mm 89 

9028E Airstream Cable Seals - for cables 6.4 - 8.0mm 89 

70911 Airstream Cable Seals - for cables 8.0 - 9.5mm 89 

71459 Airstream Cable Seals - for cables 9.5 - 11.0mm 89 

70900 Airstream Tube Collet Assembly - tube OD 5mm 89 








70912 Airstream Tube Seal - Tube OD 5mm 89 








9051 Breeze 1 Metre Sealing Cord 91 

7409A Breeze Cable Blowing Machine 90 

9026A Breeze Cable Collet Assembly - cable size 2.5 - 3.0mm 90 

9026B Breeze Cable Collet Assembly - cable size 3.0 - 3.8mm 90 

9026C Breeze Cable Collet Assembly - cable size 3.8 - 5.0mm 90 

9026D Breeze Cable Collet Assembly - cable size 5.0 - 6.4mm 90 

9026E Breeze Cable Collet Assembly - cable size 6.4 - 8.0mm 90 

9025A Breeze Cable Guide - 2.5mm-3.8mm 90 

9025B Breeze Cable guide - 3.8mm-8.0mm 90 

70913 Breeze Microduct Seals 7mm 91 






9028A Breeze Spare Cable Seals - for cables 2.5 - 3.0mm 91 

9028B Breeze Spare Cable Seals - for cables 3.0 - 3.8mm 91 

9028C Breeze Spare Cable Seals - for cables 3.8 - 5.0mm 91 

9028D Breeze Spare Cable Seals - for cables 5.0 - 6.4mm 91 

9028E Breeze Spare Cable Seals - for cables 6.4 - 8.0mm 91 

9024A Breeze Tube Collet Assembly - tube OD 7mm 90 

9024B Breeze Tube Collet Assembly - tube OD 8mm 90 

9024C Breeze Tube Collet Assembly - tube OD 10mm 90 

9024D Breeze Tube Collet Assembly - tube OD 12mm 90 

9024E Breeze Tube Collet Assembly - tube OD 14mm 90 

9024F Breeze Tube Collet Assembly - tube OD 16mm 90 

9326 Breeze Unit Drive Wheels - Black 91 

Tools 


7833 Tool Kit 94 

9087 Tool Box 94 

7300 Brush Sash Tool 6A 96 

072699100 Cable Cutting Tool 95 

072699110 Cable Cutting Tool: Replacement Blades 95 

72799175 Chain Cutter Multi Duct 40-55mm 100 

72799176 Chain Cutter Multi Duct 40-50mm Extra Chain 100 

7236 Collet Locking Tool 96 

72799012 Cutter, Duct 3-14mm 97 

9346 Cutter, Heavy Duty 10-42mm 97 

7068 

7299 

7014 

72799008 

9344 

70935 

072799016 

072799167 

7562 

7298 

7064 

7001 

7001B 

7794 

9719C 

9719B 

9719A 

7949 

7301 

7071 

7039 

9345 

072799130 

072799150 

70108 

70108B 

9728 

9527 9728B 

7800 9342 

7505 7335 

70518 

70519 

72681050 

072681030 

Cutter, Heavy Duty 42mm 

Cutter, Microduct Rotational 

Cutter, Primary Tube 

Cutter, Primary Tube 8-12mm 

Diagonal Cutters 

Dismantling Knife 

Duct Clipper 3-16mm 

Duct Clipper 6-67mm 

Jacket Stripping Tool 

Junior Hacksaw 

Longitudinal Microduct Stripper 

Longitudinal Sheath Stripper 

Longitudinal Sheath Stripper: Replacement Blades 

Metal Free Cutter for 1DB 

Microcable FU Blades 

Microcable FU Bushes 


Microduct Rounding Tool 

Pliers Square Nose 

Rotational Sheath Stripper 

Scissors: Heavy Duty 

Screwdriver Pack 

Shears, Plastic 26mm 



Shears, Plastic 63mm spare blade 

Sheath Stripper 4.5-40mm 

Aerial Sheath Installation Stripper 4.5-40mm Training , Spare Blade 

Design Stripper, and Fibre Engineering 

Installation Stripper, Fibre and 10a Maintenance 

Stripper, Profi le 26-52mm 

Stripper, Profi le 45-75mm 

Tool, Aluminium Bevel 

Tool, Hand Bevel 

97 

96 

97 

97 

94 

95 

95 

95 

98 

96 

99 

95 

95 

94 

99 

99 

99 

96 

94 

95 

96 

96 

97 

97 

97 

97 

94 

105 94 

104 98 

104 98 

98 

98 

100 

99 

Training 


9527 

7800 

7505 

Aerial Installation Training 

Design and Engineering 

Installation and Maintenance 

107 

106 

106 


INDEX 


9050 Breeze Unit Drive Wheels - Red 91 

70848 Lubricant - Cable blowing lubricant 89 

5528 Mini cable fl eeting device 92 

70521 MiniJet 88 

70572 Mini-jet - Belt for MiniJet Flat 88 

70571 Mini-jet - Belt for MiniJet V 88 

70573 Mini-jet - Bundle Jetting Kit MD 2x10mm 88 

70566 Mini-jet Cable Caps for cables - 4mm 88 





70536 Mini-jet Cable Insert 4-5mm 88 




71460 Mini-jet Duct Inserts OD 7mm 88 













70574 Mini-jet Jetting Lube 88 

70540 Mini-jet Lip Seals 3.4 to 4.3mm 88 









70575 Mini-jet Microjetting Lube 88 

71463 Mini-jet O-rings for duct OD 7mm 88 











9980 UltimazV20 Base Unit 88 

Blowing Equipment Ancillaries 

7029 10 bar Electric Compressor 110v - 24volt output (UK yellow industrial plug) 92 

7757EU 10 bar Electric Compressor 240v - 24 volt output (European plug) 92 

7757 10 bar Electric Compressor 240v - 24 volt output (UK plug) 92 

7028 10 bar Petrol Compressor - 24 volt output 92 

9641 15 bar Air Preparation Kit 92 

7013 Replacement Air Hose 92 


072681040 Tool, Plastic Bevel 99 

72600025 Tool, Steel Bevel 25mm 100 





7069 Trimming Knife 95 

9341C Trolley for Coils 100 

72799055 Wrench for 40mm & 50mm 100 

Consumables 

7318A Blowing Beads 2/4 Fibre 101 

7512A Blowing Beads 8/12 Fibre 101 

7081 Cable Pull Sock 6-10mm 101 





7063 Cleaning Sponge 3.5mm 101 

7063A Cleaning Sponge 5mm 101 

7063B Cleaning Sponge 8mm 101 

7063C Cleaning Sponge 10mm 101 

7063D Cleaning Sponge 12mm 101 

71303 Cleaning Sponge 14mm 101 

7084 Connector Swivel 101 

70183 Fibre Grip Connector 5-3 103 



70207 Fibre Grip Microduct Rubber Stop 3.5/0.8mm x 100 102 

9873 Fibre Grip Microduct Rubber Stop 3.5/0.8mm x 500 102 

71350 Fibre Grip Microduct Rubber Stop 3.5/0.8mm split x 500 102 

9242 Lock & Block 30 x Two part Epoxy Adhesive Mixing Nozzle 103 

9731 Lock & Block 12mm Kit 103 

9313 Lock & Block 5mm Kit 103 

9730 Lock & Block Locking Stem x 50 103 

9312 Lock & Block Resin Blocking Stems x 100 103 

9240 Lock & Block Two Part Epoxy Adhesive 103 

9241 Lock & Block Two Part Epoxy Adhesive Dispensing Gun 103 

70575 Lubricant 104 

9230 7741 Mini Mille-Tie Cable Installation 105 104 

9231 70688 Train Resin the Pack Trainer 10B 105 101 

7077 Resin Pack 9B 101 



7087 Shear Pin 4.5kN 101 

71122 Swivel 22mm, Fused 101 


9230 

9231 

Mini Cable Installation 

Train the Trainer 

107 

107 



For information on our local sales offices, 

please contact us at info@emtelle.com 

or visit our website at www.emtelle.com 

www.fibre-to-the-home.com 

I N N O V A T I O N A N D F L E X I B I L I T Y

Tube Bundle Connectivity - Emtelle Scandinavia A/S

Create successful ePaper yourself

Delete template?

Save as template?